Nissan Rogue Sport Wheel Stud Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Wheel Stud Replacement Service

How much does a Wheel Stud Replacement cost?

On average, the cost for a Nissan Rogue Sport Wheel Stud Replacement is $139 with $44 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Nissan Rogue SportL4-2.0LService typeWheel Stud - Passenger Side Rear ReplacementEstimate$202.89Shop/Dealer Price$234.87 - $308.29
2018 Nissan Rogue SportL4-2.0LService typeWheel Stud - Passenger Side Rear ReplacementEstimate$182.89Shop/Dealer Price$214.88 - $288.32
2018 Nissan Rogue SportL4-2.0LService typeWheel Stud - Driver Side Front ReplacementEstimate$182.89Shop/Dealer Price$214.88 - $288.32
2017 Nissan Rogue SportL4-2.0LService typeWheel Stud - Driver Side Rear ReplacementEstimate$182.89Shop/Dealer Price$214.86 - $288.28
2018 Nissan Rogue SportL4-2.0LService typeWheel Stud - Driver Side Rear ReplacementEstimate$182.89Shop/Dealer Price$214.90 - $288.35
2018 Nissan Rogue SportL4-2.0LService typeWheel Stud - Passenger Side Front ReplacementEstimate$182.89Shop/Dealer Price$214.88 - $288.32
2017 Nissan Rogue SportL4-2.0LService typeWheel Stud - Passenger Side Front ReplacementEstimate$187.89Shop/Dealer Price$219.75 - $293.08
2017 Nissan Rogue SportL4-2.0LService typeWheel Stud - Driver Side Front ReplacementEstimate$187.89Shop/Dealer Price$220.12 - $293.74
Show example Nissan Rogue Sport Wheel Stud Replacement prices

What are wheel studs and how do they work?

Wheel studs are high-strength, threaded steel fasteners that securely hold the wheel and tire assembly to the axle hub. Typically, there are 4 to 6 studs per wheel pressed or threaded into the wheel hub. The wheel and tire assembly is mounted on the hub centering ring and the studs protrude from the hub through the wheel mounting holes. Lug nuts are threaded onto the studs to securely hold the wheel to the hub.

When to consider replacing wheel studs:

  • Wheel is loose or wobbling. The wheel and tire assembly must be held evenly and securely to the wheel hub by the lug nuts attached to the studs. If the lug nuts are not tightened securely, it can cause the wheel to vibrate, loosen and wobble, which can damage or even break the wheel studs and lug nuts, potentially causing the wheel to separate from the vehicle.
  • Missing or broken studs, or damaged threads. If the stud is missing or broken, the lug nut attached to the stud will be missing and the wheel will hold securely. When the threads on the stud are worn, rusted away, or otherwise damaged, the lug nut may not achieve the required torque and could come loose while driving.
  • Stud turns in place when fastening lug nut. When the stud spins in the wheel hub while tightening, it should be replaced. During replacement, the mounting hole in the wheel hub should be inspected for damage.

How do mechanics replace wheel studs?

  • The car is raised and supported on steel jack stands.
  • The wheel and tire assembly, brake rotor, and caliper are removed.
  • On vehicles where there is sufficient access at the back of the wheel hub, a compact tool is used to press the defective stud out of the hub.
  • On vehicles where there is no access to use a compact stud remover, the wheel hub must be removed. When the hub must be pressed out of the steering knuckle, the wheel bearing is typically replaced in the process of removing the hub. Sometimes, the entire hub and bearing assembly with the studs included can be replaced.
  • The new stud or studs are pressed into position from the back of the hub, the brake caliper and rotor are reinstalled, and the wheel is placed onto the studs.
  • The wheel lug nuts are tightened to the factory specifications.

Is it safe to drive with wheel stud problems?

No, but you can temporarily drive a vehicle at low speeds and for short trips with one missing wheel stud. However, if more than two studs are broken, it is recommended to repair the car prior to further use. Having all wheel studs in place with evenly tightened lug nuts prevents distortion of the brake rotor. Over longer periods, missing studs can damage the brake rotor, the wheel, and the remaining studs. A car may vibrate when driving with missing wheel studs and can cause the other studs or lug nuts to loosen. This can lead to the wheel separating from your tire while driving.

When replacing wheel studs keep in mind:

  • Wheel studs are made of high-strength steel. If a stud has broken, it is typically due to previous overtightening. Lug nuts should be tightened using a calibrated torque wrench or a torque limiting device.
  • Published torque values assume that studs are dry, clean, and free of all lubricants. Oil, grease, anti-seize or any similar compound should not be applied to the threads of a wheel stud or lug nut.
  • Should a vehicle require removal of the wheel hub to add a new wheel stud, studs on the hub should be replaced. However, only defective studs need to be replaced if there is access from the back of the hub.
  • Lug nuts should be tightened in a star or crisscross pattern specified by the original equipment manufacturer in order to avoid warping of the brake rotor or drum as well as damaging the wheel.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(10)

Rating Summary
9
0
0
0
1
9
0
0
0
1

Duy

13 years of experience
113 reviews
Duy
13 years of experience
Nissan Rogue Sport L4-2.0L - Oil Change - Austin, Texas
Awesome

John

27 years of experience
1019 reviews
John
27 years of experience
Nissan Rogue Sport L4-2.0L - Ignition Coil - Webster, Texas
Thank you so much!! Will be back!!

Shane

17 years of experience
224 reviews
Shane
17 years of experience
Nissan Rogue Sport L4-2.0L - Brake Pads Replacement (Front, Rear) - Austin, Texas
Shane did an excellent job with my car. Her was very friendly and professional. I Will definitely be using him again.

Bryan

2 years of experience
92 reviews
Bryan
2 years of experience
Nissan Rogue Sport L4-2.0L - Brake System Inspection - Fort Lauderdale, Florida
Great Service!

Excellent Rating

(10)

Rating Summary
9
0
0
0
1
9
0
0
0
1
Number of Nissan Rogue Sport services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

How to Test for ASE Master Certification
If If you’re looking for automotive technician jobs (http://yourmechanic.com/automotive-technician-jobs) that pay more money, one solution is to simply invest in your own education. By becoming dealership certified in a particular manufacturer, you’ll be a specialist who will enjoy a much...
P0509 OBD-II Trouble Code: Idle Air Control System Circuit High
P0509 means that your vehicle’s PCM has picked up on an inconsistency regarding the RPM of the engine when it’s in idle due to leaks, or shortages.
P0881 OBD-II Trouble Code: Traction Control Module (TCM) Power Input Signal Range/Performance
P0881 means the traction control module is not working properly, possibly due to a faulty ON/OFF switch or damaged electrical components.

Clutch does not engage and I cannot shift gears.

Hello and thanks for the question. Your problem could actually be linked to two separate systems, one would be the hydraulic system consisting of the clutch master cylinder and the slave cylinder located at or inside the bell housing of...

My car is making a weird high-pitched whirring sound - 2000 Pontiac Sunfire

Hi there. In most cases when you hear a screaming or squealing noise under the hood, it's related to a belt that is loose or is beginning to show signs of wear. Since you're having AC issues, the problem could...

I changed the brake pads recently, there is now a knocking sound when applying the brakes

You are hearing the brake pads moving up and back in the caliper bracket. This is caused by the front rotors being warped, and it is also possible that the pads' anti-rattle clips were not installed correctly. The rotors should...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com