Pontiac GTO Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(35)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(35)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Pontiac GTO Front Crankshaft Seal Replacement is $371 with $49 for parts and $322 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Pontiac GTOV8-6.0LService typeFront Crankshaft Seal ReplacementEstimate$455.12Shop/Dealer Price$488.06 - $568.23
2004 Pontiac GTOV8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$434.40Shop/Dealer Price$463.27 - $540.40
2005 Pontiac GTOV8-6.0LService typeFront Crankshaft Seal ReplacementEstimate$434.40Shop/Dealer Price$463.33 - $540.50
Show example Pontiac GTO Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(35)

Rating Summary
33
0
1
0
1
33
0
1
0
1

Glenn

20 years of experience
86 reviews
Glenn
20 years of experience
Pontiac GTO V8-5.7L - Strut Assembly Replacement (Front) - College Park, Maryland
Came back out and got my suspension changed. He even had a look at some other issues for me. Great guy and highly recommend!

Jeffrey

28 years of experience
870 reviews
Jeffrey
28 years of experience
Pontiac GTO V8-6.6L - Brake Vacuum Pump - Charlotte, North Carolina
He was on time.Very knowledgeable,Did great work.

John

37 years of experience
565 reviews
John
37 years of experience
Pontiac GTO V8-6.0L - Car is not starting - Sacramento, California
great on time and knowledgeable

Anderson

28 years of experience
94 reviews
Anderson
28 years of experience
Pontiac GTO V8-6.0L - Starter - Flushing, New York
Polite and punctual. Highly recommended.

Excellent Rating

(35)

Rating Summary
33
0
1
0
1
33
0
1
0
1
Number of Pontiac GTO services completed
385+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

P3401 OBD-II Trouble Code: Cylinder 1 Deactivation Intake Valve Control Circuit Open
P3401 P3401 trouble code definition Cylinder 1 Deactivation Intake Valve Control Circuit Open What the P3401 code means P3401 is an OBD-II generic code for the engine control module (ECM) detecting that the intake control solenoid for cylinder number 1...
P2649 OBD-II Trouble Code: ‘A’ Rocker Arm Actuator Control Circuit High Bank 1
P2649 P2649 code definition ‘A’ Rocker Arm Actuator Control Circuit High Bank 1 What the P2649 code mean P2649 is an OBD-II code for the engine control module (ECM) detecting the ‘A’ rocker arm actuator control circuit for bank 1...
P0147 OBD-II Trouble Code: O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 3)
P0147 P0147 code definition O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 3) What the P0147 code means P0147 is the OBD-II generic code indicating the Engine Control Module (ECM) has tested the O2 sensor heater circuit during startup and...

Grinding from rear brakes

Hi there. Sounds to me that your brake pads have worn past their limit causing the metal base to press against the brake rotor which is leading to metal on metal contact. A brake service is due for your car....

The dome and the rear brake lights are not working.

Hi there. It is very rare that these two circuits affect each other. It can be a failure in the SAM module if both of these problems started at the same time, but most of the time they are separate....

ABS Light is on - 2014 Dodge Charger

Your car is equipped with wheel speed sensors at each of the four wheels which monitor wheel speed while relaying this information constantly to the ABS and traction control system, which are controlled by the car's ECU. When the ECU...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com