Pontiac Grand Am Car starts and then dies Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(320)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(320)

Car starts and then dies Inspection Service

How much does a Car starts and then dies Inspection cost?

On average, the cost for a Pontiac Grand Am Car starts and then dies Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Pontiac Grand AmL4-2.2LService typeCar starts and then dies InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1994 Pontiac Grand AmL4-2.3LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2001 Pontiac Grand AmV6-3.4LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2000 Pontiac Grand AmL4-2.4LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1998 Pontiac Grand AmV6-3.1LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1990 Pontiac Grand AmL4-2.3LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1974 Pontiac Grand AmV8-6.6LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1991 Pontiac Grand AmL4-2.3LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Pontiac Grand Am Car starts and then dies Inspection prices

Starting a vehicle only to have it quit immediately after can be confusing and annoying for many drivers especially if their vehicle has not experienced this type of issue before. Typically, a vehicle will start and then quit because of an issue with the fuel or electrical system. It is important to monitor fuel levels as well as warning lights which can signal to the driver that a vehicle may quit unexpectedly.

How this system works:

To start a vehicle, the electrical system, composed of the battery and starter, turns the engine over. Once running, the engine requires a constant flow of gasoline and good spark to keep that fuel igniting. If gasoline is not readily available, or if there is not enough spark, the engine will quit. More modern vehicles with sophisticated computers may affect the way the vehicle runs. These computers help the car run efficiently but can also shut a car down if the fuel/air mixture is not correct. While an older vehicle may be less sophisticated and easier to diagnose, the computers on modern cars can provide more specific information when connected to a code scanner/reader.

Common reasons for this to happen:

  • Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so that the right amount of fuel can be delivered from the fuel injectors. When a sensor begins to fail, the vehicle’s computer may generate an error code to indicate that something has gone wrong. An issue with the mass airflow sensor may manifest itself when a car starts and then stalls soon after starting.

  • Fuel Pump Relay: The fuel pump relay functions much like a fuse for an electric fuel pump. The fuel pump relay engages as the vehicle is started and starts the fuel pump. While the vehicle is running, the fuel pump relay turns off and the fuel pump is powered by the oil pressure sending unit. If the vehicle’s computer is unable to keep the fuel pump relay running throughout the starting process, the vehicle may start and quit immediately after starting.

  • Ignition Coil: Your vehicle’s ignition coil takes the low voltage of the battery and provides the thousands of volts needed to create a spark in the spark plugs. When an ignition coil begins to fail, it may struggle to provide consistent spark to the plugs, causing the engine to stall after starting.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why the vehicle starts and then dies. The mechanic will then provide a detailed inspection report outlining why the vehicle quit and the cost of any repairs that need to be made.

How it's done:

A mechanic will begin diagnosing your vehicle’s issue by plugging a code reader/scanner into the vehicle’s computer. The mechanic should be able to get more information from your vehicle’s computer on what component has failed. Using this information, the mechanic can begin necessary repairs.

If your vehicle has a bad or failing mass airflow sensor, the mechanic will begin by finding the sensor in the engine bay and checking for any signs of failure. The mechanic should check the wire harness connected to the sensor to ensure that all of wires are properly connected. After removing the sensor, the mechanic should be able to discover the nature of the failure and replace the sensor.

If the mechanic suspects an issue with the fuel pump relay, he or she should check the vehicle’s computer for a problem. If the vehicle’s computer is having difficulty providing consistent power to the fuel pump relay, the computer may need to be reprogrammed or replaced. If the vehicle’s computer is functioning normally, the mechanic may need to replace the fuel pump relay.

If the mechanic suspects that the ignition coil may be faulty, he or she should first disconnect the battery before beginning work. The mechanic should then begin the process of disconnecting wires from the ignition coil and removing it from the engine bay. The mechanic will then install the new ignition coil and ensure that it is connected properly. The mechanic should then reconnect the battery and test the new coil.

With all repairs, the mechanic will ensure the newly installed parts work properly. The mechanic can then turn off and warning lights that may have come on while the vehicle was not running properly.

How important is this service?

If your vehicle is starting but dying soon after starting, you should have it checked out by a mechanic. Issues involving the fuel management and electrical systems will become worse if not dealt with. Diligence and paying attention to warning lights may help prevent further damage to critical engine component and may save money in repairs. A vehicle that quits after starting can be inconvenient and having a mobile mechanic inspect and repair you vehicle will ensure that you and your vehicle are back on the road soon.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(320)

Rating Summary
294
13
2
5
6
294
13
2
5
6

Brikk

18 years of experience
389 reviews
Brikk
18 years of experience
Pontiac Grand Am V6-3.4L - Car starts and then dies - Charlotte, North Carolina
Brikk was very pleasant and professional. I explained what I thought was wrong with the car and he ran test did the inspection and verify what I thought was wrong. I was very pleased with the service and I would recommend your company to my friends.

Paul

25 years of experience
271 reviews
Paul
25 years of experience
Pontiac Grand Am V6-3.1L - Car starts and then dies - North Las Vegas, Nevada
Did a great job. Really knows his business and is fair on his pricing. HIghly recommend him and will use him again. He quickly assessed the problem and corrected the situation so that we could use our vehicle the same evening.

Neal

12 years of experience
20 reviews
Neal
12 years of experience
Pontiac Grand Am L4-2.4L - Brake Light Switch Replacement - Tampa, Florida
Neal arrived on time and got to work right away. My car needed a couple of bulbs and he went to the store and got them. My brake lights were fixed and a recommendation was given for another part that I may need in the future. This was the best service I have received from any mechanic and would highly recommend him to others. Even though this was a fairly easy job to replace a brake light switch I needed someone who knew what he was doing and the price I could have paid at a dealer was more than 3 times as much.

Shaun

10 years of experience
542 reviews
Shaun
10 years of experience
Pontiac Grand Am V6-3.4L - Steering wheel feels loose - Glendale, Arizona
Great

Excellent Rating

(320)

Rating Summary
294
13
2
5
6
294
13
2
5
6
Number of Pontiac Grand Am services completed
3520+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

How Often Should Brakes Be Replaced?
Brake pads and brake rotors wear out over time. How long brakes last depends on the brake material, as well as your driving patterns.
P0386 OBD-II Trouble Code: Crankshaft Position Sensor B Circuit Range Performance
P0386 means the crankshaft position sensor has produced excessive voltage that exceeds the manufacturer's specifications.
How Much Does a Mechanic Make in Tennessee?
Automotive technician jobs in Tennessee have an mean mechanic salary of $39k, with some mechanics earning as much as $65k.

How do I use the windshield washer?

The windshield washer provides extra visibility by spraying the windshield with a soapy mixture, and then washing it away. To use the washer, pull the wiper lever (on the right side of the steering column) towards you, and hold it...

Will the check engine light cut off automatic

In some rare instances your check engine light may disappear by unhooking the battery, however this is not recommended since doing this may be avoiding a potentially more serious problem temporarily by clearing the code this way. If there is...

Heater is not working. Replaced thermostat. Both hoses at firewall are cold. Maybe replace core? 2000 Ford F-250 5.4L

Hi - most likely, either the heater control valve (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-heater-control-valve) is not functioning properly, or the heater core itself is clogged enough to restrict flow. I would recommend a heater inspection (https://www.yourmechanic.com/services/heater-is-not-working-inspection) by a mobile, professional mechanic, such as one...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com