Ram ProMaster 2500 Car is slow to accelerate Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(7)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(7)

Car is slow to accelerate Inspection Service

How much does a Car is slow to accelerate Inspection cost?

On average, the cost for a Ram ProMaster 2500 Car is slow to accelerate Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Ram ProMaster 2500V6-3.6LService typeCar is slow to accelerate InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2016 Ram ProMaster 2500V6-3.6LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2015 Ram ProMaster 2500V6-3.6LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 Ram ProMaster 2500L4-3.0L Turbo DieselService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2017 Ram ProMaster 2500L4-3.0L Turbo DieselService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2020 Ram ProMaster 2500V6-3.6LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Ram ProMaster 2500L4-3.0L Turbo DieselService typeCar is slow to accelerate InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2019 Ram ProMaster 2500V6-3.6LService typeCar is slow to accelerate InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ram ProMaster 2500 Car is slow to accelerate Inspection prices

A car that is getting fuel and is properly tuned should take off quickly when the accelerator is pressed. A vehicle that is sluggish or slow to accelerate can be dangerous, especially at intersections and on-ramps.

Modern cars have a very complex system that delivers fuel to the engine and rids of the vehicle of exhaust gases. A failure in any part of this system can lead to a car that is slow to accelerate. In the majority of cases, the problem can be traced back to the fuel system.

A vehicle that is slow to accelerate should be repaired immediately as it can be dangerous to drive.

How this system works:

The fuel system is responsible for supplying fuel to the engine. Fuel is mixed with air, atomized and vaporized in the intake system, which provides power to drive the pistons of the engine. There are a variety of different fuel system types but most of them have the same basic parts.

The fuel tank stores the gasoline. Fuel is pulled through the fuel lines by the fuel pump and is fed into the fuel injectors. Older cars have a carburetor and throttle body injectors instead of fuel injectors. The fuel injectors spray gasoline into the cylinders where it is mixed with air and then ignites during the compression stage. The result is an explosion that moves the pistons.

Common reasons for this to happen:

  • Bad or Clogged Fuel Injector: Fuel injectors can become clogged due to contaminates in the fuel. Fuel injectors, by their very nature, must be very precise in controlling the amount of fuel that goes into the combustion chamber so they have very small passages that deliver the fuel. Over time these tiny passages will become clogged which impedes the delivery of fuel.

When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly or feel that it does not have enough power. Other symptoms include a rough idle, a vehicle that is hard to start and a decrease in fuel efficiency.

  • Defective Fuel Pump: The fuel pump pulls the fuel from the gas tank to the engine via the fuel lines. If the pump stops working, malfunctions, or becomes clogged, it will not supply enough fuel to the injectors. This can cause the vehicle to accelerate slowly, or even sputter and stall, especially at high speeds.

  • Clogged Fuel Filter: The job of the fuel filter is to filter out containments in the fuel and if it becomes clogged it can restrict the amount of fuel that reaches the injectors. This can cause a vehicle to accelerate slowly. Fuel filters are designed to be replaced on a regular basis.

  • Dirty Airflow Sensor: This part detects the mass of air that enters the fuel injection system and hands that information off to the engines’ computer which allows the computer to deliver the proper amount of fuel to the air. These sensors can become dirty or malfunction over time, which results in the wrong data being sent to the computer. A slow accelerating car is the result of this incorrect data. It may also trigger the Check Engine light.

  • Leaking Fuel Line: A leak in the fuel line will drain off enough fuel that it leaves a shortage for the injectors. This not only affects the performance of the car but will also create a dangerous situation. If you smell gasoline in the vicinity of the car or see a puddle of fuel underneath the vehicle, the car should be inspected and repaired immediately.

  • Vacuum Leak: A leak in the vacuum system can affect the ability of the car’s computer system to properly regulate the fuel to air ratio. One of the major symptoms of a vacuum leak is a car that is slow to accelerate or feels like it has a lack of power. In addition the check engine light will probably illuminate.

