Nissan Z Parking brake is stuck Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(12,593)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(12,593)

Parking brake is stuck Inspection Service

How much does a Parking brake is stuck Inspection cost?

On average, the cost for a Nissan Z Parking brake is stuck Inspection is $140 with $0 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2023 Nissan ZV6-3.0L TurboService typeParking brake is stuck InspectionEstimate$155.00Shop/Dealer Price$158.60 - $161.30
2024 Nissan ZV6-3.0L TurboService typeParking brake is stuck InspectionEstimate$145.99Shop/Dealer Price$147.82 - $149.20
Show example Nissan Z Parking brake is stuck Inspection prices

Your parking brake is a valuable component that helps ensure better safety when parked on an incline, and also helps reduce unnecessary loading of the transmission. If you’ve ever parked on a hill and not used the parking brake, you’re familiar with the loud “thunk” and lurch that happens when you crank the car and put it in drive when you’re ready to leave. Engaging the parking brake avoids this, and enhances safety. However, if your parking brake is stuck, the light in your dash will stay on, and you may damage the brake shoes while driving.

How this system works:

Your parking brake is actually very little more than a lever attached to a cable. When you pull the parking brake handle in the cabin, it engages a cable. That cable runs from the parking brake handle under the car and to the back wheels. Pulling up on the handle pulls the cable taut, which engages the parking brake.

The brake itself is nothing more than a pair of small brake shoes mounted inside the drum built into the rear rotors of your car. The shoes press outward on the drum, holding the wheel in place (it’s not as strong as your normal brakes, and generally cannot hold the car by itself on anything more than a very gentle incline).

When you put the parking brake handle down, the cable disengages the parking brake and the shoes retract from against the walls of the drum. This releases the vehicle, allowing you to drive without damaging the parking brake.

Common reasons for this to happen:

  • Rust and Corrosion: One of the most common problems with parking brakes is corrosion on the cable that leads to the rear brakes. Once the cable begins to rust, it can stick. When this happens, you won’t be able to release the parking brake.

  • Engaged Too Hard: While uncommon, it is possible for the parking brake to stick if you applied it to hard. If you crank back on the handle as hard as possible, you’re overdoing it, and it’s possible for the cable to stretch, the shoes to stick and more.

  • Damaged/Stuck Adjuster Screw: The rear brake shoes are operated by an adjuster screw. If the screw is stuck, corroded or damaged, it will not move and your parking brake will not disengage.

  • Leaving It Engaged for Too Long: Most of us use our parking brake on a relatively limited basis, leaving it engaged overnight at the longest. In some situations, leaving it engaged for a long period (say over the winter in storage) can cause the assembly to freeze and stick.

What to expect:

Our professional mobile mechanic will come to your home or office to inspect the parking brake handle, cable, lever, adjusting screw, shoes and other components in the system. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect all aspects of the parking brake, from the handle to the cable, all the way back to the lever, the spring, the adjusting screw and the shoes. It may be necessary to remove one or both rear wheels. It may also be necessary to disassemble the rear brakes to reach the parking brake components.

How important is this service?

If your parking brake is stuck, you cannot drive the car without causing further damage. It’s highly advised to leave your car parked where it is if you notice that the Parking Brake light stays on after lowering the handle, or feeling resistance when trying to drive (or smelling burned brake material after driving). One of our professional mechanics will be able to diagnose the problem and restore functionality to your parking brake.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(12,593)

Rating Summary
11,809
407
90
60
227
11,809
407
90
60
227

Joseph

28 years of experience
578 reviews
Joseph
28 years of experience
Nissan 300ZX V6-3.0L - Parking brake is stuck - Houston, Texas
Got the job done quick.

Greg

23 years of experience
624 reviews
Greg
23 years of experience
Nissan Sentra L4-1.8L - Check Engine Light is on - Mesa, Arizona
Greg had to fix a sloppy job from this service

Tyrone

20 years of experience
105 reviews
Tyrone
20 years of experience
Nissan Xterra V6-4.0L - AC is not working - Houston, Texas

Allen

37 years of experience
471 reviews
Allen
37 years of experience
Nissan Altima L4-2.4L - Car is not starting - Orlando, Florida
He's a very experienced mechanic and he was very helpful resolving the issues with my car. Thanks.

Excellent Rating

(12,593)

Rating Summary
11,809
407
90
60
227
11,809
407
90
60
227
Number of Nissan services completed
138523+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in Louisiana
Right-of-way Right-of-way laws serve to ensure that traffic moves smoothly and safely. You have an obligation to obey the laws, but you do not, by definition, have the right of way. Right of way is never owned – it is...
How to Prepare for the Missouri Driver’s Written Test
Before Before you can drive in the state of Missouri, you need to have your license, naturally. Before you can get your license though, you need to have your learner’s permit, and that means you need to pass the state’s...
How to Replace a License Plate Bulb
The license plate lamps are designed to illuminate the plate and registration tags on your vehicle and make it easily visible to...

When doing a radiator flush - do you need to replace the thermostat or any other components of the cooling system

Doing a radiator flush does not require any other component to be replaced. However, if the system has a lot of debris and scale in it, the thermostat (https://www.yourmechanic.com/services/thermostat-replacement) may need to be replaced if it gets clogged or corroded....

Car is shaking at 60 MPH 60

Control arms and control arm bushings are a very common failure on your car. If there is even a slight imbalance in the tires and wheels, the effect will be greatly amplified by any looseness in the front suspension.The control...

03 Honda Accord EX which starts, shakes, then dies, yet when restarted cranks up just fine and runs. Ideas??

My first guess is that you may have a leaking fuel injector. When an injector is leaking from the tip, there is no visible sign. When you shut off the engine, the tip of the injector will drip into the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com