Oldsmobile Silhouette Car starts and then dies Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(43)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(43)

Car starts and then dies Inspection Service

How much does a Car starts and then dies Inspection cost?

On average, the cost for a Oldsmobile Silhouette Car starts and then dies Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Oldsmobile SilhouetteV6-3.4LService typeCar starts and then dies InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2002 Oldsmobile SilhouetteV6-3.4LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1993 Oldsmobile SilhouetteV6-3.8LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1991 Oldsmobile SilhouetteV6-3.1LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2003 Oldsmobile SilhouetteV6-3.4LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1993 Oldsmobile SilhouetteV6-3.1LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1992 Oldsmobile SilhouetteV6-3.1LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1994 Oldsmobile SilhouetteV6-3.8LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Oldsmobile Silhouette Car starts and then dies Inspection prices

Starting a vehicle only to have it quit immediately after can be confusing and annoying for many drivers especially if their vehicle has not experienced this type of issue before. Typically, a vehicle will start and then quit because of an issue with the fuel or electrical system. It is important to monitor fuel levels as well as warning lights which can signal to the driver that a vehicle may quit unexpectedly.

How this system works:

To start a vehicle, the electrical system, composed of the battery and starter, turns the engine over. Once running, the engine requires a constant flow of gasoline and good spark to keep that fuel igniting. If gasoline is not readily available, or if there is not enough spark, the engine will quit. More modern vehicles with sophisticated computers may affect the way the vehicle runs. These computers help the car run efficiently but can also shut a car down if the fuel/air mixture is not correct. While an older vehicle may be less sophisticated and easier to diagnose, the computers on modern cars can provide more specific information when connected to a code scanner/reader.

Common reasons for this to happen:

  • Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so that the right amount of fuel can be delivered from the fuel injectors. When a sensor begins to fail, the vehicle’s computer may generate an error code to indicate that something has gone wrong. An issue with the mass airflow sensor may manifest itself when a car starts and then stalls soon after starting.

  • Fuel Pump Relay: The fuel pump relay functions much like a fuse for an electric fuel pump. The fuel pump relay engages as the vehicle is started and starts the fuel pump. While the vehicle is running, the fuel pump relay turns off and the fuel pump is powered by the oil pressure sending unit. If the vehicle’s computer is unable to keep the fuel pump relay running throughout the starting process, the vehicle may start and quit immediately after starting.

  • Ignition Coil: Your vehicle’s ignition coil takes the low voltage of the battery and provides the thousands of volts needed to create a spark in the spark plugs. When an ignition coil begins to fail, it may struggle to provide consistent spark to the plugs, causing the engine to stall after starting.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why the vehicle starts and then dies. The mechanic will then provide a detailed inspection report outlining why the vehicle quit and the cost of any repairs that need to be made.

How it's done:

A mechanic will begin diagnosing your vehicle’s issue by plugging a code reader/scanner into the vehicle’s computer. The mechanic should be able to get more information from your vehicle’s computer on what component has failed. Using this information, the mechanic can begin necessary repairs.

If your vehicle has a bad or failing mass airflow sensor, the mechanic will begin by finding the sensor in the engine bay and checking for any signs of failure. The mechanic should check the wire harness connected to the sensor to ensure that all of wires are properly connected. After removing the sensor, the mechanic should be able to discover the nature of the failure and replace the sensor.

If the mechanic suspects an issue with the fuel pump relay, he or she should check the vehicle’s computer for a problem. If the vehicle’s computer is having difficulty providing consistent power to the fuel pump relay, the computer may need to be reprogrammed or replaced. If the vehicle’s computer is functioning normally, the mechanic may need to replace the fuel pump relay.

If the mechanic suspects that the ignition coil may be faulty, he or she should first disconnect the battery before beginning work. The mechanic should then begin the process of disconnecting wires from the ignition coil and removing it from the engine bay. The mechanic will then install the new ignition coil and ensure that it is connected properly. The mechanic should then reconnect the battery and test the new coil.

With all repairs, the mechanic will ensure the newly installed parts work properly. The mechanic can then turn off and warning lights that may have come on while the vehicle was not running properly.

How important is this service?

If your vehicle is starting but dying soon after starting, you should have it checked out by a mechanic. Issues involving the fuel management and electrical systems will become worse if not dealt with. Diligence and paying attention to warning lights may help prevent further damage to critical engine component and may save money in repairs. A vehicle that quits after starting can be inconvenient and having a mobile mechanic inspect and repair you vehicle will ensure that you and your vehicle are back on the road soon.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(43)

Rating Summary
39
2
1
0
1
39
2
1
0
1

Larry

16 years of experience
126 reviews
Larry
16 years of experience
Oldsmobile Silhouette V6-3.4L - Car Battery Replacement - Columbus, Ohio
Great job!

Bryant

12 years of experience
617 reviews
Bryant
12 years of experience
Oldsmobile Silhouette V6-3.4L - Clunking or knocking noise from wheels - Indianapolis, Indiana
Very nice and upfront. One can tell the experience he has just by talking to him. I would highly recommend Bryant.

David

25 years of experience
180 reviews
David
25 years of experience
Oldsmobile Silhouette V6-3.4L - Car is not starting - Ocala, Florida
Very sweet and listened u don't get that alot .

Wilson

13 years of experience
296 reviews
Wilson
13 years of experience
Oldsmobile Silhouette V6-3.4L - Serpentine/Drive Belt - Orlando, Florida
Wilson was very professional and punctual. He also doesn't replace parts that doesn't need replacing which cut the bill in half! Awesome work Wilson.

Excellent Rating

(43)

Rating Summary
39
2
1
0
1
39
2
1
0
1
Number of Oldsmobile Silhouette services completed
473+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

P2010 OBD-II Trouble Code: Intake Manifold Runner Control Circuit High Bank 1
P2010 P2010 trouble code definition P2010 is a generic OBD2 trouble code that indicates a fault within the intake manifold runner control circuit. This code is similar to P2005, P2006, P2007, P2008, P2009, P2013 and P2015. What the P2010 code...
What are the Car Pool Rules in Missouri?
Car Car pool lanes have existed for decades, and are becoming more and more common. There are more than 3,000 miles of car pool lanes across the nation, which helps the commute of thousands of drivers every single day. A...
P2729 OBD-II Trouble Code: Pressure Control Solenoid E Control Circuit Low
P2729 means a solenoid has malfunctioned due to a failing transmission, faulty sensors or solenoids, low fluid levels or electrical issues

Timing chain problem should I replace the motor because of the mileage

Hello. I would go with the option that makes the most sense in terms of cost efficiency. In some cases replacing the engine entirely is actually less expensive then rebuilding or servicing a major component. The 4.0 V6 that your...

Car ignition switch - 2011 Malibu Chevrolet

This could be caused by a wide variety of possibilities. Without additional detail of the symptoms, this may be tough to diagnose here. You'll need to find out if the car is cranking at all or if there is any...

Reverse lights don't always work 1994 Mazda MX6

Hi - most likely the reverse light switch (https://www.yourmechanic.com/article/how-long-does-a-backup-light-switch-last) is working erratically. It is mounted on the gearbox, and is subject to vibration as well as oil on the switch contacts. I recommend a reverse light switch replacement (https://www.yourmechanic.com/services/backup-light-switch-replacement) by...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com