Mercedes-Benz E280 Water Pump Replacement Costs

Car	Service	Estimate	Shop/Dealer Price
2007 Mercedes-Benz E280V6-3.0L	Service typeWater Pump Replacement	Estimate$763.30	Shop/Dealer Price$876.25 - $1181.06

Car

Service

Estimate

Shop/Dealer Price

2007 Mercedes-Benz E280V6-3.0L

Service typeWater Pump Replacement

Estimate$763.30

Shop/Dealer Price$876.25 - $1181.06

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
On a cold engine, the engine coolant is drained to a level below the water pump.
Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
The bolts holding the pump to the engine are removed and the pump is pulled out.
The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(41)

Rating Summary

SEE REVIEWS NEAR ME

Dameron

18 years of experience

273 reviews

Request Dameron

by Jeffrey

Mercedes-Benz CLK320 V6-3.2L - Water Pump - Indianapolis, Indiana

Being that I have an older (1999 Mercedes CLK) with a bad water pump, I must say I am very happy with the services provided. Although on rainy day, Dameron completed the repairs as promised in a timely fashion. Very meticulous and tidy with his work.

Scott

37 years of experience

995 reviews

Request Scott

by Romeo

Mercedes-Benz E320 V6-3.2L - Water Pump - Buckeye, Arizona

Came on time and did a great job !!!

Michael

22 years of experience

391 reviews

Request Michael

by Jacob

Mercedes-Benz CLK320 V6-3.2L - Water Pump - Rancho Cucamonga, California

Michael deserves a full 5 stars but giving him 4 stars for now and will upgrade it to 5 stars once he finishes the job. He was on time and friendly. He is smart, He had to replace the water pump which he did and he cleaned up the space after the work . So he was good. The reason for the 4 stars is he forgot to connect the coolant temperature sensor. So the fan was blowing high and the engine light came on and no reading on the coolant temp meter on the dashboard. But he scanned for codes and realized it was the temperature sensor. While connecting it he broke it but he still gets 4 stars because he admitted right away that he had broken it. He was upfront and honest instead of trying to cover it up and shift the blame, Speaks volumes about his character, He sad it would be replaced and fixed at no extra charge and he would come back and finish it after informing yourmechanic tomorrow as the office had closed. He will get his 5 stars once he finishes it. Yourmechanic has also been very good at resolving any issues on the work done and I expect that tomorrow when their office opens they will resolve it. So will give a 5 star rating when the job is completed. Hoping there are more upright and honest mechanics like Michael which is not easy to find,

Jason

33 years of experience

617 reviews

Request Jason

by JEAN

Mercedes-Benz CLK320 V6-3.2L - Water Pump - Sunnyvale, California

He was great!! Very patient. Very knowledgeable. I will 100% use him again

Mercedes-Benz E280 Water Pump Replacement at your home or office.

Estimate price near me

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Mercedes-Benz E280 Water Pump Replacement is $532 with $196 for parts and $336 for labor. Prices may vary depending on your location.

What is a water pump and how does it work?

When to consider replacing the water pump:

How do mechanics replace the water pump?

Is it safe to drive with a water pump problem?

When replacing the water pump keep in mind:

Meet some of our expert Mercedes-Benz mechanics

Excellent Rating

Rating Summary

Dameron

Scott

Michael

Jason

Excellent Rating

Rating Summary

Recent articles & questions

car cranks but wont start

Airbags were deployed. All airbags and damage have been replaced. How do I reset the computer? 2017 BMW X3

Car idles rough with AC on - 2008 dodge avenger

How can we help?