Saab 9-3X Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(404)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(404)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Saab 9-3X Power Steering Pressure Hose Replacement is $624 with $274 for parts and $350 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Saab 9-3XL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$971.38Shop/Dealer Price$1126.35 - $1571.01
2010 Saab 9-3XL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$912.94Shop/Dealer Price$1054.51 - $1468.92
Show example Saab 9-3X Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saab mechanics

Real customer reviews from Saab owners like you.

Excellent Rating

(404)

Rating Summary
375
13
6
3
7
375
13
6
3
7

Jason

12 years of experience
97 reviews
Jason
12 years of experience
Saab 9-3 L4-2.0L Turbo - Power Steering Pressure Hose - Mesa, Arizona
Great guy that did a great job! He was the perfect mechanic to do my power steering job! Thank you Jason!

Nathaniel

17 years of experience
101 reviews
Nathaniel
17 years of experience
Saab 9-3 L4-2.0L Turbo - Inspection / Diagnostics - Marietta, Georgia

Jeremiah

23 years of experience
61 reviews
Jeremiah
23 years of experience
Saab 9-3 L4-2.0L Turbo - Oil Change - Dallas, Texas

Jeremy

21 years of experience
802 reviews
Jeremy
21 years of experience
Saab 900 L4-2.1L - Car shudders when turning Inspection - West Palm Beach, Florida
My car is a collector’s Saab of which only 300 were made, all in 1991. Jeremy was on time, prepared and super-competent. Diagnosed the issue, explained why he was confident in his diagnosis, checked lots of other things and reported on the general condition of this rare car. Friendly and professional. I highly recommend him.

Excellent Rating

(404)

Rating Summary
375
13
6
3
7
375
13
6
3
7
Number of Saab services completed
4444+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saab MECHANICS
200+
experts on our platform

Recent articles & questions

C1100 OBD-II Trouble Code: ABS Pump Switch Circuit Failure
Trouble code C1100 means the engine control unit (ECU) has registered an unspecified circuit failure in the ABS pump switch circuit.
Understanding the Honda Maintenance Minder System and Lights
Car symbols, or dashboard lights, are a car service reminder. The Honda Maintenance Minder codes indicate when and what service your car needs.
The Meanings of Automatic Gear Shift Letters & Numbers
A break down “PRNDL” and all its varieties, including D1, D2, and D3 modes.

Rattling noise rpm jump

Hello there. It sounds like there may be a few things going on. The noise could be a number of things, such as the belt idler, engine misfire, injectors (https://www.yourmechanic.com/services/fuel-injector-replacement), engine mechanical damage, or the turbo. A rattling noise is...

My abs and brakes light is on..

Hello. I usually start by checking the brake fluid level and the level sensor. Most of the time when these lights are on together it is because of low fluid. If the fluid level is good and if the sensor...

No warning lights, no smoke even when under load, turbo working, intercooler ok, injectors cleaned, no power, all filters clean.

Some possibilities are low engine compression, defective throttle position sensor, a timing advance malfunction, fuel pressure problem, vacuum leak, malfunctioning oxygen sensors and so forth. Of course, it's possible that you could have a combination of faults. Please note that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com