Nissan Juke Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(152)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(152)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Nissan Juke Power Steering Pump Replacement is $953 with $771 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Nissan JukeL4-1.6L TurboService typePower Steering Pump ReplacementEstimate$1744.46Shop/Dealer Price$2134.88 - $3295.61
2011 Nissan JukeL4-1.6L TurboService typePower Steering Pump ReplacementEstimate$1732.75Shop/Dealer Price$2120.87 - $3279.88
2015 Nissan JukeL4-1.6L TurboService typePower Steering Pump ReplacementEstimate$1732.75Shop/Dealer Price$2120.90 - $3279.94
2017 Nissan JukeL4-1.6L TurboService typePower Steering Pump ReplacementEstimate$1732.75Shop/Dealer Price$2120.90 - $3279.93
2013 Nissan JukeL4-1.6L TurboService typePower Steering Pump ReplacementEstimate$1732.75Shop/Dealer Price$2122.82 - $3283.29
2016 Nissan JukeL4-1.6L TurboService typePower Steering Pump ReplacementEstimate$1732.75Shop/Dealer Price$2121.08 - $3280.25
2012 Nissan JukeL4-1.6L TurboService typePower Steering Pump ReplacementEstimate$1732.75Shop/Dealer Price$2120.92 - $3279.97
Show example Nissan Juke Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(152)

Rating Summary
146
0
1
1
4
146
0
1
1
4

Carlos

29 years of experience
601 reviews
Carlos
29 years of experience
Nissan Juke L4-1.6L Turbo - Brake Pads Replacement (Rear) - Irvine, California
Great guy, please send Carlos every time.

Derrick

21 years of experience
109 reviews
Derrick
21 years of experience
Nissan Juke L4-1.6L Turbo - Cabin Air Filter Replacement - Newark, New Jersey
Derricks was the nicest guy. Very knowledgeable and patient. He explained to me what he was doing every step of the way. I highly recommend him!

Stephen

33 years of experience
220 reviews
Stephen
33 years of experience
Nissan Juke L4-1.6L Turbo - Car is not starting - Broomfield, Colorado
Steve is amazing! I was worried about my car having many issues, but Steve explained everything to me, and had my car starting in no time! I have never had such quick and honest service from a mechanic. I will only be using Steve and the site from now on.

Nolan

31 years of experience
296 reviews
Nolan
31 years of experience
Nissan Juke L4-1.6L Turbo - Fuel Pressure Sensor - Tucson, Arizona
Nolan completed repairs within time frame, answered all questions. He is very knowledgeable, and amiable.

Excellent Rating

(152)

Rating Summary
146
0
1
1
4
146
0
1
1
4
Number of Nissan Juke services completed
1672+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

P0073 OBD-II Trouble Code: Ambient Air Temperature Sensor Circuit High input
P0073 code definition Ambient Air Temperature Sensor Circuit High input Depending on the type of vehicle these are some related OBD-II Diagnostic...
How to Replace a Car's Steering Rack Gearbox
The steering gearbox transmits the driver's steering wheel inputs to the wheels so that the car turns correctly. If damaged, it should be replaced.
How Electric Vehicle Batteries are Recycled
Despite their rare-mineral composition, EV batteries can be processed and repurposed

Scrubbing noise from front of car.

If the vehicle needs all the ball joints replaced, I would recommend having that done by a professional to see if the noise goes away. The sound is likely occurring due to the excess amount of play in the front...

Van bogging down

The engine in these vehicles have too many possible problems to give you one or two but more than a dozen possible causes for the runs rough lack of power. I will give you the top two that stand out...

Cracked trans case on 2014 Ford escape se.

Hi Josh. Thanks for contacting us tonight. It must have been a pretty good hit to crack the CVT case - or hit at just the right spot. Assuming that the car is driving fine now, the only potential issues...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com