Nissan Cube Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(67)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(67)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Nissan Cube Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Nissan CubeL4-1.8LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2011 Nissan CubeL4-1.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2013 Nissan CubeL4-1.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Nissan CubeL4-1.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2010 Nissan CubeL4-1.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2012 Nissan CubeL4-1.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Nissan Cube Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(67)

Rating Summary
64
1
1
1
0
64
1
1
1
0

Breck

20 years of experience
681 reviews
Breck
20 years of experience
Nissan Cube L4-1.8L - Car is not starting - Houston, Texas
Fast and helpful

Christian

22 years of experience
68 reviews
Christian
22 years of experience
Nissan Cube L4-1.8L - Oil Change - Alviso, California

Raymond

27 years of experience
223 reviews
Raymond
27 years of experience
Nissan Cube L4-1.8L - Trunk does not lock or open - Victorville, California
He knows his stuff, guys!

Patrick

14 years of experience
16 reviews
Patrick
14 years of experience
Nissan Cube L4-1.8L - Spark Plug Replacement - Fair Oaks, California
Pat did a great job getting the spark plugs in my cube replaced. Thank you

Excellent Rating

(67)

Rating Summary
64
1
1
1
0
64
1
1
1
0
Number of Nissan Cube services completed
737+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

Top 10 Scenic Drives in Hawaii
There’s no denying that Hawaii is a tropical paradise, which is why so many tourists flock there throughout the year to get their fill of surf and sun. This network of islands has more to offer than beachside resorts and...
How Car Keypad Locks Work
Pioneered Pioneered by Ford, keypads let you lock, unlock without keys Pioneered by Ford, keypad door systems began appearing on high-end car and SUV products in the early 1980s. Ford took advantage of the then-new digital computer revolution – the...
P0877 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch “D” Circuit Low
P0877 means that the transmission fluid pressure that is above or below factory spec due to low fluid level, overheating engine, or faulty sensors.

it just stop responding when I accelerate, then I will have to switch the key off and on and then it will gain power again .

Most of the time this is something wrong with the throttle body assembly or the throttle pedal module. These two work together to open and close the throttle plate as you push on and let off of the gas pedal....

Did intake gasket. Car now bogs and stalls when started. Maf and misfire codes

Hello, thank you for writing in. Simply pulling the mass airflow sensor is not a good enough test. You will want to test it with a multimeter to get an accurate reading on how it is working. The symptoms you...

My car turns over but wont start.

Claimed by Jeff Engstrom

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com