Pontiac Grand Prix Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(391)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(391)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Pontiac Grand Prix Power Steering Pressure Hose Replacement is $198 with $58 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Pontiac Grand PrixV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$654.54Shop/Dealer Price$709.21 - $848.11
2004 Pontiac Grand PrixV6-3.8L TurboService typePower Steering Pressure Hose ReplacementEstimate$439.82Shop/Dealer Price$494.32 - $651.20
2002 Pontiac Grand PrixV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$628.53Shop/Dealer Price$681.75 - $828.85
2006 Pontiac Grand PrixV8-5.3LService typePower Steering Pressure Hose ReplacementEstimate$370.36Shop/Dealer Price$407.53 - $512.35
1998 Pontiac Grand PrixV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$564.13Shop/Dealer Price$605.66 - $707.78
1993 Pontiac Grand PrixV6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$600.57Shop/Dealer Price$643.76 - $759.41
2001 Pontiac Grand PrixV6-3.8L TurboService typePower Steering Pressure Hose ReplacementEstimate$403.33Shop/Dealer Price$459.15 - $621.13
1998 Pontiac Grand PrixV6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$403.33Shop/Dealer Price$459.13 - $621.09
Show example Pontiac Grand Prix Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(391)

Rating Summary
363
17
2
0
9
363
17
2
0
9

PETE

20 years of experience
26 reviews
PETE
20 years of experience
Grand Prix 2008 - Power steering fluid is leaking - Claymont, DE
Helped me out alot

Salvador

19 years of experience
14 reviews
Salvador
19 years of experience
Grand Prix 1999 - Crankshaft Harmonic Balancer - Hagerstown, MD
Second job,of Salvador,and again outstanding as always,I can say with ease,I've found my Mechanic.He can do all my repairs,anytime,Thanks Salvador.

Daniel

8 years of experience
37 reviews
Daniel
8 years of experience
Grand Prix 2003 - Brakes, Steering and Suspension Inspection - Las Vegas, NV
Did a great job solved the issue!

Michael

25 years of experience
138 reviews
Michael
25 years of experience
Grand Prix 2002 - Ignition Coil - Indianapolis, IN
Michael is the best. Always timely and when he is running late he is in contact which is extremely considerate. Takes pride in his work and always makes sure it is done correctly. I specifically request him and trust him to work on our cars.

Excellent Rating

(391)

Rating Summary
363
17
2
0
9
363
17
2
0
9
Number of Pontiac Grand Prix services completed
4301+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

P2315 OBD-II Trouble Code: Ignition Coil F Primary Control Circuit Low
P2315 P2315 code definition The P2315 diagnostic trouble code is an indication that there is a problem with the ignition coil F primary control circuit. Related Trouble Codes: P2300 OBD-II Trouble Code: Ignition Coil A Primary Control Circuit Low P2301...
The Guide to Legal Car Modifications in South Carolina
ARENA Creative / Shutterstock.com Those who live in South Carolina and those who are planning to do so need to understand the laws throughout the state. If you have a modified car or truck, the following laws...
How to Unlock a Chevrolet Theftlock Radio
Theftlock Theftlock is a theft prevention system designed into GM-brand radios starting in the mid-1990’s. This system is designed to lock the radio from use in the event of a loss of power, either from being disconnected or when the...

Steering wheel shakes when applying brakes

The rotors and pads should be replaced as a set. If not, then you will not have even wear and diminished brake stopping power until the two components are seated to one another. Sometimes cutting a rotor will not fix...

Why are my wipers, horn and radio not working. 2015 Nissan Altima

Hello. I would need to know if all of these went out at the same time. I also need to know if anything led up to this occurring. Most of the time when this many circuit fail at one time...

1992 GMC vandura mini bus 6.2 l 3500 diesel [engine](/topics-engine-gmc/) the transmission it won't shift out of first gear I have replaced both transmission solenoids I've checked the wiring I've replace the filter and I've also changed the TCM any guesses on what's wrong

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com