logo

Pontiac Trans Sport Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(7)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Pontiac Trans Sport Control Arm Assembly Replacement is $199 with $59 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Pontiac Trans SportV6-3.4LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$753.64Shop/Dealer Price$903.39 - $1343.71
1998 Pontiac Trans SportV6-3.4LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$354.11Shop/Dealer Price$404.51 - $551.16
1995 Pontiac Trans SportV6-3.1LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$342.15Shop/Dealer Price$389.58 - $527.29
1991 Pontiac Trans SportV6-3.1LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$700.33Shop/Dealer Price$840.77 - $1257.92
1995 Pontiac Trans SportV6-3.1LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$264.71Shop/Dealer Price$297.72 - $389.26
1996 Pontiac Trans SportV6-3.4LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$640.03Shop/Dealer Price$765.54 - $1137.57
1993 Pontiac Trans SportV6-3.1LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$543.95Shop/Dealer Price$645.31 - $945.19
1999 Pontiac Trans SportV6-3.4LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$640.03Shop/Dealer Price$765.40 - $1137.32
Show example Pontiac Trans Sport Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Pontiac Trans Sport services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(7)
Rating Summary
7
0
0
0
0
7
0
0
0
0

Russell

25 years of experience
356 reviews
Request Russell
Russell
25 years of experience
Request Russell
by Daniel
Pontiac Trans Sport V6-3.4L - Oil Change - Portland, Oregon
Russell really knows what he's doing. He's the kind of mechanic you wish you had known for years.

Jose

16 years of experience
213 reviews
Request Jose
Jose
16 years of experience
Request Jose
by Warren
Pontiac Trans Sport V6-3.1L - Battery - Marietta, Georgia
Thanks Jose, your help is much appreciate. Good job, great service. What a concept, to obtain a la carte onsite service online. I'd recommend this to anyone. Also, hat tip to O'Reilly Auto Parts for the referral. Nice teamwork!

Maxwell

19 years of experience
390 reviews
Request Maxwell
Maxwell
19 years of experience
Request Maxwell
by Kane
Pontiac Trans Sport V6-3.4L - Serpentine/Drive Belt - Cypress, Texas
Friendly, professional, and efficient. He showed up on time, did the work very swiftly, and helped me plan my next service.

Whitney

40 years of experience
783 reviews
Request Whitney
Whitney
40 years of experience
Request Whitney
by Humberto
Pontiac Trans Sport V6-3.4L - inpsection - San Jose, California

Excellent Rating

(7)
Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Pontiac Trans Sport services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

10 Best Stores to Buy Auto Parts in Tulsa, Oklahoma
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Tulsa is O’Reilly Auto Parts.
Read more
10 Best Automotive Hand Tools
Automotive technician jobs require hand tools for repairing cars. Klutch has a 566 piece hand tool kit that comes with a lifetime guarantee.
Read more
How to Replace a Distributor O-Ring
Distributor O-rings seal the distributor shaft to the intake manifold. O-rings prevent engine misfires, loss of power, and oil leaks.
Read more

ford focus air bag light on all the time

You cannot reset the airbag light unless a scanner that can access the airbag system is used to check and retrieve codes. Once codes are received then a diagnosis can be done. It is recommended that only qualified mechanics test...
Read more

what is the oil pan made out of

Depending on the engine you have and the Lincoln vehicle you have the oil pan is made from stamped steel or cast aluminum. If you need to keep engine from freezing then have a engine block heater installed to be...
Read more

Permanent DTC Code cylinder 4 misfire on Jeep Wrangler

Hi there. The best way to clear any stored error codes in your ECU is to have one of our professional mobile mechanics come to your location and complete a check engine light inspection (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) using a professional digital scanner....
Read more
  1. Home
  2. Estimates
  3. Pontiac
  4. Trans Sport
  5. Control Arm Assembly Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com

Read FAQ
GET A QUOTE