Mercedes-Benz 420SEL Brake Vacuum Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18)

Brake Vacuum Pump Replacement Service

How much does a Brake Vacuum Pump Replacement cost?

On average, the cost for a Mercedes-Benz 420SEL Brake Vacuum Pump Replacement is $492 with $321 for parts and $171 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1987 Mercedes-Benz 420SELV8-4.2LService typeBrake Vacuum Pump ReplacementEstimate$848.22Shop/Dealer Price$1040.04 - $1544.60
1988 Mercedes-Benz 420SELV8-4.2LService typeBrake Vacuum Pump ReplacementEstimate$812.22Shop/Dealer Price$1004.09 - $1508.69
1989 Mercedes-Benz 420SELV8-4.2LService typeBrake Vacuum Pump ReplacementEstimate$831.22Shop/Dealer Price$1026.59 - $1533.82
1986 Mercedes-Benz 420SELV8-4.2LService typeBrake Vacuum Pump ReplacementEstimate$812.22Shop/Dealer Price$1004.02 - $1508.56
1991 Mercedes-Benz 420SELV8-4.2LService typeBrake Vacuum Pump ReplacementEstimate$812.22Shop/Dealer Price$1004.14 - $1508.77
1990 Mercedes-Benz 420SELV8-4.2LService typeBrake Vacuum Pump ReplacementEstimate$812.22Shop/Dealer Price$1004.09 - $1508.68
Show example Mercedes-Benz 420SEL Brake Vacuum Pump Replacement prices

What is the Brake Vacuum Pump all about?

The brake booster is a device that helps enhance the effects of the hydraulic braking system in cars as a supplement to the primary braking mechanism. Each time you push the brake pedal, the force transfers to a rod. This rod passes through the brake booster and reaches the master cylinder. The pressure from the rod activates the master cylinder piston and works on the hydraulic braking systems.

The brake booster chamber contains a vacuum the engine creates. This chamber has two sections, separated vertically by way of a rubber diaphragm. When the brake pedal pushes the rod, a small amount of air is let into the chamber on the brake pedal side through a valve that also seals off the vacuum. This air pressure on one side of the diaphragm helps enhance the force of the brake.

However, in case of cars that have turbo charging or use diesel as fuel, the engine does not create the necessary vacuum. Thus, they need an additional brake booster vacuum pump to draw out the air and create the vacuum needed for the brake booster to function. Vehicles that typically run in locations of high altitude also need a brake booster vacuum pump.

The brake booster vacuum pump reduces dependency on the engine for the vacuum and can work independently of it. This device uses an electrical control circuit to work. It activates with a signal from the brake booster vacuum sensor that monitors the levels of the vacuum in the brake booster.

Keep in mind:

  • The brake booster vacuum pump should be able to maintain up to 18” of vacuum for the brake booster to be effective.
  • If you notice that the pedal has slipped to the floor of the car and you hear a hissing sound, this could be an indication of a leak in the air line or pump to the brake booster vacuum pump.

How it's done:

  • The battery is disconnected. The faulty brake booster vacuum pump is located and identified. The vehicle is raised and supported on jack stands as needed. The engine under shield is removed for access.

  • The brake booster vacuum pump hoses and electrical connector are disconnected. The brake booster vacuum pump is removed from the mounting bracket.

  • The new brake booster vacuum pump is installed onto the mounting bracket. The hoses and electrical connector are installed to the new brake booster vacuum pump. The battery is reconnected.

  • The brakes are tested for proper brake booster vacuum pump operation. The engine shield is reinstalled. The vehicle is removed from the jack stands.

  • The vehicle is road tested and checked for proper brake booster vacuum pump and brakes operation.

Our recommendation:

If you notice the brakes are not responding as they should, book an appointment with one of our expert mechanics and have the brake booster system completely inspected. The mechanic will check the brake booster vacuum pump for damage and advise you if it needs replacing. Refer to the owner’s manual for recommendations on the frequency in which you must have the brake booster vacuum pump replaced.

What common symptoms indicate you may need to replace the Brake Vacuum Pump?

  • Delayed brake response
  • Excessive pressure is needed to make the brake respond
  • A hissing sound when you press the brake pedal
  • Brake pedal slips to the floor of the car when the engine is running and the car is stationary
  • Braking becomes especially difficult in heavy traffic areas when the brakes need to be applied in quick succession

How important is this service?

A malfunctioning brake booster vacuum pump will not create the adequate vacuum needed for the brake boosters or power brakes to function. This undermines the effectiveness of your brakes and can be a safety hazard.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(18)

Rating Summary
17
0
0
1
0
17
0
0
1
0

Tien

23 years of experience
903 reviews
Tien
23 years of experience
Mercedes-Benz 420SEL V8-4.2L - Power Window Switch Replacement (Passenger Side Front, Passenger Side Rear) - Oakland, California
Tiens was very nice to work with. He fixed 2 things and ordered parts for other items.

Dave

23 years of experience
303 reviews
Dave
23 years of experience
Mercedes-Benz 420SEL V8-4.2L - Oil Change - San Jose, California

Carlos

28 years of experience
516 reviews
Carlos
28 years of experience
Mercedes-Benz 420SEL V8-4.2L - Serpentine/Drive Belt - Ontario, California
Carlos came on time (unlike others who cancelled the appointment several times). He came, TWICE because of my car needed more parts than expected. Great job, friendly, very professional, I HIGHLY recommend him, and will make sure next time - if needed - he will be the one I ask for. Thank you Carlos

Marco

29 years of experience
229 reviews
Marco
29 years of experience
Mercedes-Benz 420SEL V8-4.2L - Neutral Safety Switch - Riverside, California
A life-saver

Excellent Rating

(18)

Rating Summary
17
0
0
1
0
17
0
0
1
0
Number of Mercedes-Benz 420SEL services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Fuel Injector
Getting Getting fuel directly to an engine is accomplished through an electronic fuel injector; with each cylinder getting its own dose of fuel which is much more efficient than the ways carburetors would send fuel directly to the engine in...
How to Prepare for the Washington Driver’s Written Test
If If you are going to be getting your license in the near future, you will first have to take and pass the Washington driver’s written test. This test is used to ascertain whether you have the knowledge of the...
How to Keep Your Car Safe When It’s Parked
It’s It’s reasonable to worry about your car when you park it in a foreign place, especially if that place doesn’t seem particularly friendly. Sometimes the thought of leaving a car in a vulnerable situation hinders us completely. But learning...

Sliding door not closing.

The door is on a track and on rollers in that track. If the track is blocked or the rollers are broke could bind the door. The door has several safety items that cannot tell the difference between someone in...

Whining noise, parts keep going out

Hello. If the air compressor is faulty (https://www.yourmechanic.com/services/ac-compressor-replacement) this will cause the engine to work harder and that may result in lower mpg. The whining noise (https://www.yourmechanic.com/services/car-is-making-a-noise-inspection) could be caused by a bad serpentine belt (https://www.yourmechanic.com/services/serpentine-drive-belt-replacement), pulley (https://www.yourmechanic.com/services/idler-pulley-replacement), or a...

I do not know what TPS I should get to improve my ACDelco one for the Formula SAE team I am on. I am a student at Cal Poly Pomona.

If you are getting erratic signals from the TPS then you should replace it with same one. You will need to be careful not to spray any liquid into the throttle body or it will get into the sensor and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com