Mercedes-Benz ML350 Brake Vacuum Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(407)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(407)

Brake Vacuum Pump Replacement Service

How much does a Brake Vacuum Pump Replacement cost?

On average, the cost for a Mercedes-Benz ML350 Brake Vacuum Pump Replacement is $397 with $302 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Mercedes-Benz ML350V6-3.5LService typeBrake Vacuum Pump ReplacementEstimate$1538.85Shop/Dealer Price$1912.32 - $2993.34
2006 Mercedes-Benz ML350V6-3.5LService typeBrake Vacuum Pump ReplacementEstimate$736.23Shop/Dealer Price$914.07 - $1408.15
2012 Mercedes-Benz ML350V6-3.0L Turbo DieselService typeBrake Vacuum Pump ReplacementEstimate$956.01Shop/Dealer Price$1188.80 - $1847.71
2010 Mercedes-Benz ML350V6-3.5LService typeBrake Vacuum Pump ReplacementEstimate$698.35Shop/Dealer Price$866.68 - $1332.32
2005 Mercedes-Benz ML350V6-3.7LService typeBrake Vacuum Pump ReplacementEstimate$764.73Shop/Dealer Price$947.86 - $1445.91
2011 Mercedes-Benz ML350V6-3.0L Turbo DieselService typeBrake Vacuum Pump ReplacementEstimate$956.01Shop/Dealer Price$1188.80 - $1847.71
2014 Mercedes-Benz ML350V6-3.0L Turbo DieselService typeBrake Vacuum Pump ReplacementEstimate$961.01Shop/Dealer Price$1193.56 - $1852.29
2004 Mercedes-Benz ML350V6-3.7LService typeBrake Vacuum Pump ReplacementEstimate$881.22Shop/Dealer Price$1084.59 - $1597.83
Show example Mercedes-Benz ML350 Brake Vacuum Pump Replacement prices

What is the Brake Vacuum Pump all about?

The brake booster is a device that helps enhance the effects of the hydraulic braking system in cars as a supplement to the primary braking mechanism. Each time you push the brake pedal, the force transfers to a rod. This rod passes through the brake booster and reaches the master cylinder. The pressure from the rod activates the master cylinder piston and works on the hydraulic braking systems.

The brake booster chamber contains a vacuum the engine creates. This chamber has two sections, separated vertically by way of a rubber diaphragm. When the brake pedal pushes the rod, a small amount of air is let into the chamber on the brake pedal side through a valve that also seals off the vacuum. This air pressure on one side of the diaphragm helps enhance the force of the brake.

However, in case of cars that have turbo charging or use diesel as fuel, the engine does not create the necessary vacuum. Thus, they need an additional brake booster vacuum pump to draw out the air and create the vacuum needed for the brake booster to function. Vehicles that typically run in locations of high altitude also need a brake booster vacuum pump.

The brake booster vacuum pump reduces dependency on the engine for the vacuum and can work independently of it. This device uses an electrical control circuit to work. It activates with a signal from the brake booster vacuum sensor that monitors the levels of the vacuum in the brake booster.

Keep in mind:

  • The brake booster vacuum pump should be able to maintain up to 18” of vacuum for the brake booster to be effective.
  • If you notice that the pedal has slipped to the floor of the car and you hear a hissing sound, this could be an indication of a leak in the air line or pump to the brake booster vacuum pump.

How it's done:

  • The battery is disconnected. The faulty brake booster vacuum pump is located and identified. The vehicle is raised and supported on jack stands as needed. The engine under shield is removed for access.

  • The brake booster vacuum pump hoses and electrical connector are disconnected. The brake booster vacuum pump is removed from the mounting bracket.

  • The new brake booster vacuum pump is installed onto the mounting bracket. The hoses and electrical connector are installed to the new brake booster vacuum pump. The battery is reconnected.

  • The brakes are tested for proper brake booster vacuum pump operation. The engine shield is reinstalled. The vehicle is removed from the jack stands.

  • The vehicle is road tested and checked for proper brake booster vacuum pump and brakes operation.

Our recommendation:

If you notice the brakes are not responding as they should, book an appointment with one of our expert mechanics and have the brake booster system completely inspected. The mechanic will check the brake booster vacuum pump for damage and advise you if it needs replacing. Refer to the owner’s manual for recommendations on the frequency in which you must have the brake booster vacuum pump replaced.

What common symptoms indicate you may need to replace the Brake Vacuum Pump?

  • Delayed brake response
  • Excessive pressure is needed to make the brake respond
  • A hissing sound when you press the brake pedal
  • Brake pedal slips to the floor of the car when the engine is running and the car is stationary
  • Braking becomes especially difficult in heavy traffic areas when the brakes need to be applied in quick succession

How important is this service?

A malfunctioning brake booster vacuum pump will not create the adequate vacuum needed for the brake boosters or power brakes to function. This undermines the effectiveness of your brakes and can be a safety hazard.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(407)

Rating Summary
386
8
3
1
9
386
8
3
1
9

Attila

19 years of experience
906 reviews
Attila
19 years of experience
Mercedes-Benz ML350 V6-3.0L Turbo Diesel - Check Engine Light is on - Edgewater, New Jersey
was helpful, made me understand the problem

Bobby

27 years of experience
88 reviews
Bobby
27 years of experience
Mercedes-Benz ML350 V6-3.5L - Oil Change - Charlotte, North Carolina
Bobby was outstanding! He did a great job, was punctual, trustworthy and explained everything. I will most definitely be scheduling my next service with him!

Logan

49 years of experience
82 reviews
Logan
49 years of experience
Mercedes-Benz ML350 V6-3.5L - Brake Pads Replacement (Front, Rear) - Livermore, California
Great as always.

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Mercedes-Benz ML350 V6-3.7L - Canister Purge Solenoid - Pinole, California
Josh is very good at his work.

Excellent Rating

(407)

Rating Summary
386
8
3
1
9
386
8
3
1
9
Number of Mercedes-Benz ML350 services completed
4477+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

What Special Tools Are Needed to Service Hoses in a Car?
Automotive technician jobs require tools for repairing or replacing car hoses. Crimp clamp tools and special hose pliers will make hose jobs easier.
A Buyer’s Guide to the 2011 Mitsubishi Endeavor
The The 2011 Mitsubishi Endeavor is a crossover SUV that manages to provide decent comfort, power and performance into a single package. This also marked the final year of production for the SUV, as it was phased out due to...
P0727 OBD-II Trouble Code: Engine Speed Input Circuit No Signal
P0727 code means that the engine speed input sensor is not properly functioning often due too corroded wires or defective shift solenoids.

Turn signal won't blink

Hi there. If the turn signals will come on, but will not blink then the flasher module has failed. This module is what turns the lights off and on when the turn signal or hazards are used. It is possible...

Loud bang when backing up only

If the only time the pop occurs is when you are backing up and turning, then this isn't necessarily something that must be fixed immediately. Many trucks will exhibit such noises and most of the time they don't have any...

I was at a stop light. Car acted like it wanted to die and the oil light flicked on and off

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com