Pontiac Montana Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(105)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(105)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Pontiac Montana Fuel Injector Replacement is $798 with $658 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Pontiac MontanaV6-3.4LService typeFuel Injector ReplacementEstimate$2559.88Shop/Dealer Price$3094.40 - $4673.66
2000 Pontiac MontanaV6-3.4LService typeFuel Injector ReplacementEstimate$2532.85Shop/Dealer Price$3062.07 - $4637.36
2009 Pontiac MontanaV6-3.9LService typeFuel Injector ReplacementEstimate$2786.39Shop/Dealer Price$3372.14 - $5116.02
1999 Pontiac MontanaV6-3.4LService typeFuel Injector ReplacementEstimate$1866.61Shop/Dealer Price$2229.34 - $3305.00
2002 Pontiac MontanaV6-3.4LService typeFuel Injector ReplacementEstimate$2532.85Shop/Dealer Price$3066.56 - $4645.22
2001 Pontiac MontanaV6-3.4LService typeFuel Injector ReplacementEstimate$2532.85Shop/Dealer Price$3062.57 - $4638.22
2008 Pontiac MontanaV6-3.9LService typeFuel Injector ReplacementEstimate$2161.91Shop/Dealer Price$2591.59 - $3867.14
2004 Pontiac MontanaV6-3.4LService typeFuel Injector ReplacementEstimate$2532.85Shop/Dealer Price$3062.14 - $4637.48
Show example Pontiac Montana Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(105)

Rating Summary
101
3
1
0
0
101
3
1
0
0

Michael

17 years of experience
606 reviews
Michael
17 years of experience
Pontiac Montana V6-3.4L - Car is not starting - Marietta, Georgia
called because he was early to see if o.k. to come. Then went to get gas to see if it needed gas. and then he did his best to figure out what it was without trying this and that.

Jerimiah

20 years of experience
328 reviews
Jerimiah
20 years of experience
Pontiac Montana V6-3.4L - Drive Belt Tensioner - Las Vegas, Nevada
so far his been trustworthy and on time.

Russell

28 years of experience
271 reviews
Russell
28 years of experience
Pontiac Montana V6-3.4L - Car is not starting - Orinda, California
Everything went smooth Russell very respectful understood what was wrong with my vehicle knowledgeable mechanic and quick I love this company made my faith come back about mechanics trying to rip you off I feel and have room to breath again I hope this company stays honest as it use to be in the old days from the first day I picked up the phone to call this company it has been nothing but pure pleasure I feel I could trust my mechanic once again Thank You

Collins

13 years of experience
678 reviews
Collins
13 years of experience
Pontiac Montana V6-3.4L - Car Battery Replacement - Marietta, Georgia
very nice, did a quick and great job.

Excellent Rating

(105)

Rating Summary
101
3
1
0
0
101
3
1
0
0
Number of Pontiac Montana services completed
1155+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

How to Handle a Car With Total Brake Failure
Brake Brake failure is terrifying and most motorists consider it to be a worst-case scenario. Here are a few things to keep in mind in case you find yourself in such a situation. Awareness of your surroundings is key. Relax...
B1996 OBD-II Trouble Code: Passenger Side Side-Mount Air Bag Circuit Short to Vbatt
B1996 trouble code means there's a problem with the passenger side side-mount air bag circuit, caused by faulty wiring or connectors or the air bag.
P0465 OBD-II Trouble Code: Purge Flow Sensor Circuit Malfunction
P0465 means the purge flow sensor in the evaporative control system is malfunctioning, usually in conjunction with other failures within the system.

my car is slow to accelerate. i have a p0171 code. i replaced my o2 sensor but the code came back on. what else could it be?

The code P0171 (https://www.yourmechanic.com/article/p0171-obd-ii-trouble-code-system-too-lean-bank-1-by-andrew-quinn) is a lean code indicating the O2 sensor is detecting the engine is running lean – that is, the air/fuel mixture is imbalanced. You may have a clogged fuel filter (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuel-filter) or a fuel pump (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuel-pump)...

Intermittent enginge vibration

You are right on track. Chances are, now that the engine is lacking proper air, fuel, or spark. Issues like this can also be sensor related. The best way to start the testing is to get the vehicle scanned for...

HI the battery is dead have a 2012 jeep grand cherokee and can't get to the battery under the seat as no power also tried jump sta

It is possible that the smoke could have been due to the jumper cables being installed backwards. I would recommend double checking to make sure that you connected the cables properly. If you did connect the cables properly and the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com