Pontiac Trans Sport Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Pontiac Trans Sport Power Steering Pressure Hose Replacement is $184 with $44 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Pontiac Trans SportV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$325.04Shop/Dealer Price$371.15 - $501.38
1994 Pontiac Trans SportV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$337.19Shop/Dealer Price$376.42 - $488.76
1993 Pontiac Trans SportV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$297.29Shop/Dealer Price$336.97 - $451.84
1995 Pontiac Trans SportV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$379.82Shop/Dealer Price$405.50 - $474.16
1993 Pontiac Trans SportV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$366.77Shop/Dealer Price$415.34 - $551.33
1994 Pontiac Trans SportV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$297.29Shop/Dealer Price$337.11 - $452.09
1991 Pontiac Trans SportV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$316.03Shop/Dealer Price$360.41 - $489.35
1999 Pontiac Trans SportV6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$426.13Shop/Dealer Price$491.09 - $680.97
Show example Pontiac Trans Sport Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Whitney

40 years of experience
783 reviews
Whitney
40 years of experience
Pontiac Trans Sport V6-3.4L - inpsection - San Jose, California

Chris

12 years of experience
83 reviews
Chris
12 years of experience
Pontiac Trans Sport V6-3.4L - Brake Pads Replacement (Front) - Indianapolis, Indiana
Excellent! Friendly, and well experienced. He left here leaving me with good information about some things that I must do to my 1998 Pontiac Van to get it into good order while we continue to put away money to purchase a new car. One heck of a great guy. I recommend him whole heartedly! Sincerely, Howard C.

Chris

17 years of experience
419 reviews
Chris
17 years of experience
Pontiac Trans Sport V6-3.4L - Wipers are not working - Daly City, California
Chris arrived early for our appointment. He was able to diagnosed what's wrong with the vehicle. Very polite and professional.

Maxwell

19 years of experience
390 reviews
Maxwell
19 years of experience
Pontiac Trans Sport V6-3.4L - Serpentine/Drive Belt - Cypress, Texas
Friendly, professional, and efficient. He showed up on time, did the work very swiftly, and helped me plan my next service.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Pontiac Trans Sport services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

The Guide to Legal Car Modifications in Oregon
ARENA Creative / Shutterstock.com If you live in Oregon or will do so in the near future, you need to make sure you understand the laws concerning modified vehicles. The following information will help you keep your...
Symptoms of a Bad or Failing High Pressure Safety Valve
Common signs include the Oil Pressure Light illuminating, increased engine noise, and oil pressure dropping.
Symptoms of a Bad or Failing Anti-Lock Relay
If your Check Engine or ABS Lights turn on, or you experience unexpected wheel lock, you may need to replace the anti-lock relay.

I cannot get my bluetooth to work

Hello, having a convenience feature not working properly can be annoying, especially when it has to do with the entertainment system. It appears that Mazda has recognized this issue in Technical Service Bulletin (TSB 09-008/15) to resolve issues with the...

Car only runs 10 minutes before overheating - 1994 Acura Vigor

A head gasket can fail in a few ways and yes one will leak oil into the cooling system. A technician can check coolant flow with a temperature gun by taking temperatures at opposite ends of the hoses and engine...

Starter keeps spinning after Engine is on

It is possible that there could be an issue with your ignition switch. If the ignition switch is stuck in the start position even after the engine has been started, this can cause the starter to continue turning with the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com