Mercedes-Benz GLK350 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(237)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(237)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz GLK350 Power Steering Pressure Hose Replacement is $574 with $280 for parts and $294 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Mercedes-Benz GLK350V6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$1342.26Shop/Dealer Price$1528.56 - $2022.24
2010 Mercedes-Benz GLK350V6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$1231.91Shop/Dealer Price$1386.76 - $1818.10
2014 Mercedes-Benz GLK350V6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$935.84Shop/Dealer Price$1099.99 - $1577.06
2012 Mercedes-Benz GLK350V6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$1381.71Shop/Dealer Price$1574.21 - $2118.04
2011 Mercedes-Benz GLK350V6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$1381.71Shop/Dealer Price$1586.07 - $2138.80
Show example Mercedes-Benz GLK350 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(237)

Rating Summary
224
6
3
0
4
224
6
3
0
4

Allen

37 years of experience
471 reviews
Allen
37 years of experience
Mercedes-Benz GLK350 V6-3.5L - Oil Change - Apopka, Florida
Fantastic!

Rusty

24 years of experience
567 reviews
Rusty
24 years of experience
Mercedes-Benz GLK350 V6-3.5L - AC is not working - Arlington, Texas
I’ve had Rusty before and he was great as always. I will continue to ask for him.

James

32 years of experience
705 reviews
James
32 years of experience
Mercedes-Benz GLK350 V6-3.5L - Battery - Anaheim, California
What a fantastic experience! I was sure I’d have to tow my car to the dealership, which would involve a lot of waiting and hassle. I found your website and, instead of all the trouble, I had a friendly mechanic show up at my home right on time and change my battery on the spot. It was quick and easy. I’m completely sold!

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
Mercedes-Benz GLK350 V6-3.5L - Oil Change - Houston, Texas
Ben was absolutely amazing!!! He arrived on time and was so professional. From this point on, I'd only choose Ben.

Excellent Rating

(237)

Rating Summary
224
6
3
0
4
224
6
3
0
4
Number of Mercedes-Benz GLK350 services completed
2607+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Understanding the Audi Service Due and Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Audi Service Due light indicates when your car needs service.
How to Add Oil to Your Car
Adding Adding oil is a simple, painless process. To understand how it works, you need to know that oil operates in a closed loop system and is stored in the oil pan (https://www.yourmechanic.com/article/how-long-does-an-oil-pan-last). The oil pan holds up to 4...
How to Drive in an Urban Area If You're from the Countryside
Driving in an urban area can be hassle if you're used to the countryside. Plan your route ahead and use good driving methods to make your trip easier.

How much would it cost to put a 6.1 or 6.4 hemi in my truck? 2001 RAM 1500

Hi there - unfortunately, this is not a service YourMechanic can offer at this time. Thanks for thinking of us however!

Car feels like it is in neutral

This is often a sign of low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or a faulty transmission control solenoid. As you know, automatic transmissions use pressurized hydraulic fluid to change gears. Every time a gear change is required, the car's computer activates a...

2006 Ford Explorer w/over 200k miles on it. Worth fixing??

If you have oil all over the engine bay, it's possible that there's just a valve cover gasket leak which is a fairly common repair done on many vehicles as they get older. As far as the tires it's possible...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com