Pontiac G3 Brake Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Brake Hose Replacement Service

How much does a Brake Hose Replacement cost?

On average, the cost for a Pontiac G3 Brake Hose Replacement is $191 with $48 for parts and $142 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Pontiac G3L4-1.6LService typeBrake Hose - Passenger Side Rear ReplacementEstimate$325.30Shop/Dealer Price$376.64 - $494.63
2010 Pontiac G3L4-1.6LService typeBrake Hose - Driver Side Front ReplacementEstimate$283.81Shop/Dealer Price$334.16 - $451.43
2009 Pontiac G3L4-1.6LService typeBrake Hose - Passenger Side Front ReplacementEstimate$238.55Shop/Dealer Price$277.59 - $360.90
2009 Pontiac G3L4-1.6LService typeBrake Hose - Driver Side Rear ReplacementEstimate$248.04Shop/Dealer Price$288.05 - $372.09
2010 Pontiac G3L4-1.6LService typeBrake Hose - Driver Side Rear ReplacementEstimate$293.30Shop/Dealer Price$344.69 - $462.72
2010 Pontiac G3L4-1.6LService typeBrake Hose - Passenger Side Front ReplacementEstimate$283.81Shop/Dealer Price$334.16 - $451.42
2009 Pontiac G3L4-1.6LService typeBrake Hose - Passenger Side Rear ReplacementEstimate$256.04Shop/Dealer Price$295.87 - $379.77
2009 Pontiac G3L4-1.6LService typeBrake Hose - Driver Side Front ReplacementEstimate$246.05Shop/Dealer Price$285.44 - $369.02
Show example Pontiac G3 Brake Hose Replacement prices

What is the brake hose and how does it work?

The hydraulic steel brake lines that carry brake fluid in your car are bolted to the frame of the vehicle. These metal brake lines must eventually attach to the individual wheel calipers — or wheel cylinders in the case of drum brakes — at all four wheels. Since the wheels constantly move up and down, or left and right in the case of the front wheels, the brake line that attaches to the individual wheel calipers must be highly flexible. Enter the brake hose: a flexible, synthetic, reinforced-rubber hose designed to withstand the 1,000 PSI plus pressures that occur when you apply the brakes. There is at least one brake hose at each wheel position, and sometimes two depending on the suspension design. At the end of each rubber hose are steel connections with seals to maintain a leak-proof connection.

Brake Hoses

When to consider replacing the brake hose:

  • Physical damage. If there are cuts, cracks, abrasions, bulging, or excessive rust at the hose fitting ends, the hose should be replaced.
  • Leaks. Seepage at hose fittings, or leaks anywhere along the hose, requires replacement. If there is a leak, or the hose is bulging, you may notice that the brake pedal is lower than usual or spongy.
  • Internal hose failure. Occasionally, the lining on the interior of the hose can separate, blocking the flow of hydraulic fluid. This is diagnosed using test gauges. A fluid blockage that prevents the brakes from releasing may manifest itself as dragging brakes or overheated brakes.
  • End of Lifetime. Although many brake hoses can last 20 plus years if well-made out of quality materials, after 10 years of service it is best to replace the hoses with new ones for maximum reliability and safety.

How do mechanics replace the brake hose?

  • The vehicle is jacked up and safely supported with steel jack stands.
  • The wheel and tire assembly are removed.
  • A pan is put in place to catch brake fluid.
  • Residual pressure in the brake line is relieved by momentarily opening the brake caliper bleeder screw.
  • Each hose end is detached. At the caliper, the attachment is often a banjo style bolt with one-time-use copper washers. The attachment at the vehicle frame is typically a flare connection, so a tube nut must be loosened. Once both ends are detached, the hose is removed.
  • The new hose is installed using new copper-sealing washers and the factory OEM torque on the tube nut and the banjo bolt.
  • Finally, the brake system is bled to remove all air and the vehicle is road tested. A final check for leaks is performed after the road test.

Is it safe to drive with a brake hose problem?

No. Properly working brakes are always essential. If you suspect damage to the brake hoses or see leaks it is a good idea to have a professional evaluate your car’s brakes.

When replacing a brake hose keep in mind:

  • If a brake hose is replaced due to aging, the mechanic will check all of the other brake hoses as they may be worn or defective as well.
  • Some vehicles have flexible, braided stainless steel brake hoses, or other specially designed hoses. If your car does not have ordinary synthetic rubber hoses, a mechanic will let you know what type of new brake hose you have and what your replacement options are.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Pontiac G3 services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

The Traveler’s Guide to Driving in Costa Rica
Costa Costa Rica is one of the most beautiful countries in the world, especially for those who love the beach, and those who want to get back to nature. You can take a trip up the Arenal Volcano, visit the...
P2231 OBD-II Trouble Code: O2 Sensor Signal Circuit Shorted to Heater Circuit Bank 1 Sensor 1
P2231 P2231 code definition O2 Sensor Signal Circuit Shorted to Heater Circuit Bank 1 Sensor 1 What the P2231 code means P2231 is an OBD-II generic code for the engine control module (ECM) detecting the O2 sensor signal is shorted...
P008C OBD-II Trouble Code: Fuel Cooler Pump Control Circuit/Open
P008C means there is an open circuit problem with the fuel cooler system, likely due to a faulty pump or wiring.

My car has a problem with wheel vibration (while braking)

It does sound like your rotors are warped. The rotors would have to be measured to determine if they can be resurfaced, or if the rotors need to be replaced (https://www.yourmechanic.com/services/brake-rotor-disc-replacement). You don't need to upgrade to aftermarket slotted and...

How much do you charge for a water pump and clutch fan

Hello, thank you for writing in. The water pump is a very common place to develop leaks. Leaks in that area are a good indication. You can check the hoses and their connections to make sure they are secure and...

Trans is making a loud clunk when I put it in drive

If there are faulty motor mounts (https://www.yourmechanic.com/services/engine-mount-replacement) those should be repaired. Once that repair is made, if the noise persists, a noise of that "type" is often due to faulty axle joints. In your circumstance, though, inasmuch as work was...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com