Saturn LS1 Clutch is not fully disengaging Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(11)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(11)

Clutch is not fully disengaging Inspection Service

How much does a Clutch is not fully disengaging Inspection cost?

On average, the cost for a Saturn LS1 Clutch is not fully disengaging Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Saturn LS1L4-2.2LService typeClutch is not fully disengaging InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Saturn LS1 Clutch is not fully disengaging Inspection prices

Your car’s clutch is what allows you to change gears. When you press the clutch pedal, the clutch moves away from flywheel, stopping the rotation and allowing you to shift to a higher or lower gear without causing damage (grinding gears does your transmission no good at all). When you release the clutch pedal, the clutch should press up against the flywheel and you should be able to proceed in the newly selected gear. However, there are some situations in which the clutch may not fully disengage.

How this system works:

To put it in a nutshell, clutches work based on friction. When the clutch pedal is pressed, either a cable or a piston (depending on the type of clutch is installed in your vehicle) will push the release fork. This causes the throw out bearing to press against the diaphragm spring.

The center of the spring is pushed in, which engages a series of pins. These pull the pressure plate away from the clutch disc and separate the clutch from the engine flywheel. When you take your foot off the pedal, the reverse happens, and the clutch is engaged.

Clutch components are subject to a significant amount of wear and tear (because they work on friction – this is normal). The most common problem here is the disc wearing. The material is a lot like what you’ll find on your brake pads, and the operating concept is also very similar. Of course, that creates slippage, which isn’t the problem here. Failure to disengage is called “sticking”, and there are several potential causes.

Common reasons for this to happen:

  • Stretched/Broken Clutch Cable: If the clutch cable is broken or stretched, then the clutch will stick (not disengage). You’ll notice the sticking becoming more and more common as the cable continues to stretch.

  • Leaking Hydraulic System: If you have a hydraulic clutch, it’s possible that either the slave or master cylinder (or both) is leaking. This means that insufficient hydraulic pressure is built up for the clutch system to operate correctly.

  • Misadjusted Linkage: The linkage connects the clutch pedal to the transmission. If it’s incorrectly adjusted, the clutch may not disengage properly.

  • Incompatible Aftermarket Parts: If you’ve recently had clutch work done, it’s possible that aftermarket components were installed in your car. Not all aftermarket parts will work correctly with your clutch, and this can cause it to not fully disengage.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the entire clutch system and determine the source and cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to inspect the clutch, as well as the cable or hydraulic system. Both a visual inspection and a test drive may be required. Once the underlying cause has been determined, the mechanic will recommend the next step.

How important is this service?

If your clutch is not fully disengaging, it means that the flywheel and clutch disc are not fully separating. This causes additional wear not only on the clutch material, but on other components in the system (including the input shaft).

The best defense against transmission problems is to ensure that you work with a reputable mechanic for general maintenance who can inspect and troubleshoot problems as they arise. It’s also important to ensure that any aftermarket clutch components installed are fully compatible with your vehicle. If you’re experiencing problems with the clutch not fully disengaging, one of our professional mechanics can inspect and repair the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(11)

Rating Summary
10
0
0
0
1
10
0
0
0
1

Rey

25 years of experience
103 reviews
Rey
25 years of experience
Saturn LS1 L4-2.2L - Brake Pads Replacement (Front) - Ventura, California
went above and beyond

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Saturn LS1 L4-2.2L - AC Air Filter - Oakland, California
josh was great

Joshua

16 years of experience
12 reviews
Joshua
16 years of experience
Saturn LS1 L4-2.2L - Turn Signal Switch - Thonotosassa, Florida
Excellent! On Time, Fast,Clean...Perfect! I will tell family and friends about "Your Mechanic"

John

27 years of experience
1027 reviews
John
27 years of experience
Saturn LS1 L4-2.2L - Car is not starting - Pasadena, Texas
Great mechanic and very honest! I love to deal with people like him who will tell you exactly what's wrong, are efficient and do right by their clients.

Excellent Rating

(11)

Rating Summary
10
0
0
0
1
10
0
0
0
1
Number of Saturn LS1 services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Volkswagen Passat TDI
It It might look just like the regular Passat, but the 2012 Volkswagen Passat TDI is the kind of practical sedan that even the most hardcore car enthusiasts can get excited about. Why? While it looks like a mid-size family...
The Traveler’s Guide to Driving in Indonesia
Indonesia Indonesia has a number of attractions (https://www.tripadvisor.com/Attractions-g294225-Activities-Indonesia.html) that draw in tourists all year long. When you vacation in the country, you might want to head to Waterbom Bali, a water park, where you can beat the heat. You can...
P0260 OBD-II Trouble Code: Injection Pump Fuel Metering Control “B” Intermittent (Cam/Rotor/Injector)
P0260 P0260 code definition Injection Pump Fuel Metering Control “B” Intermittent (Cam/Rotor/Injector) What the P0260 code means P0260 is an OBD-II generic code that the injection pump fuel metering control valve circuit has intermittent current flow when the engine control...

Rear brakes are dragging

Based on your description, it sounds like your parking brake may be locking up on your rear brakes. I would recommend having your rear brakes disassembled and, using the special tool you referred to, try to compress the caliper. If...

Check Engine Light was on with a gas smell. I took it to the dealer.

I would ask what codes they found and how they determined the fuel pump was the cause. They likely diagnosed the pump by measuring fuel pressure. You didn't say what kind of Hyundai you have, but generally, fuel pressure should...

I have a 97 Buick century and when I'm driving the speedometer is bouncing and when I'm driving it starts to jerk sometimes

If the vehicle speed is constant, but the speedometer reading is erratic, there is a fault in the gauge cluster or in the signal from the transmission. If, though, you are referring to erratic engine operation, perhaps just at low...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com