Mercedes-Benz R320 Power Steering Control Valve Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,647)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5,647)

Power Steering Control Valve Replacement Service

How much does a Power Steering Control Valve Replacement cost?

On average, the cost for a Mercedes-Benz R320 Power Steering Control Valve Replacement is $617 with $313 for parts and $304 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Mercedes-Benz R320V6-3.0L Turbo DieselService typePower Steering Control Valve ReplacementEstimate$994.07Shop/Dealer Price$1206.60 - $1718.18
2008 Mercedes-Benz R320V6-3.0L Turbo DieselService typePower Steering Control Valve ReplacementEstimate$930.07Shop/Dealer Price$1142.70 - $1654.36
2007 Mercedes-Benz R320V6-3.0L Turbo DieselService typePower Steering Control Valve ReplacementEstimate$930.07Shop/Dealer Price$1142.69 - $1654.34
Show example Mercedes-Benz R320 Power Steering Control Valve Replacement prices

What is the Power Steering Control Valve all about?

Power steering pumps create high pressure in order to push fluid through the system, into the power steering rack, and provide good handling. There are many different components that play critical roles in this process, and the power steering control valve is one of them. You might be more familiar with this as the flow-control valve.

In most setups, the power steering control valve is located at the outlet of the pump, where the fluid leaves the pump and enters the supply line. It regulates the pressure of the fluid in the line to the correct PSI. If the valve fails, the fluid pressure may become too low or too high. Excessive pressure can cause damage to the supply line, creating leaks and fire hazards (power steering fluid is flammable).

Keep in mind:

  • The power steering control valve is not part of any service or maintenance regimen.
  • It is not possible to check the valve for operation during basic maintenance, so it will only be inspected if there is a problem.
  • Failure of the control valve will create problems with steering and handling.
  • In most instances, valve failure will require replacement of the power steering pump itself.

How it's done:

  • The power steering control valve is checked for replacement
  • The power steering control valve is removed
  • The new power steering control valve is installed
  • The power steering system is refilled and checked for leaks
  • The engine is run and the power steering system operation is checked

Our recommendation:

While the power steering valve does not require any regular maintenance you may request that it is diagnosed if your car exhibits any of the symptoms. Your power steering system is an important component of your vehicle, ensuring simplified handling through all types of turns. However, a failing power steering control valve can cause drops in fluid pressure, creating harder steering. Have any malfunction or problem with your power steering system inspected by one of our expert mechanics immediately.

What common symptoms indicate you may need to replace the Power Steering Control Valve?

  • Hard steering at higher speeds
  • Whining noise during turning

How important is this service?

Your power steering system might not be as critical to vehicle operation as the engine and transmission, but it enhances safety and makes steering easier. If you notice any problems with your power steering system, have the vehicle inspected and the problem diagnosed as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,647)

Rating Summary
5,256
190
54
28
119
5,256
190
54
28
119

Ben

41 years of experience
1436 reviews
Ben
41 years of experience
Mercedes-Benz R320 V6-3.0L Turbo Diesel - Oil Change - Katy, Texas

Tung

16 years of experience
310 reviews
Tung
16 years of experience
Mercedes-Benz R320 V6-3.0L Turbo Diesel - Exhaust Gas Recirculation (EGR) Tube - Marietta, Georgia
Tung worked hard and got the job done! Highly recommended.

Chris

16 years of experience
332 reviews
Chris
16 years of experience
Mercedes-Benz R320 V6-3.0L Turbo Diesel - Serpentine/Drive Belt - Spring Valley, California
Friendly

Matthew

33 years of experience
1247 reviews
Matthew
33 years of experience
Mercedes-Benz 260E L6-2.6L - Distributor Rotor and Cap - Hampton, Virginia
Matthew was great, knowledgeable, courteous and took the time to explain what’s going on.

Excellent Rating

(5,647)

Rating Summary
5,256
190
54
28
119
5,256
190
54
28
119
Number of Mercedes-Benz services completed
62117+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Understanding Braking and Stopping Distance
To To a driver, braking appears to happen in a very short amount of time. In reality, a car can travel an alarming distance before coming to a complete stop when traveling at highway speeds. Even with such advanced technology...
How to Buy a Good Quality Steering Column
Your Your steering column is part of the overall steering system, and while it may not look like much, it is critical to keeping your car on the road and moving in the direction that you want it to move....
P2231 OBD-II Trouble Code: O2 Sensor Signal Circuit Shorted to Heater Circuit Bank 1 Sensor 1
P2231 P2231 code definition O2 Sensor Signal Circuit Shorted to Heater Circuit Bank 1 Sensor 1 What the P2231 code means P2231 is an OBD-II generic code for the engine control module (ECM) detecting the O2 sensor signal is shorted...

cost to replace valve lifters, is this something I can do.

In order to replace the valve lifters on the engine it requires removing the intake manifold and cylinder heads to gain access to the lifters and lifter guides. This kind of job calls for a minimum of at least 10...

How do you remove the electrical connector from the power steering pressure sensor on a 2007 AWD Nissan Murano.

You first have to remove the rubber boot back and then the release is on the sides and all you do is squeeze the sides and it should come loose for the sensor.

P2098, P0153

Hi, thanks for writing in. If you have replaced both of the O2 sensors on bank 2, and reset the fail codes, it may still take a certain number of start/run cycles before the ECM (engine computer) decides it's okay...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com