Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.
How A Diagnostic Works
Instantly book a certified mobile mechanic to come to you
Mechanic diagnoses the problem and quotes necessary repairs
Your vehicle is ready to go
Fair, upfront & transparent pricing for all services
Our certified mobile mechanics can come to you now.
On average, the cost for a Mercury Sable Brake fluid is leaking Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.
| Car | Service | Estimate | Shop/Dealer Price |
|---|---|---|---|
| 1988 Mercury SableV6-3.8L | Service typeBrake fluid is leaking Inspection | Estimate$114.99 | Shop/Dealer Price$124.99 - $132.49 |
| 2000 Mercury SableV6-3.0L | Service typeBrake fluid is leaking Inspection | Estimate$94.99 | Shop/Dealer Price$105.01 - $112.52 |
| 1995 Mercury SableV6-3.0L | Service typeBrake fluid is leaking Inspection | Estimate$94.99 | Shop/Dealer Price$105.01 - $112.52 |
| 1992 Mercury SableV6-3.8L | Service typeBrake fluid is leaking Inspection | Estimate$94.99 | Shop/Dealer Price$104.99 - $112.48 |
| 2004 Mercury SableV6-3.0L | Service typeBrake fluid is leaking Inspection | Estimate$94.99 | Shop/Dealer Price$105.02 - $112.55 |
| 1991 Mercury SableV6-3.0L | Service typeBrake fluid is leaking Inspection | Estimate$94.99 | Shop/Dealer Price$105.01 - $112.52 |
| 2003 Mercury SableV6-3.0L | Service typeBrake fluid is leaking Inspection | Estimate$99.99 | Shop/Dealer Price$109.87 - $117.28 |
| 1990 Mercury SableV6-3.0L | Service typeBrake fluid is leaking Inspection | Estimate$99.99 | Shop/Dealer Price$110.24 - $117.94 |
Your brakes are the most important safety system on your vehicle. It’s all too easy to take them for granted, but if they were to fail even once, the results could be catastrophic. Most automotive brake systems are hydraulic, which means that pressurized fluid is sent through the lines from the master cylinder to the calipers and drums in order to activate the pads/shoes and slow down the car. If your brake fluid is leaking, it’s a sign that there’s something seriously wrong.
Your brake system is both simple and complex. There are a number of parts required to make it work properly, but the underlying concept is not that difficult to understand. Your master cylinder is the heart of the system – it is responsible for both boosting brake performance (via the brake booster onto which the master cylinder mounts), and for holding and sending brake fluid through the system.
In a nutshell, your brake system works like this: You press the brake pedal, which activates the master cylinder. It pushes fluid into the lines and down to the calipers. The fluid pressure forces the calipers to close, squeezing the rotor between the brake pads. This creates drag and friction, slowing down the car.
However, if fluid is leaking from somewhere in the system, it could mean that you’ll have insufficient fluid for proper brake operation.
Worn Brake Pads: If you suspect fluid is leaking because the level in the reservoir is low, it might be nothing more than worn pads. As the pads wear, more fluid is held in the system (because the caliper piston remains farther out due to the reduced pad material).
Damaged Master Cylinder Reservoir: Over time, the plastic reservoir attached to your master cylinder becomes brittle due to heat exposure. It can eventually crack, allowing brake fluid to seep out and down the back of the engine.
Damaged Bleeder Valve: Each caliper has a bleeder. These valves allow mechanics to bleed air out of the lines, but they can become damaged (or can be knocked loose or even left loose after inexpert service).
Damaged Brake Line: Your car has both rubber and steel brake lines that carry fluid to and from the master cylinder. Both types are prone to wear and can be punctured. If this occurs, fluid will steadily leak out of the line.
Failed Wheel Cylinder: On drum brakes, one of the most likely culprits is the wheel seal. These will fail over time and through normal wear and tear, eventually weeping brake fluid.
Failed Piston Seal: The piston in your caliper is activated by fluid, and it’s a moving part, which means a seal is necessary to keep the fluid inside while allowing the piston to move. If the seal is damaged (cracked or punctured), it will leak brake fluid.
A professional mobile mechanic will come to your home or office to inspect your brake system, including the master cylinder, brake lines, drums, calipers and other components. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.
The mechanic will inspect all aspects of your vehicle’s brake system, including possibly checking trouble codes in the computer if the ABS light is on (set off by the brake fluid level sensor). The mechanic will trace the leak to its origin, and then advise you on the next step required to repair the problem.
Without an operational brake system, your car cannot be legally or safely driven. Leaking fluid is cause for concern – if the fluid level drops below a certain level, the brakes will not work. It’s essential to have your brake system inspected during normal maintenance, and to pay close attention to the fluid level in the reservoir. Any leaks should be immediately inspected and repaired. One of our professional mechanics can inspect, diagnose and repair your brake fluid leak.
Fast and easy service at your home or office
Backed by 12-month, 12.000-mile guarantee
Real customer reviews from Mercury owners like you.
Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.