  • Failing Catalytic Converter: A failing or clogged catalytic converter will prevent the proper amount of air from going into the engine. In most cases the vehicle will run hotter than normal, will accelerate slowly and feel like there is a loss of power. Issues with the catalytic converter tend to be fairly expensive repairs.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the car is slow to accelerate issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car's fuel system for leaks and any defective parts. This includes fuel injectors, fuel pump, fuel filter, airflow sensors and other important components related to the vehicle's slow acceleration. It may be necessary to test drive the car in order to verify the acceleration issue and provide an accurate diagnosis.

How important is this service?

A car that accelerates slowly is a dangerous vehicle to drive, especially at intersections and on ramps. Failing to fix simple fuel system problems will often lead to a more expensive repair down the road and eventually a car that may not run at all. A slow accelerating car should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

David

10 years of experience
193 reviews
David
10 years of experience
Ram ProMaster 2500 V6-3.6L - Alternator - Mount Laurel, New Jersey
david is awesome , fixed my problem with alternator, friendly and professional

Joseph

13 years of experience
43 reviews
Joseph
13 years of experience
Ram ProMaster 2500 V6-3.6L - Battery - Lacey, Washington
Awesome friendly service thank you!!!

Brian

23 years of experience
676 reviews
Brian
23 years of experience
Ram ProMaster 2500 L4-3.0L Turbo Diesel - Strut Assembly Replacement (Front) - Fernandina Beach, Florida
I was hesitant to book through YourMechanic because I knew nothing about it prior to finding it through an internet search, were the reviews even real? Well this review is real because I took a chance and Booked Brian based on his very good reviews. I have a RAM Promaster 2500 Diesel commercial van that has challenged even the RAM dealerships that I have previously used for service. The strut installation required removing parts of the dash in order to access bolts at the top of the strut assemblies. My initial skepticism of Brian and YourMechanic led my to download detailed instructions about how to remove the dash assemblies. When asked, Brian indicated that he didn't need the instructions. I let him continue, fully expecting him to eventually ask for the directions for this unique installation. Before I knew it, Brian had neatly removed the necessary parts that allowed him to access the required bolts; Brian's method was actually more effective than the method in my downloaded instructions. Brian did such a great job on my suspension that I booked him for the rest of the day to replace my rear brakes. My wife's car was also making noises and Brian diagnosed the issue very quickly. Finding a reliable and knowledgeable mechanic can be difficult. I've now found one in Brian and will continue to use Brian as needed in the future. In fact I plan to book him soon to service our other vehicle. I highly recommend Brian.

Torrieanto

12 years of experience
632 reviews
Torrieanto
12 years of experience
Ram ProMaster 2500 V6-3.6L - Car Battery Replacement - Largo, Florida
Fast, efficient and personable.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Ram ProMaster 2500 services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing AC Low Pressure Hose
Check for crimps, kinks, and traces of refrigerant on the hose. A failing AC low pressure hose may cause a lack of cold air from the AC system.
How Long Does a Universal Joint (U-Joint) Last?
For For most rear wheel drive cars, a driveshaft is needed to ensure that the tires turn as they should. The driveshaft works by taking the power from the transmission and transferring it to the wheels of the vehicle. In...
P0797 OBD-II Trouble Code: Pressure Control Solenoid C Stuck On
P0797 means that there is a problem in one of the electronic pressure control solenoids or circuits due to a faulty solenoid, or low or dirty fluid.

ABS/CV axle problems after installing new axles.

Hi there. The hubs to the vehicle are designed with the harness in the middle of them for the ABS sensors (https://www.yourmechanic.com/services/abs-speed-sensor-replacement). You may have installed the wrong CV axles (https://www.yourmechanic.com/services/axle-cv-shaft-assembly-replacement). The replacement CV axles for the vehicle are a...

Engine died while driving, won’t start, but it will turn over

You should first have computer scanned to see if there is stored codes for one of the engine sensors like the crankshaft sensor or camshaft sensor to fix the no start.

Steering wheel shakes at 80kmp

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com