Mercedes-Benz E63 AMG S Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz E63 AMG S Power Steering Pressure Hose Replacement is $695 with $401 for parts and $294 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Mercedes-Benz E63 AMG SV8-5.5L TurboService typePower Steering Pressure Hose ReplacementEstimate$1128.28Shop/Dealer Price$1347.88 - $1964.14
Show example Mercedes-Benz E63 AMG S Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0

Ibrahim

8 years of experience
76 reviews
Ibrahim
8 years of experience
Mercedes-Benz E63 AMG S V8-4.0L Turbo - Battery - Atlanta, Georgia
great

James

24 years of experience
130 reviews
James
24 years of experience
Mercedes-Benz R350 V6-3.5L - Power Steering Pressure Hose - Douglasville, Georgia
Best job a mechanic can do without any stalling.

David

11 years of experience
199 reviews
David
11 years of experience
Mercedes-Benz ML350 V6-3.5L - Power Steering Pressure Hose - Ocoee, Florida
Great service

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Mercedes-Benz E320 L6-3.2L - Power Steering Pressure Hose - Vallejo, California
mr floyd was very friendly and fixed the problem right away, and also gave some good advice on how to maintain and keep my car running in good condition.

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0
Number of Mercedes-Benz Power Steering Pressure Hose Replacement services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Pinion Seal
Common signs include a leaking pinion seal, low fluid in the differential, and a whining noise while the vehicle is in motion.
How to Find a Custom Cover for Your Car
For For those without the benefit of a temperature-controlled garage or other storage space for our vehicles, car covers can serve as a useful substitute to preserve both the paint and body of a vehicle. Deciding what cover to buy...
P0098 OBD-II Trouble Code: Intake Air Temperature Sensor 2 Circuit High
P0098 P0098 code definition Intake Air Temperature Sensor 2 Circuit High What the P0098 code means P0098 is the OBD-II generic code indicating the engine control module (ECM) has determined that the intake air temperature sensor 2 (IAT2) has an...

Radiator issue with my car.

Generally a radiator is not going to cause a car not to start - it is only a heat exchanger for the engine coolant. I think your problem would be more drivability in the fuel (fuel pump injectors fuel lines)...

Knocking when engine warms up

When the engine is cold, the viscosity of the oil is higher along with the internal bearing clearances in the engine. As the engine warms both the viscosity of the oil lowers and the engine bearing clearances can increase dropping...

Failsafe mode

A scanner has to be applied to look at long and short term fuel trim, the waveform output of the oxygen sensors and other key engine operating parameters. Hesitation is definitely due to a fuel or ignition system fault and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com