Mercury Villager Traction Control Switch Replacement at your home or office.

What is the Traction Control Switch all about?

Most modern vehicles are equipped with anti-lock brakes and traction control. Traction control prevents unnecessary wheel spin at the drive wheels by either reducing engine power or applying the brakes slightly. An override switch may be installed in the dash in the event that the traction control needs to be turned off, which would usually be used in a situation where your vehicle is stuck in mud or snow, or for maximum acceleration purposes and a more driver-centric experience. On nearly all makes of light duty vehicles, the traction control button needs to be pressed for approximately three seconds to turn the traction control off. To re-employ traction control, a simple press of the button turns it back on. If the traction control switch is not working properly, the traction control may not turn off or back on when pressed, and a service traction control warning can illuminate on your dash. You may not be able to spin your tires to get out of a situation where you are stuck.