Mercedes-Benz 600SL Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,730)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,730)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Mercedes-Benz 600SL Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Mercedes-Benz 600SLV12-6.0LService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
Show example Mercedes-Benz 600SL Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

Mike

16 years of experience
17 reviews
Mike
16 years of experience
Mercedes-Benz 600SL V12-6.0L - Pre-purchase Car Inspection - Las Vegas, Nevada
Mike was on point and provided honest feedback on a pre purchase car inspection. Thank you Mike!

Theodore

16 years of experience
1638 reviews
Theodore
16 years of experience
Mercedes-Benz GL450 V8-4.6L - Starter - Seattle, Washington
Theo goes the extra miles to get the job done. No matter how long it takes him to finish the repair. He fixes it right the first time. He is my go to mechanic for all my car repairs.

Andrew

14 years of experience
113 reviews
Andrew
14 years of experience
Mercedes-Benz C300 V6-3.5L - Car is not starting - Puyallup, Washington
Showed up on time and was very friendly and professional. Got my vehicle up and running in no time. Would definitely use his services again and highly recommend him to anyone needing a mechanic.

Martin

23 years of experience
68 reviews
Martin
23 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Variable Valve Timing (VVT) Solenoid - Houston, Texas
Excellent mechanic. Very knowledgeable and efficient

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Get the Best Fuel Economy in Hot Weather
Let’s Let’s face it: fuel prices continually bob up and down, but gas is never cheap. There are many factors that can affect how much fuel your vehicle uses, which directly affects your pocketbook. With the advent of warmer weather,...
2012 Jeep Grand Cherokee vs. 2012 Dodge Durango: Which One Should I Buy?
Medium to large SUVs are a fun class of vehicles: plenty large enough for moving people around, but if you really want to get out there in the mud and have some fun, they are still good for that type...
What Does the Dirty Air Filter Warning Light Mean?
The dirty air filter warning light turns on when their is reduced airflow to the engine, which affects your car's gas mileage and performance.

My engine is knocking

When your car begins to knock due to a lack of oil, this could mean many different things, such as broken or bent valves, a bad camshaft, rod or main bearings (https://www.yourmechanic.com/services/center-support-bearing-replacement), and many other different things. As you may...

My clutch has full pressure but won't go into gear the gear arms are making noise to

You need to do a visual inspection of the clutch arm while the pedal is pressed. Be sure the car is secure while you are doing this. If the clutch arm is moving through it's full travel, then your problem...

New plugs and new battery but it won't turn over

Hi Diamond. Thanks for contacting us today - and our first for 2018! If you turn the key of your Mazda and the starter will not engage, but you have power to accessories like lights, radio and such, then the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com