Saturn L200 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(63)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(63)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Saturn L200 Wheel Bearings Replacement is $228 with $88 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Saturn L200L4-2.2LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$424.66Shop/Dealer Price$474.59 - $611.40
2001 Saturn L200L4-2.2LService typeWheel Bearings - Driver Side Front ReplacementEstimate$410.24Shop/Dealer Price$457.34 - $592.04
2003 Saturn L200L4-2.2LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$536.03Shop/Dealer Price$635.40 - $929.32
2002 Saturn L200L4-2.2LService typeWheel Bearings - Driver Side Front ReplacementEstimate$410.24Shop/Dealer Price$457.38 - $592.11
2002 Saturn L200L4-2.2LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$410.24Shop/Dealer Price$459.74 - $596.23
2003 Saturn L200L4-2.2LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$410.24Shop/Dealer Price$457.61 - $592.50
2003 Saturn L200L4-2.2LService typeWheel Bearings - Driver Side Front ReplacementEstimate$410.24Shop/Dealer Price$457.41 - $592.15
Show example Saturn L200 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(63)

Rating Summary
56
3
1
1
2
56
3
1
1
2

Behrak

7 years of experience
218 reviews
Behrak
7 years of experience
L200 2003 - Headlight Bulb - Lawrenceville, GA
Was prompt, early, and made the mechanical problem seem like no big deal. Was finished before the time he was scheduled to arrive. Would refer and use again.

Lucas

10 years of experience
1083 reviews
Lucas
10 years of experience
L200 2003 - Cabin Air Filter - Los Angeles, CA
Arrived on time and was very friendly

Excellent Rating

(63)

Rating Summary
56
3
1
1
2
56
3
1
1
2
Number of Saturn L200 services completed
693+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

What are the Types of Brake Fluid?
Dot 3, Dot 4, and Dot 5.1 brake fluids are most common in modern vehicles. They differ in wet and dry boiling points.
How to Troubleshoot a Power Moon Roof That Won't Open
Car moon roofs won't open if the tracks are clogged or the cables, electric motor, or moon roof switch is broken.
How to Buy Good Quality Doors
It It happens to the best of us – accidents, shopping carts, the dings and weathering of time take their toll on your car door and soon you may find yourself shopping for a new one. The kind of car...

Tapping sound near brake pedal.

The clicking noise is one of the relays under the left side of the dash cycling on and off. I have seen aftermarket alarm relays do this and this may be the reason it is killing the battery. Most factory...

Front wiper stopped working and is making a ticking noise

Hi there. From the description you have given, it would appear, the front wiper motor may still be operating. The ticking noise could be, the motor turning and wiper linkage is disconnected (https://www.yourmechanic.com/services/windshield-wiper-linkage-replacement). You could attempt to get a visual...

Transmission problems.

Hello. From what you describe it would appear that your vehicle may be experiencing more than one issue. If the engine is stalling and jerking when you put it into gear then it may be possible that there is an...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com