Mercedes-Benz GL320 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(12)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(12)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Mercedes-Benz GL320 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Mercedes-Benz GL320V6-3.0L Turbo DieselService typeWindows InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2009 Mercedes-Benz GL320V6-3.0L Turbo DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2007 Mercedes-Benz GL320V6-3.0L Turbo DieselService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Mercedes-Benz GL320 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(12)

Rating Summary
11
0
0
0
1
11
0
0
0
1

Breck

20 years of experience
681 reviews
Breck
20 years of experience
Mercedes-Benz GL320 V6-3.0L Turbo Diesel - Alternator Repair - Houston, Texas
Breck was courteous and very skilled. He did the job very quickly! Much less time than Mercedes quoted. He called to schedule an earlier time and was punctual. Highly recommend Breck. Very satisfied with Breck and the job.

Maxwell

18 years of experience
390 reviews
Maxwell
18 years of experience
Mercedes-Benz GL320 V6-3.0L Turbo Diesel - Crankshaft Position Sensor - Conroe, Texas
My first experience with YourMechanic, and I can not say enough nice things about Maxwell. Awesome communication, knowledgeable and very helpful. Will continue to use Maxwell in the future for all of my Mercedes service needs.

Daniel

11 years of experience
72 reviews
Daniel
11 years of experience
Mercedes-Benz GL320 V6-3.0L Turbo Diesel - Serpentine/Drive Belt - Chicago, Illinois
Trust me Daniel knows what he’s doing

Claud

8 years of experience
482 reviews
Claud
8 years of experience
Mercedes-Benz GL320 V6-3.0L Turbo Diesel - Coolant is leaking - Inkster, Michigan
He was very nice. Definitely help me feel confident in choosing him as my mechanic

Excellent Rating

(12)

Rating Summary
11
0
0
0
1
11
0
0
0
1
Number of Mercedes-Benz GL320 services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Find Top Dead Center
There There are many reasons why you might need to find an engine’s top dead center. Top dead center is the point when the piston of the number one cylinder in an engine is at its highest point, and on...
What is Usage-Based Car Insurance?
There’s There’s no avoiding the fact that you need car insurance (https://www.yourmechanic.com/article/5-essential-things-to-know-about-car-insurance) to own or operate a vehicle. Without it, any damage or liability would fall squarely on your shoulders as the offending driver and the financial burden would be...
P0786 OBD-II Trouble Code: Shift/Timing Solenoid Range/Performance
P0786 means there is a problem with the shift/timing solenoid due to a low fluid levels, faulty solenoid, or internal transmission components.

What would stop the ignition lock cylinder from going back in its casing?

Unfortunately, without physically seeing the ignition cylinder in person, it would be difficult to determine why it is unable to go back in. One thing you can attempt to do is to take your Dodge's ignition cylinder to a locksmith...

How problem free is the Ford 3.2L Turbo Diesel compared to the Mercedes 3.0L Diesel used in small RV's?

Personally I would take the Mercedes over the Ford, but the truth is, diesels are undergoing a massive engineering revamping of their emissions systems. Emissions on diesels is new to the automotive market making these systems problematic until the manufacturers...

Im putting in a2005 ford 4.2 in my 98 ford f150 do you see any problem

Hello. If you are using the base engine then you should be just fine. The intake and exhaust as well as the sensors will work different so all of that will need to be switched over.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com