Oldsmobile Achieva Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Oldsmobile Achieva Wheel Bearings Replacement is $276 with $136 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Oldsmobile AchievaV6-3.1LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$426.96Shop/Dealer Price$498.55 - $705.22
1993 Oldsmobile AchievaV6-3.3LService typeWheel Bearings - Driver Side Front ReplacementEstimate$426.37Shop/Dealer Price$498.30 - $709.96
1995 Oldsmobile AchievaV6-3.1LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$426.37Shop/Dealer Price$498.32 - $710.00
1997 Oldsmobile AchievaL4-2.4LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$417.95Shop/Dealer Price$487.80 - $693.16
1998 Oldsmobile AchievaL4-2.4LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$417.95Shop/Dealer Price$489.27 - $695.74
1995 Oldsmobile AchievaL4-2.3LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$426.37Shop/Dealer Price$498.46 - $710.25
1998 Oldsmobile AchievaL4-2.4LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$426.37Shop/Dealer Price$498.34 - $710.03
1995 Oldsmobile AchievaL4-2.3LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$417.95Shop/Dealer Price$487.80 - $693.16
Show example Oldsmobile Achieva Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(6)

Rating Summary
4
0
1
0
1
4
0
1
0
1

Kenneth

21 years of experience
870 reviews
Kenneth
21 years of experience
Oldsmobile Achieva V6-3.1L - Car is not starting - Los Angeles, California
Inspected car for starting problems but could not check engine light on

Ryan

19 years of experience
62 reviews
Ryan
19 years of experience
Oldsmobile Achieva L4-2.4L - Car is not starting - Ogden, Utah
Seemed to definitely know what he was talking about. Was right on time. Really friendly.

Manuel

42 years of experience
132 reviews
Manuel
42 years of experience
Oldsmobile Achieva L4-2.4L - Inspection / Diagnostics - San Antonio, Texas
I never called for a mobile mechanic before until I found this website, was rather skeptical at first but because my car couldn't drive at all I became desperate. My mechanic Manuel arrived a bit early unexpectedly, which is good, and he knew the problem with no hassel along with the recommended parts I would need to fix my car. Because of him I can fully trust in YourMechanic.com to find out what is wrong with my car and knowing how to fix it at a fair price, and never feel uncomfortable with their mechanics ever again.

Tyrone

20 years of experience
105 reviews
Tyrone
20 years of experience
Oldsmobile Achieva L4-2.4L - Oil Change - Houston, Texas
It was a highly enjoysble experience with a young man who is personable, a gigted mechanic, and a true professional!!!

Excellent Rating

(6)

Rating Summary
4
0
1
0
1
4
0
1
0
1
Number of Oldsmobile Achieva services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

Top 10 Scenic Drives in Maine
In the furthest north portion of New England, Maine is almost like a world unto itself. Its residents have such a unique accent and friendly manner that it seems almost foreign to the uninitiated, and there are so many natural...
What are the Car Pool Rules in Kentucky?
Every Every day, a large number of Kentucky drivers rely on the state’s freeways to get them to work, school, the grocery store, and many other places. And many of these drivers utilize Kentucky’s car pool lanes, which can be...
How to Apply Rain-X to Your Windshield
Apply Rain-X to your car windshield so you can drive in the rain for better visibility and to drive more safely in the rain.

Code P300. Tried fixing with no success.

When you receive the OBD code P0300, it means your Buick LeSabre is experiencing a random misfire. This code is given because one or more of the engine’s cylinders are misfiring. While our first instinct is to think spark plugs,...

How do I add washer fluid?

If you attempt to wash your windshields with the wiper washers, and no fluid comes out, then you will need to add more washer fluid. To do so, open the hood, and locate the washer fluid reservoir. Open the lid,...

Hello, we cannot start it

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com