Mercedes-Benz CL63 AMG Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,730)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,730)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Mercedes-Benz CL63 AMG Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Mercedes-Benz CL63 AMGV8-5.5L TurboService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$139.99 - $158.75
2008 Mercedes-Benz CL63 AMGV8-6.3LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$120.04 - $138.82
2011 Mercedes-Benz CL63 AMGV8-5.5L TurboService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$120.03 - $138.82
2009 Mercedes-Benz CL63 AMGV8-6.3LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$119.98 - $138.72
2014 Mercedes-Benz CL63 AMGV8-5.5L TurboService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$120.07 - $138.89
2012 Mercedes-Benz CL63 AMGV8-5.5L TurboService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$120.03 - $138.82
2010 Mercedes-Benz CL63 AMGV8-6.3LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$124.69 - $143.22
Show example Mercedes-Benz CL63 AMG Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

Dana

25 years of experience
13 reviews
Dana
25 years of experience
Mercedes-Benz CL63 AMG V8-5.5L Turbo - Oil Change - Fairfax, Virginia
Job well done .

David

13 years of experience
424 reviews
David
13 years of experience
Mercedes-Benz CL63 AMG V8-6.3L - Battery - Marietta, Georgia
Right on time. Great service.

Jermaine

24 years of experience
270 reviews
Jermaine
24 years of experience
Mercedes-Benz CL63 AMG V8-5.5L Turbo - Oil Change - Greenbelt, Maryland
Good Job .

Charles

34 years of experience
342 reviews
Charles
34 years of experience
Mercedes-Benz C300 V6-3.0L - circuit board for right rear tail light - Austin, Texas
Charles was very professional and completed the service in half the estimated time!

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0212 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 12
P0212 P0212 code definition Injector Circuit Malfunction - Cylinder 12 What the P212 code means P0212 is telling us the Engine Control Module (ECM) has detected a fault within the cylinder 12 fuel injector circuit. This code is specifically set...
How to Find and Purchase a Classic Citroen
With many firsts to its name, including the world's first mass-produced front-wheel drive car, the French automobile manufacturer PSA Peugeot Citroen group began manufacturing its Citroen line of vehicles in 1919. Finding classic Citroen cars is much easier when you...
How to Replace Transmission Fluid
Whether Whether you have a manual or an automatic transmission in your vehicle, the transmission fluid (https://www.yourmechanic.com/article/what-is-transmission-fluid-and-what-does-it-do) is one of the most overlooked fluids when it comes to maintenance. Forgetting to change this fluid (https://www.yourmechanic.com/article/how-long-does-transmission-fluid-last) can result in some serious...

Steering wheel shakes when braking

Hi there. If the steering wheel shakes when hitting the brakes, then you are right, it does have warped rotors. If the rotors on this large of a vehicle are that warped then the rotors should be replaced (https://www.yourmechanic.com/services/brake-rotor-disc-replacement) to...

Changing transmission fluid in 2005 Hyundai Sonata Common repairs on Hyundai Sonata

You've only got 40,000 miles on it and it's 2005--it's old. So, I'd say change the fluid and filter and use the factory fluid. Because the most common problem on those cars are bad transmissions, you don't want to chance...

Just had timing chain replaced on 2012 qx56 and they called" -- dealer called and said while fixing the timing belt that my ac pum

Hi there. It does seem kind of suspicious that your vehicle went in with ac and now it doesn't work. I completely understand how you feel and hope to help you fix this. However, component failure can happen at any...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com