Mercedes-Benz B200 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Mercedes-Benz B200 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Mercedes-Benz B200L4-2.0L TurboService typeWindows InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2006 Mercedes-Benz B200L4-2.0L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2011 Mercedes-Benz B200L4-2.0L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2009 Mercedes-Benz B200L4-2.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2010 Mercedes-Benz B200L4-2.0L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2006 Mercedes-Benz B200L4-2.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2010 Mercedes-Benz B200L4-2.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2011 Mercedes-Benz B200L4-2.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Mercedes-Benz B200 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Theodore

16 years of experience
1592 reviews
Theodore
16 years of experience
Mercedes-Benz 500SEL V8-5.0L - Windows - Seattle, Washington
Excellent service from Theo Arrived on time Explained what he was doing Finished up with review of what he did and anything that needed to be done

Leslie

14 years of experience
81 reviews
Leslie
14 years of experience
Mercedes-Benz C230 L4-1.8L Turbo - Windows - Media, Pennsylvania
On time, knowledgeable, and efficient..

Augie

31 years of experience
263 reviews
Augie
31 years of experience
Mercedes-Benz GLK350 V6-3.5L - Windows - Palmdale, California
Thank you much..

Theodore

16 years of experience
1592 reviews
Theodore
16 years of experience
Mercedes-Benz 500SEL V8-5.0L - Windows - Seattle, Washington
Theodore was excellent! He was on time and did what he said. He even worked through a hailstorm!!

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Mercedes-Benz Windows Inspection services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in Vermont
Motorists Motorists share the road with other vehicles and pedestrians, and often it is difficult to determine who should proceed first, and who should wait. That is why right-of-way laws are in place – to ensure that traffic moves efficiently,...
How to Get Ram Dealership Certified
Ram car dealerships offer automotive technician jobs to mechanics who are Ram certified through the MOPAR College Automotive Program.
How to Replace a Transmission Oil Pressure Switch
A transmission oil pressure switch relays measurements from the pump. If the filter is clogged, this switch puts the transmission into limp mode.

The truck cannot be started, u1000 code

The code is for lost communication with the ECM's data lines. Try to loosen and retighten the ECM connector ground and the battery negative cable ground to the body. Clean and check both these connections and clear codes and see...

Throttle position sensor - loose connection? 2012 Ford Fusion

Hello - yes, it is possible that the electrical connector for the throttle position sensor (https://www.yourmechanic.com/question/when-i-press-on-gas-pedal-it-s-not-accelerating-by-carl-p) has a loose or poor connection. It is more likely that the throttle position sensor is failing. It has redundant circuitry, which accounts for...

How much is the labor and parts for a 2008 Buick Enclave for engine power reduce

Hi Willie. Thanks for contacting us today. The reduced engine power light is a warning system that indicates a problem with a vehicle system, such as a throttle body, throttle position sensor or other components. Since there are multiple possible...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com