Mercedes-Benz SLK300 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Mercedes-Benz SLK300 Car Thermostat Replacement is $456 with $204 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Mercedes-Benz SLK300V6-3.0LService typeCar Thermostat ReplacementEstimate$783.58Shop/Dealer Price$921.07 - $1308.01
2011 Mercedes-Benz SLK300V6-3.0LService typeCar Thermostat ReplacementEstimate$671.00Shop/Dealer Price$778.83 - $1089.33
2016 Mercedes-Benz SLK300L4-2.0L TurboService typeCar Thermostat ReplacementEstimate$1092.11Shop/Dealer Price$1272.06 - $1791.39
2009 Mercedes-Benz SLK300V6-3.0LService typeCar Thermostat ReplacementEstimate$767.36Shop/Dealer Price$899.36 - $1282.18
Show example Mercedes-Benz SLK300 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0

Anthony

5 years of experience
85 reviews
Anthony
5 years of experience
SLK300 2011 - Electric Problems - Elk Grove, CA
ARRIVED ON TIME

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0
Number of Mercedes-Benz SLK300 services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0808 OBD-II Trouble Code: Clutch Position Sensor Circuit High Malfunction
P0808 means there is an issue within the clutch position sensor circuit (manual) or with the PCM in automatic transmissions due too defective parts.
A Buyer’s Guide to the 2012 Mercedes Benz S350 BlueTec
The The 2012 Mercedes Benz S350 BlueTec brings diesel to the S-Class line in an extravagant way. With exceptional luxury, comfort and performance, you’ll have to schedule a test drive just to experience it for yourself. Once you do, you...
P002A OBD-II Trouble Code: "B" Camshaft Profile Control Circuit/Open
Diagnostic Diagnostic Trouble Code (DTC): P002A What the P002A code means Engines operate by way of a system of moving parts that open the intake valves (for allowing gas into the cylinders) and exhaust valves (which carry the vapors away)....

How Does Engine Timing Work?

Engine timing (https://www.yourmechanic.com/article/how-engine-timing-works) is actually a closely coordinated dance between valve timing, injector timing, and spark timing. Valve timing is the control of opening and closing the intake and exhaust valves in synchronization with the up / down movement of...

Could it be because of transmission that car lose power and won't move now into drive or reverse but engine is fine and functional

Hi Danielle. Thanks for contacting us today. There could be a few issues causing this problem, ranging from an inner transmission seal leak, a shift solenoid failure or other internal transmission components being damaged. This is something that a professional...

I hear a loud noise upon start up but it’s only when starting for a few seconds

Among the possible causes of the noise you are describing are a glazed or slipping serpentine (or other drive) belt and a starter motor with a pinion drive gear that is not fully and immediately retracting from the ring gear...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com