Nissan Pulsar NX Car pulls in one direction Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(11,379)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(11,379)

Car pulls in one direction Inspection Service

How much does a Car pulls in one direction Inspection cost?

On average, the cost for a Nissan Pulsar NX Car pulls in one direction Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1983 Nissan Pulsar NXL4-1.6LService typeCar pulls in one direction InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1988 Nissan Pulsar NXL4-1.6LService typeCar pulls in one direction InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1985 Nissan Pulsar NXL4-1.6LService typeCar pulls in one direction InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 Nissan Pulsar NXL4-1.8LService typeCar pulls in one direction InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1990 Nissan Pulsar NXL4-1.6LService typeCar pulls in one direction InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1986 Nissan Pulsar NXL4-1.6LService typeCar pulls in one direction InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1984 Nissan Pulsar NXL4-1.5L TurboService typeCar pulls in one direction InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1984 Nissan Pulsar NXL4-1.6LService typeCar pulls in one direction InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Nissan Pulsar NX Car pulls in one direction Inspection prices

Driving a car that pulls to one side is not only inconvenient, but it is also very dangerous. Maintaining constant pressure on the steering wheel to keep the car going straight is tiring and can pull your focus off the road. Plus, it can be very hard on your tires.

A pull to one side can be caused by a wide variety of issues -- everything from an underinflated tire to failed suspension parts.

Common reasons for this to happen:

Uneven Tire Pressure

Uneven tire pressure is a very common reason for a car to pull to one side. Lower pressure on one side changes the height of the tire, which causes the alignment to change. This is especially true if you have an underinflated rear tire. If the tire is underinflated, it will have increased rolling resistance which will make the pull to one side much more noticeable.

Over inflated tires are just as bad. This condition will also cause the alignment to change. An overinflated tire will cause the vehicle to push away from that tire, also creating abnormal tire wear.

You can see this in two ways:

  • An underinflated tire will show wear on the outer edges.
  • An overinflated tire will show wear down the center of the tire.

This is an easy fix: head to the local gas station and inflate all tires to their proper pressure. Tire pressure stipulations can usually be found on the driver’s side door jam. The optimal pressure is on a sticker. After you have inflated the tires back to their specifications, drive the vehicle to verify the pull is now gone.

Wheel Alignment

Another common cause of a car pulling to the side is a wheel that is out of alignment. Another symptom of misaligned wheels is uneven tread wear. Out-of-alignment wheels will quickly wear down and can lead to more serious issues if not addressed. You should have your vehicle aligned as soon as possible if this is the root cause of the pulling.

Alignment is not an adjustment of the wheels or tires, but of the suspension. A mechanic will adjust the suspension so that the angle of the tires is optimized and the tires make contact with the road according to the manufacturer specifications.

Brake Issues: Stuck Caliper, Collapsed Brake Hose, Unlubricated Slide Pins

Issues with the brake system can cause a vehicle to pull to one side. One of the most common brake issues is a stuck caliper. Brake calipers are powered by the hydraulic brake system and apply pressure to the brake pads to bring the car to a stop. If one of the calipers is stuck, the car will pull to that side.

Other brake issues that cause a car to pull include a collapsed brake hose, or slide pins that are in need of lubrication. Brake issues should be dealt with by a professional, as the braking system is a critical safety component of your car.

Bad Wheel Bearing

If you have a bad wheel bearing, there will probably be more serious symptoms present, but pulling to one side is also a warning sign.

Wheel bearings allow the friction-free rotation of the wheel hub assembly, providing smooth wheel rotation.

There are four wheel bearings on a vehicle, one at each wheel. When a wheel bearing wears out you will hear a grinding noise from the tire area, the steering wheel will sometimes shake, and the car will possibly pull to one side if it is starting to seize. This latter symptom often occurs long after you start hearing the grinding noise.

You should not drive your vehicle in this condition. Contact a mechanic immediately. Replacing a wheel bearing is a complicated repair and should be done by a professional.

Worn Suspension Components

At some point in your vehicle’s lifetime, most of the suspension will need replacing. Whether it is shocks or struts, ball joints, control arms or bushings, all the components wear out over time. As they become worn, they will often shift or lean to one side, especially during braking, which causes the car to pull to that side.

