Mercedes-Benz E420 Car door is sagging Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(24)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(24)

Car door is sagging Inspection Service

How much does a Car door is sagging Inspection cost?

On average, the cost for a Mercedes-Benz E420 Car door is sagging Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Mercedes-Benz E420V8-4.2LService typeCar door is sagging InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1997 Mercedes-Benz E420V8-4.2LService typeCar door is sagging InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1995 Mercedes-Benz E420V8-4.2LService typeCar door is sagging InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Mercedes-Benz E420 Car door is sagging Inspection prices

A sagging car door can be incredibly frustrating. It may seem like a relatively insignificant problem, but in reality it can be a real inconvenience. Your door looks odd when opened and you're scared that it may fall off. It's a hassle to try and close a sagging door because it won't latch properly unless you're lifting the door to fit it in just right.

How this system works:

A car door operates the same way that a house door does. It relies on a hinge that connects the door to the body of your car. When you pull on your door handle, the pin in the middle of the car door hinge rotates, the hinge unfolds like a book that is opening, and the car door opens easily. When the hinges are functioning properly, they not only allow you to open and close the car door with ease, but they hold the door open without letting it sag.

Common reasons for this to happen:

Two primary issues can cause a car door to sag:

  • Hinge pin and bushings are worn: The hinge pin and bushings are what allow the hinges to open up. The pin is the long cylinder in the middle of the hinge, and the bushings are on the top and bottom of the pin. These pieces rotate as you open and close the door. Over time, the pin and bushings can wear out. When this happens, they become loose within the hinge, and are no longer able to hold as sturdy as they once did, resulting in the car door sagging.

  • Damaged or loose door hinge: The hinge that allows the door to swing open and closed is attached to both the door and the car frame. The hinge is attached with large bolts. Like all bolts, these can become loose from time to time, which causes the hinge to become loose. When the hinge is loose, the weight of the door is too much for the hinge, and the door will sag. Even if the bolts are tight, the hinge itself can become bent or damaged in a way that prohibits it from holding the door as firmly as it should.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the cause of the sagging car door and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The door hinge is a relatively easy part of your vehicle for a mechanic to inspect. The mechanic will check out the hinge and see what part is damaged or loose. The mechanic will then either replace the part in question, or replace the entire hinge assembly. They’ll also check to make sure that no damage has been done to the door or the frame.

How important is this service?

A sagging car door is a nuisance. And it's a problem that will only get worse if you neglect it. It will sag more and more until it's impossible to close the door. Therefore, you should schedule an inspection sooner rather than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(24)

Rating Summary
18
2
1
0
3
18
2
1
0
3

Matthew

21 years of experience
22 reviews
Matthew
21 years of experience
Mercedes-Benz E420 V8-4.2L - Car is not starting - Glen Burnie, Maryland
Very informative and thorough in attempt to determine the mechanical issue although none was detected. Highly recommended.

Tien

23 years of experience
903 reviews
Tien
23 years of experience
Mercedes-Benz E420 V8-4.2L - Transmission Fluid Service - Berkeley, California
Prompt and competent.

Manuel

32 years of experience
582 reviews
Manuel
32 years of experience
Mercedes-Benz E420 V8-4.2L - Oil Change - Aliso Viejo, California
Very good experience!

Joshua

13 years of experience
19 reviews
Joshua
13 years of experience
Mercedes-Benz E420 V8-4.2L - Radiator - Antioch, California
Joshua was a trooper. Pooring down rain and was able to do the job within an hour and a half. very respectful and even got to the appointment 30 minutes early. I HIGHLY recommend Joshua for another job. Thank You and Happy Holidays

Excellent Rating

(24)

Rating Summary
18
2
1
0
3
18
2
1
0
3
Number of Mercedes-Benz E420 services completed
264+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Tie Rod End
Your Your vehicle's steering system is likely made up of a pinion and rack. Within this system are tie rods, which play a role in moving the tires on your car. These tie rods are found on both of the...
Symptoms of a Bad or Failing Brake Booster Vacuum Sensor
A failing brake booster vacuum sensor will cause the brake pedal to be stiff or turn on the Check Engine Light.
B1980 OBD-II Trouble Code: Bulb Outage Condition Detected
B1980 means there is a bulb outage condition in the vehicle, likely due to damaged wires, harnesses, or fuses in the system, or a bad bulb.

What are the uses of the ABS module?

Hello. Your car is equipped with wheel speed sensors (https://www.yourmechanic.com/services/wheel-speed-sensor-replacement) at each of the four wheels which monitor wheel speed while relaying this information constantly to the ABS and traction control system which are controlled by the car's ECU. When...

Engine light came on. Car drives slow and stopped going in reverse. Could it be a knock sensor or is it the transmission?

Hi there. If the vehicle is driving slow and will not go into reverse, then the computer could have the engine in limp mode due to either the transmission not shifting into reverse. If there was no signs of gear...

My 2006 Hyundai Sonata(3.3 v6 automatic) is whistling into drive and reverse hard(slams into gear) it goes much faster while in drive with no gas peddle then normal, ticking clacking and knocking sounds( mostly in valve area I believes. No vAcuum leaks. Is this a cracked flexplate? Brake pedal stiffens up in reverse as well.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com