Mercedes-Benz AMG GT Black Series Loud noises when car is put in gear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,730)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,730)

Loud noises when car is put in gear Inspection Service

How much does a Loud noises when car is put in gear Inspection cost?

On average, the cost for a Mercedes-Benz AMG GT Black Series Loud noises when car is put in gear Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
* Mercedes-Benz AMG GT Black SeriesV8-4.0L TurboService typeLoud noises when car is put in gear InspectionEstimate$124.99Shop/Dealer Price$139.69 - $150.72
2021 Mercedes-Benz AMG GT Black SeriesV8-4.0L TurboService typeLoud noises when car is put in gear InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
* Mercedes-Benz AMG GT Black SeriesV8-4.0L TurboService typeLoud noises when car is put in gear InspectionEstimate$104.99Shop/Dealer Price$119.72 - $130.77
* Mercedes-Benz AMG GT Black SeriesV8-4.0L TurboService typeLoud noises when car is put in gear InspectionEstimate$104.99Shop/Dealer Price$119.68 - $130.70
Show example Mercedes-Benz AMG GT Black Series Loud noises when car is put in gear Inspection prices

When you put your car in gear, there should be minimal noise. The transmission should engage easily, and you should be able to drive without any effort. If you’re hearing loud noises when the car is put in gear, it could be one of several different problems depending on the type of noise in question and when exactly you’re hearing it. It may not even be related to the transmission.

How this system works:

When you put your car in gear, it puts a load on both the engine and the transmission. When you press the gas, that load changes. For this reason, engines and transmissions have mounts. These mounts cushion, support and secure both the engine and transmission, ensuring that the loading doesn’t translate into loud clunks, thunks, bangs and other abnormal sounds.

In addition, a number of things must happen when you put your car in gear (these will vary drastically depending on whether you’re driving a car with a manual or an automatic transmission). For instance, with a manual transmission, you must press in the clutch pedal, which engages the clutch and allows you to shift gears. If the clutch is worn, you may hear a grinding or screeching sound here.

In an automatic transmission, things work a little differently. There are clutch plates throughout, as well as bands that connect each gear. If either the clutch plates or the bands have suffered wear, it’s possible you’ll hear noises when the transmission changes gears.

Common reasons for this to happen:

  • Low Transmission Fluid: The most common reason for any transmission-related problem is low fluid. Your transmission requires the right amount of fluid to operate, and to protect internal components from wear and tear, heat and friction.

  • Failed Motor Mount: Another common cause of hearing a noise when putting your car into gear is a failed motor mount. Different makes and models use different types of mounts. Some are little more than rubber blocks, while others are hydraulic units. In either instance, a failed mount (or a missing motor mount bolt) will create a very loud noise when you put your car in gear.

  • Failing U-Joint: If you have a rear-wheel drive vehicle, the problem might not be with the engine or transmission, but with the drive shaft. A bad U-joint can cause a very loud sound when putting the car into gear. Play in the joint allows the shaft to flex incorrectly, causing noises and vibrations.

  • Worn Clutch: If you have a manual transmission, it’s possible that the clutch is worn out. This would make a screeching/grinding noise when attempting to put the car in gear.

  • Failing Pilot Bearing: This problem is only pertinent to manual transmissions, and only when engaging the clutch (pressing the clutch pedal in).

  • Failing Throw Out Bearing: If you hear a noise from your manual transmission when releasing the clutch, it could be a failed throw out bearing.

What to expect:

A professional mobile mechanic will visit your home or office to inspect the noise your car is making when putting it into gear. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to crank the car, and then put it in gear to verify and duplicate the noise. Based on this test, the mechanic will either have a diagnosis, or will need to inspect other components of the vehicle to verify their condition and operation. The actual steps taken will depend on the type of noise you’re hearing.

How important is this service?

Unusual noises when putting your car in gear should always be cause for alarm. It might be something relatively simple like a failed U-joint, but it might be a sign of transmission damage, or a failed motor mount, both of which are serious problems. One of our professional mechanics can diagnose and repair the problem for you.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

AUDIE

33 years of experience
191 reviews
AUDIE
33 years of experience
Mercedes-Benz GLK350 V6-3.5L - Loud noises when car is put in gear - Las Vegas, Nevada
Very Profesional Highly ethical Very honest

Curtis

29 years of experience
163 reviews
Curtis
29 years of experience
Mercedes-Benz S550 V8-5.5L - Coolant Reservoir - Columbia, South Carolina
Curtis was a great and friendly mechanic. He was also extremely fast too!!

Maxwell

18 years of experience
390 reviews
Maxwell
18 years of experience
Mercedes-Benz C230 V6-2.5L - Canister Purge Solenoid - Spring, Texas
Maxwells is very knowledgeable about his job. He’s very easy to work with an a great talker lol.

Ronald

41 years of experience
357 reviews
Ronald
41 years of experience
Mercedes-Benz GLK350 V6-3.5L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Cypress, Texas
He started a couple of days late because the needed part was delayed coming in, but once he started i was great work all the way. Ronald even worked through a rain storm

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Are Rear Windshield Wipers Legally Required?
Some Some vehicles, particularly hatchbacks and sport utility vehicles, are equipped with a rear wiper assembly. The rear wiper performs the same function as the front windshield wiper: to clear the glass when rain, snow, or dirt build up on...
How to Buy a New Car Below Sticker Price
When When you buy a new car from the car dealership, you want to get a better deal than they have advertised or displayed on the car, but negotiation isn’t a strong suit for every person. There are several ways...
How to Pressure Test a Radiator Cap
Radiator caps are pressure tested using a cooling system pressure tester. This shows if the pressure in the cooling system is at a healthy level.

Dead animal inside vents of vehicle.

I have seen a family of mice make a home inside the heater blower case. You may need to have the entire heater blower case removed, thoroughly cleaned out, and sanitized (https://www.yourmechanic.com/services/ac-is-not-working-inspection). This may be the only way to remove...

I replaced the lower ball joint, but when I try to tighten the nut, the ball joint stud just turns

A lot of times, when you're installing a ball joint (https://www.yourmechanic.com/services/ball-joint-front-replacement) into the lower control arm and trying to tighten the nut to lock in the ball joint shaft, the shaft will spin if you do not have enough pressure...

Replaced E38 computer on 2006 Pontiac g6. Should I try it out or does it need programming first?

The computer (ECM) will need programmed to the VIN of your vehicle before attempting to operate the vehicle. If you need further assistance with programming your computer, then seek out a professional, such as one from Your Mechanic, to help...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com