Ram ProMaster 3500 Cruise control is not working Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5)

Cruise control is not working Inspection Service

How much does a Cruise control is not working Inspection cost?

On average, the cost for a Ram ProMaster 3500 Cruise control is not working Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Ram ProMaster 3500V6-3.6LService typeCruise control is not working InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2018 Ram ProMaster 3500L4-3.0L Turbo DieselService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Ram ProMaster 3500V6-3.6LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Ram ProMaster 3500L4-3.0L Turbo DieselService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2015 Ram ProMaster 3500V6-3.6LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2014 Ram ProMaster 3500V6-3.6LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2019 Ram ProMaster 3500V6-3.6LService typeCruise control is not working InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2021 Ram ProMaster 3500V6-3.6LService typeCruise control is not working InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ram ProMaster 3500 Cruise control is not working Inspection prices

Cruise control can be very convenient when on a long drive or when on the highway. By setting a speed, you can relax your foot and let the vehicle maintain speed. More modern cruise control systems even allow you to maintain speed and a certain distance behind the vehicle in front of you. When cruise control fails, it can be annoying, but when it fails suddenly it may be dangerous. A sudden failure by the cruise control may mean your vehicle is rapidly decelerating. Even when cruise control is on, it is important to remain a vigilant driver.

How this system works:

Cruise control systems have changed as cars have become more modern. Newer cars use a fully electronic setup to maintain speed and may be able to maintain speed and distance behind the car in front of you. These systems are controlled through the vehicle’s computer or ECU (electronic control unit). Older cars may use what is called electromechanical cruise control. In this setup, a vacuum actuator is physically connected to the throttle by a cable or chain. The cable adjusts to increase or decrease throttle position based upon the actions of the actuator. A mechanic will let you know what kind of setup you have on your vehicle.

Common reasons for this to happen:

  • Bad Fuse: Like many electronically controlled systems in your car, the cruise control has a corresponding fuse which will blow to protect the system if it senses a short circuit. When the fuse of for the cruise control blows, the cruise control will stop working altogether.

  • Failing Brake Pedal Switch: The brake pedal switch turns on the vehicles brake lights when it senses that the brake pedal has been pressed. Because cruise control systems have been designed to disengage when the brake pedal is pressed, the cruise control is wired to the brake pedal switch. If the brake pedal switch fails, the car may think the brakes are engaged and not allow the cruise control system to turn on.

  • Failing Speed Sensor: A speed sensor has many purposes including indicating the speed of the vehicle, regulating flow of fuel and ignition timing, and operating the cruise control. If the speed sensor fails the cruise control may stop working. You may also notice that the speedometer has stopped working and the engine has more difficulty when idling.

  • Damaged Vacuum Actuator/Hoses/Cable: On older vehicles, cruise control speed is maintained using a vacuum actuator and a cable connected to the throttle. A vehicle’s cruise control may stop working if the vacuum actuator has stopped working or if there is damage to the vacuum hoses. The system may also fail if the cable linking the actuator to the throttle is broken.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s cruise control system has stopped working. The mechanic will then provide a detailed inspection report outlining the nature of the system failure and the cost of any repairs that need to be made.

How it's done:

The mechanic will first want to connect to the vehicle’s ECU through a code reader/scanner. This will allow the mechanic to read and trouble codes and better diagnose what component may have failed.

If the mechanic determines that there is a bad fuse, he or she will find the corresponding fuse for the cruise control system to see if it has failed. If the fuse has blown, the mechanic will remove it and replace it with a fuse rated for the correct amperage.

If the mechanic believes that the brake pedal switch has failed, he or she will examine the switch to check for any superficial damage. The mechanic should then check the wiring connected to the switch and change it if necessary. When the switch has been replaced, the mechanic should make sure that both the brake lights and the cruise control system are working properly.

To check the speed sensor, the mechanic will have to get underneath the vehicle. While underneath, the mechanic will find the sensor and examine it and the surrounding wires for damage. The mechanic will then replace the sensor and then check the wires going from the sensor up to the speedometer and cruise control switches to endure that they are not frayed.

If the mechanic believes that the vacuum actuator or the corresponding hoses and cable have failed, he or she will open the hood and locate the actuator. The mechanic will first check the hoses and cable to make sure that they are in good working order. He or she will then replace the actuator as necessary.

In all of these repair scenarios the mechanic will ask to test drive the vehicle to make sure that the cruise control is working properly. He or she should also use their code reader/scanner to clear any trouble codes that may have been produced when the cruise control system was not working.

How important is this service?

A failed cruise control system can be a signal that other repairs may need to be made soon. By examining the cruise control, the mechanic is likely to also inspect other systems on the car including the brake lights and speedometer. While driving without cruise control may be an inconvenience, a sudden failure of the cruise control system could be potentially dangerous for a driver who is not vigilant. If you notice that your vehicle’s cruise control has stopped working you should have a mechanic check it to determine the nature of the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Steve

15 years of experience
149 reviews
Steve
15 years of experience
Ram ProMaster 3500 V6-3.6L - Serpentine/Drive Belt Replacement - Glen Ridge, New Jersey
Steve was prompt and knowledgeable. I was impressed by his professionalism and ability to get the work done in a tight spot where the vehicle was parked.

Andrew

15 years of experience
506 reviews
Andrew
15 years of experience
Ram ProMaster 3500 V6-3.6L - Oil Change - La Center, Washington
Good job,

Pierre

9 years of experience
309 reviews
Pierre
9 years of experience
Ram ProMaster 3500 V6-3.6L - Car Starter Repair - Quincy, Massachusetts
Pierre was communicative, transparent, and committed to finding answers to my problem. Even though he was not able to fix the problem, I had more information to bring to a mechanic than ever before and am more informed about where the problem is coming from. Highly recommend!

Stephen

32 years of experience
178 reviews
Stephen
32 years of experience
Ram ProMaster 3500 L4-3.0L Turbo Diesel - Car does not move when I step on the gas pedal Inspection - Denver, Colorado
arrived on time and was very complete

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Ram ProMaster 3500 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing EVP Position Sensor
Common signs include poor cold start performance, the Check Engine Light coming on, and failing an emissions test.
What Does the Electronic Stability Control (ESC) Warning Light Mean?
The ESC warning light is designed to help drivers in case they lose steering control by retaining control of the brakes and engine power in the car.
How to Dispose of Brake Fluid
Brake fluid is potentially toxic and always flammable. Safely dispose of brake fluid at home, a recycling center, or waste treatment facility.

AC blowing through defrost vents

So maybe we should start with what problems you don't have. Just Kidding. Let's start with the Defroster. The problem is probably the vacuum box under the hood may be damage or a vacuum line connecting to it could be...

I need a alternator my Vin is 1GCGK23U44F245647 could you tell me if I need a 105 or 145 amp

Assuming the alternator is original, and thus has never been replaced or substituted with a part that is non-original, you can quickly tell which one you have by reading the tag on the alternator. You will see a tag that...

Reduced Power and P0601 code is found in computer.

Hi there. The P0449 (https://www.yourmechanic.com/article/p0449-obd-ii-trouble-code-evaporative-emission-control-system-vent-valve-solenoid-circuit-malfunction-by-spencer-clayton) evaporative code is on for either an electrical circuit malfunction to the vent solenoid or the vent solenoid on the emissions circuit has failed. The P0601 (https://www.yourmechanic.com/article/-p0601-obd-ii-trouble-code-internal-control-module-memory-check-sum-error-by-spencer-clayton) code comes on when the computer can no...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com