Pontiac GTO Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(35)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(35)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Pontiac GTO Fuel Injector Replacement is $1042 with $902 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Pontiac GTOV8-5.7LService typeFuel Injector ReplacementEstimate$3755.10Shop/Dealer Price$4658.73 - $7361.50
2006 Pontiac GTOV8-6.0LService typeFuel Injector ReplacementEstimate$1950.03Shop/Dealer Price$2402.87 - $3757.28
2005 Pontiac GTOV8-6.0LService typeFuel Injector ReplacementEstimate$1950.03Shop/Dealer Price$2402.90 - $3757.32
Show example Pontiac GTO Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(35)

Rating Summary
33
0
1
0
1
33
0
1
0
1

Terry

27 years of experience
326 reviews
Terry
27 years of experience
Pontiac GTO V8-5.7L - Check Engine Light is on - Phoenix, Arizona
I booked an appointment on Your Mechanic to have someone take a look at my Pontiac GTO. I had a MIL (check engine or service engine soon) light come on and the car was acting abnormal. Terry was my mechanic, who was very professional and ready to start the job. He hooked his scan tool to the vehicle and came to the conclusion that the ECM (engine control module) was bad and needed to be replaced. I bought a new computer for the car, took it to the dealer to have it reprogrammed, and now it works like a charm. Thanks Terry for the help.

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Pontiac GTO V8-6.6L - Fuel Pump - Oakland, California

Glenn

20 years of experience
86 reviews
Glenn
20 years of experience
Pontiac GTO V8-5.7L - Strut Assembly Replacement (Front) - College Park, Maryland
Came back out and got my suspension changed. He even had a look at some other issues for me. Great guy and highly recommend!

Hiram

26 years of experience
55 reviews
Hiram
26 years of experience
Pontiac GTO V8-5.7L - Electric Problems - Tomball, Texas
Very professional and knowledgeable. I highly recommend his service.

Excellent Rating

(35)

Rating Summary
33
0
1
0
1
33
0
1
0
1
Number of Pontiac GTO services completed
385+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

P0561 OBD-II Trouble Code: System Voltage Unstable
P0561 means there is an abnormal voltage reading from the battery, charging system, or the starting system often due to a dead battery or alternator.
P0063 OBD-II Trouble Code: HO2S Heater Control Circuit Low (Bank 2 Sensor 3)
P0063 P0063 trouble code definition Trouble code P0062 indicates that the heater element used to heat up an oxygen sensor has malfunctioned. To switch on an oxygen sensor either a power or a ground is supplied to the sensor. A...
Disability Driver Laws and Permits in Missouri
Even Even if you are not a disabled driver, it is important to familiarize yourself with the disabled driver laws in your state. Missouri, as is true of all states, has very specific guidelines for what disabled drivers. How do...

Exhaust sound

The exhaust would need to be inspected to determine the cause of the noise; it could be coming from the muffler, or indicate a problem with piping, or the converter. I recommend that you have a mechanic, such as one...

92 nissan maxima stalling problems

You should first replace the fuel filter and see if this helps condition. If filter does not help then have fuel pressure checked to see if the fuel pump is producing enough pressure and have it replaced if below specifications....

Car temp reading hot but not overheating

Hi Jennifer. One of the most common causes of an engine that runs hotter than normal is due to air bubbles in the cooling system. If repairs were made to the radiator and the replacement coolant was not correctly bled...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com