logo

Saturn L300 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(43)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(43)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Saturn L300 Control Arm Assembly Replacement is $228 with $88 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Saturn L300L4-2.2LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$532.46Shop/Dealer Price$584.73 - $722.91
2001 Saturn L300V6-3.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$511.74Shop/Dealer Price$559.94 - $695.08
2003 Saturn L300V6-3.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$823.94Shop/Dealer Price$950.25 - $1319.58
2004 Saturn L300V6-3.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$720.14Shop/Dealer Price$820.50 - $1111.97
2004 Saturn L300V6-3.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$823.94Shop/Dealer Price$953.64 - $1325.51
2004 Saturn L300V6-3.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$823.94Shop/Dealer Price$950.57 - $1320.14
2004 Saturn L300V6-3.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$511.74Shop/Dealer Price$560.04 - $695.24
2002 Saturn L300V6-3.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$511.74Shop/Dealer Price$560.00 - $695.17
Show example Saturn L300 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Saturn L300 services completed
473+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(43)
Rating Summary
42
0
0
0
1
42
0
0
0
1

David

17 years of experience
639 reviews
Request David
David
17 years of experience
Request David
by Kenneth
Saturn L300 V6-3.0L - Oil Change - Fairfield, California
I was very happy with David work...

Theodore

17 years of experience
1794 reviews
Request Theodore
Theodore
17 years of experience
Request Theodore
by Benjamin
Saturn L300 V6-3.0L - Fuel Pump - Bothell, Washington
I've been using Theodore for about five appointments by now. He is always extremely objective and helpful. I've never trust a mechanic the way I trust Theodore.

David

17 years of experience
639 reviews
Request David
David
17 years of experience
Request David
by Kenneth
Saturn L300 V6-3.0L - Oil Pressure Sensor - Fairfield, California
David has worked on my Saturn at least 3 times and I'm always very happy with his work..!!

Kanstantsin

20 years of experience
192 reviews
Request Kanstantsin
Kanstantsin
20 years of experience
Request Kanstantsin
by Mike
Saturn L300 L4-2.2L - Car is not starting - Littleton, Colorado
Konstantin was very helpful and knowledgeable. He was kind and explained what the issue was.

Excellent Rating

(43)
Rating Summary
42
0
0
0
1
42
0
0
0
1
Number of Saturn L300 services completed
473+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

P0925 OBD-II Trouble Code: Gear Shift Reverse Actuator Circuit Range/Performance
P0925 means there was an abnormal voltage reading from the gear shift reverse actuator circuit due to faulty reverse gear guide rail or shift shaft.
Read more
P0242 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit High
P0242 P0242 code definition Turbocharger Boost Sensor B Circuit High What the P0242 code means P0242 is a generic OBD-II code which indicates that the engine control module (ECM) detected the intake boost pressure sensor B input circuit out of...
Read more
How to Get Lexus Dealership Certified
Lexus dealerships offer automotive technician jobs to those who are Lexus certified through UTI’s Toyota Professional Automotive Technician program.
Read more

Car maintainence

Hi, thanks for writing in. You will need to have a mechanic scan the computer to see what codes are stored and pressure test the oil pressure to see if it is a sensor or internal engine problem. The tire...
Read more

Car revs a little when driving in 4th gear

What you are describing is often a sign of low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or a faulty transmission control solenoid. As you know, automatic transmissions use pressurized hydraulic fluid to change gears. Every time a gear change is required, the car's...
Read more

Many oil questions

You can use 5w20, 5w30 or 10w30 oils in this engine. The lower numbers are for colder climates or winter months use 5w20.
Read more
  1. Home
  2. Estimates
  3. Saturn
  4. L300
  5. Control Arm Assembly Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com

Read FAQ
GET A QUOTE