For example, a worn-out control arm bushing will shift when the brakes are applied, causing the vehicle to pull sharply to that side. Suspension parts tend to wear out slowly, so it is possible that you may not notice until they actually break.

The suspension is a key component of your car’s safety system and you should not drive it with broken or worn parts. An annual inspection of your suspension can help avoid surprises.

Worn Steering Linkage

A weak tie rod end will cause the steering wheel to shift to one side or the other while turning. If it gets extremely bad, the steering wheel could shake violently from side to side. Newer vehicles use a rack-and-pinion system that can sometimes be serviced. Older vehicles use a steering box and linkage system that is serviceable.

A broken or severely damaged steering linkage is extremely dangerous, as it could result in loss of control of the steering wheel. If you suspect any of these symptoms, have your car checked by a mechanic.

Torque Steer

Torque steer is when the car pulls to one side as the car initially accelerates. There can be several causes of this condition. Sometimes, loose steering components are the culprit. Other times, a broken motor mount is the cause. Too much slack in a tie rod, a failing lower control-arm bushing, or a ball joint with excess movement can all cause this problem.

You can test for this problem by putting your car in neutral and coasting it down the street. If the pull does not happen when coasting, your alignment is probably not the problem and torque steer could be the source of the issue.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the cause and source of the pulling issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A car is not safe to operate under conditions where it is pulling to one side. Regardless of whether it is a brake issue, suspension issue, or a bad wheel bearing, these repairs require the expertise of a professional. Book a mechanic to perform a thorough inspection as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(11,379)

Rating Summary
10,659
381
83
52
204
10,659
381
83
52
204

Sean

17 years of experience
111 reviews
Sean
17 years of experience
Nissan Pulsar NX L4-1.6L - Car is not starting - Waldorf, Maryland
I had a recurring problem with my older car that was not starting after sitting for a few days. Sean is very knowledgeable and explained the issues very clearly He analyzed the "new" battery and found a dead cell. He gave me a quote of other maintenance things I would need in the future.

Kiri

20 years of experience
372 reviews
Kiri
20 years of experience
Nissan Maxima V6-3.5L - Car pulls in one direction - Norristown, Pennsylvania
Kiri was very honest and took his time inspecting the car. He is the best

John

27 years of experience
1019 reviews
John
27 years of experience
Nissan Altima L4-2.5L - Car pulls in one direction - Webster, Texas
As always John takes exceptional care of my vehicle I will never use another mechanic he’s very thorough and honest and I appreciate that

Jeffrey

16 years of experience
102 reviews
Jeffrey
16 years of experience
Nissan Armada V8-5.6L - Oil Cooler Hose (Automatic Transmission) - Tampa, Florida
Awesome mechanic, arrived on time got promptly to work, was very honest and explained what was wrong, fixed it quickly and haven’t had an issue since!

Excellent Rating

(11,379)

Rating Summary
10,659
381
83
52
204
10,659
381
83
52
204
Number of Nissan services completed
125169+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Brake Light Bulb
Just Just like the light bulbs in the lamps inside your house, bulbs in your car’s lighting system eventually burn out. The brake light bulb is typically the same as the tail light bulb – when you step on the...
P0050 OBD-II Trouble Code: HO2S Heater Control Circuit (Bank 2 Sensor 1)
P0050 P0050 code definition HO2S Heater Control Circuit (Bank 2 Sensor 1) What the P0050 code means This code is found when the Engine Control Module (ECM) has detected an issue with the heater control circuit for the bank 2,...
How to Clean Evaporator Drain Tubes
The air conditioning system on a car has evaporator drain tubes than need cleaning if there is dirty air in the car or it is not blowing consistently.

Fuel problem

From the symptoms described, I would say that we are definitely experiencing fuel problems with your Chevy Blazer. There can be a few things keeping fuel from reaching the engine, such as a blown fuse or a bad fuel pump...

gas to diesel engine swap

Hi there. You will need to check with The State of Delaware's DMV to determine if this type of engine swap is legal. On the mechanical side, I wouldn't recommend this, unless you've got a pretty large budget for changing...

Is it safe to drive when the traction control, power steering, and stabilitrak lights are all on?

Generally, this is not something that will harm the vehicle, however when these lights are on this usually means that there is an issue with the anti-lock braking system. The traction control system (https://www.yourmechanic.com/services/traction-control-light-is-on-inspection) monitors the steering and stability of...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com