Mercedes-Benz CLS500 Car Starter Repair at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(42)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(42)

Car Starter Repair Service

How much does a Car Starter Repair cost?

On average, the cost for a Mercedes-Benz CLS500 Car Starter Repair is $410 with $242 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Mercedes-Benz CLS500V8-5.0LService typeCar Starter RepairEstimate$670.04Shop/Dealer Price$798.61 - $1167.31
Show example Mercedes-Benz CLS500 Car Starter Repair prices

What's a car starter motor and how does it work?

The starter motor is a powerful, compact electric motor that will turn a car’s engine over at about 200 RPM in order to start the engine. The starter is at the terminus of a circuit that includes the battery, the ignition switch, a neutral safety switch, relays and fuses.

When you turn the ignition key to start, or press the start button in some vehicles, the starter circuit is completed and the starter will run. Most starters have a small pinion gear that engages a larger ring gear on the flywheel when the starter is powered on. The pinion gear turns the engine flywheel at about 200 RPM. Since the flywheel is directly connected to the crankshaft, all engine components will then turn in sync and the engine starts.

Starter

When to replace the starter?

Starters are relatively durable but most will eventually fail in one or more of the following ways:

  • Intermittent operation of the starter. Starters can develop bad spots on the armature which will cause intermittent operation. This causes the starter to work sometimes and other times when you turn the key nothing happens.
  • Starter turns too slowly. Internal electrical and mechanical faults can cause the starter to draw too much current and in some cases the current drawn will exceed what the battery can supply. A consequence is the engine may not start as rapidly.
  • Unusual noises on starting. If you hear any type of grinding or other unusual noise while starting the engine, that should be investigated as the noise could reflect an internal starter failure or the noise could be due to pinion gear failure or flywheel ring gear damage.
  • Starter doesn’t function when turning the key. In some cases, the first symptom of a starter malfunction is a complete failure of the starter motor. This happens when you turn the ignition key to start the car, the starter motor does not function at all.

How do mechanics repair the starter?

  • If the starter is determined to be faulty, the battery must be disconnected prior to commencing any work. Once the battery is disconnected, the wiring to the starter is disconnected.
  • Starters are bolted to the engine block or the transmission case. Generally, there are two bolts. The procedure to access the starter varies across car models and can require removal, or lowering, of other vehicle components.
  • Once the starter is removed and a new starter is installed, the mounting bolts are tightened to the OEM factory torque specifications, the electrical connections are cleaned and re-attached to the starter and the starter is tested to confirm normal operation.

Is it safe to drive with a starter problem?

Once a vehicle engine is running, the starter is not in use. However, if you know that the starter is malfunctioning or working intermittently, you may be left stranded if you turn the engine off and the starter doesn’t function when restarting the engine. Should you know or suspect a problem with the starter, it is best to have the problem repaired to avoid being left stranded.

When replacing a faulty starter keep in mind:

  • Prior to replacing the starter, simple diagnostic tests should be performed to ensure that the problem is a faulty starter versus a weak battery, faulty neutral start switch, or other faulty electrical component in the starter motor circuit.
  • Starters draw large amounts of current from the battery, much more than any other electrically powered device in your car. This makes it important that the electrical connections to the battery are inspected, cleaned, and tightened as necessary. Cables to the starter should also be inspected for corrosion and replaced as needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(42)

Rating Summary
37
3
0
1
1
37
3
0
1
1

Ronald

42 years of experience
519 reviews
Ronald
42 years of experience
Mercedes-Benz CLS500 V8-5.0L - Starter - Spring, Texas
Very friendly

Rigoberto

12 years of experience
739 reviews
Rigoberto
12 years of experience
Mercedes-Benz CLS500 V8-5.0L - Air Filter - Chicago, Illinois
He was fantasic ...Great job...very good work.

MICHAEL

34 years of experience
184 reviews
MICHAEL
34 years of experience
Mercedes-Benz CLS500 V8-5.0L - Fuel Pump - Pineville, Pennsylvania
Great job! Knowledgable, friendly and efficient

William

35 years of experience
731 reviews
William
35 years of experience
Mercedes-Benz CLS500 V8-5.0L - Crankshaft Harmonic Balancer - Phoenix, Arizona
Great mechanic very savvy, job was completed successfully A+

Excellent Rating

(42)

Rating Summary
37
3
0
1
1
37
3
0
1
1
Number of Mercedes-Benz CLS500 services completed
462+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Connector Hose Heater Control Valve
If your car's AC stops being able to blow warm air and you find coolant leaks, you may need to replace the connector hose heater control valve.
Symptoms of a Bad or Failing Surge Tank Hose
Common signs include leaking radiator coolant under the right side of the car, swelling in the hose, engine overheating, and a damaged hose.
P0932 OBD-II Trouble Code: Hydraulic Pressure Sensor Circuit
P0932 means there is a circuit malfunction in the hydraulic pressure sensor, likely due to faulty electrical components or a defective sensor.

Oil light came on & car stalled

If your engine loses oil pressure or the oil pressure sending unit fails for some reason, such as a bad sensor or wiring connection to the sender the engine control module, this will shut down the engine and not allow...

Intermittent issue where after a stop car is stuck in first, speedometer at zero. Had output speed sensor changed, no change.

Hello there, a few possible faults could cause the vehicle to become stuck in first. The most common would be low fluid level, shift solenoid, transmission range sensor, or a transmission mechanical fault. I'd suggest getting this looked at by...

Clunking noise and jolting when put in reverse

Many different faults can cause the vehicle to clunk and not be able able to shift out of gear. Transmissions use the fluid to help change gears, and when fluid is low or dirty, it can cause many issues with...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com