Oldsmobile Alero Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Oldsmobile Alero Wheel Bearings Replacement is $304 with $164 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Oldsmobile AleroL4-2.2LService typeWheel Bearings - Driver Side Front ReplacementEstimate$483.38Shop/Dealer Price$569.08 - $818.06
2000 Oldsmobile AleroV6-3.4LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$474.37Shop/Dealer Price$558.30 - $805.96
2003 Oldsmobile AleroL4-2.2LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$570.65Shop/Dealer Price$678.67 - $998.56
2003 Oldsmobile AleroL4-2.2LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$570.65Shop/Dealer Price$678.67 - $998.56
2000 Oldsmobile AleroL4-2.4LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$474.37Shop/Dealer Price$559.80 - $808.58
2000 Oldsmobile AleroL4-2.4LService typeWheel Bearings - Driver Side Front ReplacementEstimate$474.37Shop/Dealer Price$558.46 - $806.25
2002 Oldsmobile AleroL4-2.2LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$570.65Shop/Dealer Price$678.69 - $998.59
2000 Oldsmobile AleroL4-2.4LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$570.65Shop/Dealer Price$678.67 - $998.56
Show example Oldsmobile Alero Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Diana

17 years of experience
37 reviews
Diana
17 years of experience
Alero 2002 - Wheel Bearings - Hoboken, NJ
The experience was great. Diana replaced the wheel bearing and let me know of any other issues the car had.

Caz

13 years of experience
86 reviews
Caz
13 years of experience
Alero 2002 - Wheel Bearings - Avondale Estates, GA
Caz was very knowledgeable

Travis

10 years of experience
549 reviews
Travis
10 years of experience
Alero 2000 - Check Engine Light is on - Minneapolis, MN
Great experience! Travis a cool and very knowledgeable. He's got special tools to EXTRA check under the hood and we found more important things to fix without being oversold on a bunch of nonsense. I learned a lot about my car and look forward to future repairs with him.

Andrew

12 years of experience
83 reviews
Andrew
12 years of experience
Alero 2001 - Car is not starting - Federal Way, WA
Fast friendly.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Oldsmobile Alero Wheel Bearings Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

P3408 OBD-II Trouble Code: Cylinder 1 Deactivation/Exhaust Valve Malfunction
P3408 P3408 code definition P3408 is the fault code for Cyl1 Exhaust Valve Ctrl Circ High. Cyl1 specifies that the issue is likely taking place in engine cylinder number 1. What the P3408 code means Late model vehicles with eight...
Industry News for Automotive Techs: September 17-23
Michigan is sued over dealer licenses, new self-driving car policies, introduction to ADAS diagnosis, and Tesla safety concerns are the top stories.
Disabled Driver Laws and Permits in South Carolina
In In South Carolina, people who have disabilities are entitled to certain privileges when it comes to parking. These privileges override those of other motorists, and are mandated by law. Summary of South Carolina disabled driver laws In South Carolina,...

What is proper reading on wires inside distributor?

11.88 is low for an automotive battery. A reading within .2 volts of the battery can be expected. It may just be running out of juice from cranking and will need to be charged fully before it is put to...

I have a,2004 Cadillac CTS,. there is a whining noise coming from the rear tire passenger side- what could it be ?

Hello, thank you for writing in. When it comes to potential brake issues, you want to have it looked at as soon as possible. The brake system is THE most important safety feature on the vehicle. If you have leaking...

coolant low in my van

The coolant level is checked by looking at the plastic reservoir (overflow) tank. You should see a min. (minimum) and max. (maximum) levels marked on the reservoir. When the vehicle is stone cold, the level of coolant in the tank...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com