Mercedes-Benz B250 Car is slow to accelerate Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,730)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,730)

Car is slow to accelerate Inspection Service

How much does a Car is slow to accelerate Inspection cost?

On average, the cost for a Mercedes-Benz B250 Car is slow to accelerate Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Mercedes-Benz B250L4-2.0L TurboService typeCar is slow to accelerate InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2018 Mercedes-Benz B250L4-2.0L TurboService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2019 Mercedes-Benz B250L4-2.0L TurboService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Mercedes-Benz B250L4-2.0L TurboService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2015 Mercedes-Benz B250L4-2.0L TurboService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2017 Mercedes-Benz B250L4-2.0L TurboService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Mercedes-Benz B250L4-2.0L TurboService typeCar is slow to accelerate InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
Show example Mercedes-Benz B250 Car is slow to accelerate Inspection prices

A car that is getting fuel and is properly tuned should take off quickly when the accelerator is pressed. A vehicle that is sluggish or slow to accelerate can be dangerous, especially at intersections and on-ramps.

Modern cars have a very complex system that delivers fuel to the engine and rids of the vehicle of exhaust gases. A failure in any part of this system can lead to a car that is slow to accelerate. In the majority of cases, the problem can be traced back to the fuel system.

A vehicle that is slow to accelerate should be repaired immediately as it can be dangerous to drive.

How this system works:

The fuel system is responsible for supplying fuel to the engine. Fuel is mixed with air, atomized and vaporized in the intake system, which provides power to drive the pistons of the engine. There are a variety of different fuel system types but most of them have the same basic parts.

The fuel tank stores the gasoline. Fuel is pulled through the fuel lines by the fuel pump and is fed into the fuel injectors. Older cars have a carburetor and throttle body injectors instead of fuel injectors. The fuel injectors spray gasoline into the cylinders where it is mixed with air and then ignites during the compression stage. The result is an explosion that moves the pistons.

Common reasons for this to happen:

  • Bad or Clogged Fuel Injector: Fuel injectors can become clogged due to contaminates in the fuel. Fuel injectors, by their very nature, must be very precise in controlling the amount of fuel that goes into the combustion chamber so they have very small passages that deliver the fuel. Over time these tiny passages will become clogged which impedes the delivery of fuel.

When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly or feel that it does not have enough power. Other symptoms include a rough idle, a vehicle that is hard to start and a decrease in fuel efficiency.

  • Defective Fuel Pump: The fuel pump pulls the fuel from the gas tank to the engine via the fuel lines. If the pump stops working, malfunctions, or becomes clogged, it will not supply enough fuel to the injectors. This can cause the vehicle to accelerate slowly, or even sputter and stall, especially at high speeds.

  • Clogged Fuel Filter: The job of the fuel filter is to filter out containments in the fuel and if it becomes clogged it can restrict the amount of fuel that reaches the injectors. This can cause a vehicle to accelerate slowly. Fuel filters are designed to be replaced on a regular basis.

  • Dirty Airflow Sensor: This part detects the mass of air that enters the fuel injection system and hands that information off to the engines’ computer which allows the computer to deliver the proper amount of fuel to the air. These sensors can become dirty or malfunction over time, which results in the wrong data being sent to the computer. A slow accelerating car is the result of this incorrect data. It may also trigger the Check Engine light.

  • Leaking Fuel Line: A leak in the fuel line will drain off enough fuel that it leaves a shortage for the injectors. This not only affects the performance of the car but will also create a dangerous situation. If you smell gasoline in the vicinity of the car or see a puddle of fuel underneath the vehicle, the car should be inspected and repaired immediately.

  • Vacuum Leak: A leak in the vacuum system can affect the ability of the car’s computer system to properly regulate the fuel to air ratio. One of the major symptoms of a vacuum leak is a car that is slow to accelerate or feels like it has a lack of power. In addition the check engine light will probably illuminate.

  • Failing Catalytic Converter: A failing or clogged catalytic converter will prevent the proper amount of air from going into the engine. In most cases the vehicle will run hotter than normal, will accelerate slowly and feel like there is a loss of power. Issues with the catalytic converter tend to be fairly expensive repairs.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the car is slow to accelerate issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car's fuel system for leaks and any defective parts. This includes fuel injectors, fuel pump, fuel filter, airflow sensors and other important components related to the vehicle's slow acceleration. It may be necessary to test drive the car in order to verify the acceleration issue and provide an accurate diagnosis.

How important is this service?

A car that accelerates slowly is a dangerous vehicle to drive, especially at intersections and on ramps. Failing to fix simple fuel system problems will often lead to a more expensive repair down the road and eventually a car that may not run at all. A slow accelerating car should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

Maxwell

18 years of experience
390 reviews
Maxwell
18 years of experience
Mercedes-Benz GL450 V8-4.6L - Car is slow to accelerate - Cypress, Texas
Awesome! Very knowledgable, patient and helpful.

Robert

31 years of experience
641 reviews
Robert
31 years of experience
Mercedes-Benz GL450 V8-4.6L - Car is slow to accelerate Inspection - San Jose, California
Robert was a really honest and knowledgeable mechanic. When I requested the inspection I was really dreading the cost of the repairs and since luxury brands usually come with high maintenance costs I thought for sure it would be a costly repair. Fortunately, Robert was able to solve my problem in less than 30 minutes. He didn't try to add additional services or repairs which is honestly more than I can say for most shops out there. Excellent overall experience with Robert and YourMechanic.

Rigoberto

11 years of experience
739 reviews
Rigoberto
11 years of experience
Mercedes-Benz 450SLC V8-4.5L - Car is slow to accelerate - Bensenville, Illinois
good

Joe

23 years of experience
85 reviews
Joe
23 years of experience
Mercedes-Benz 300SE L6-3.0L - Alternator - Mansfield, Texas
Excellent work and very personable.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Can I Prepare For an Emissions Test?
Annual Annual emissions testing is required in order to ensure that your car is not producing too much pollution and that your emissions control components are in working order. While not all areas of the US require emissions testing yet,...
4 Essential Things to Know About Your Car’s Muffler
The The muffler on a vehicle is designed to reduce the amount of noise coming from the exhaust system of your automobile. The muffler quiets the sound pressure that the engine creates by using acoustic quieting, which means the muffler...
5 Essential Things to Know About Driver's Education
Driver’s Driver’s education is an important consideration for many teens who are edging closer to that magical time when they become licensed drivers. However, before all the unbridled freedom and power of driving become yours, there are a few essential...

Motor idles fine, when you give it gas it bogged down, already changed the plugs,wires,distributor cap and rotor

Hi there, thanks for writing in about your Chevrolet C1500. It's highly likely the mass airflow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) is bad. To verify, a scan tool should be connected and observe voltage changes in the mass airflow sensor readings. Same for...

I just replaced my brake master cylinder and the brakes still feel soft. What do I need to do after I replace the master cylinder

From what you've described you will have to bleed your brakes (https://www.yourmechanic.com/article/what-does-it-mean-to-bleed-your-brakes). Also, I believe you may have a leak (https://www.yourmechanic.com/services/brake-fluid-is-leaking-inspection) in one of the lines. You may want to use a wrench and tighten the lines a little more....

clutch pedal has no free play

If the clutch pedal is hard to push or stiff the most likely cause is a problem with the pedal linkage or the clutch cable (if mechanical clutch versus hydraulic). If the fault is not found there, the other common...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com