Mercedes-Benz 400SE Parking brake won't engage Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,716)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,716)

Parking brake won't engage Inspection Service

How much does a Parking brake won't engage Inspection cost?

On average, the cost for a Mercedes-Benz 400SE Parking brake won't engage Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Mercedes-Benz 400SEV8-4.2LService typeParking brake won't engage InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
Show example Mercedes-Benz 400SE Parking brake won't engage Inspection prices

Engaging your parking brake ensures that your car doesn’t roll when you park on a hill. This is important in a wide variety of situations, whether you’re parking at home and your driveway is angled, or you’re backing down a boat ramp to unload in the lake. If your parking brake won’t engage, then you’re relying solely on the transmission’s park setting to hold the vehicle in place, which is never a good thing. It could slip, and it could also cause damage to the transmission.

How this system works:

Most parking brakes are relatively simple affairs – really nothing more than a cable that attaches to the handle that sits between your front seats (or the parking brake pedal under the dash in some cars). Pulling the handle pulls the cable, which engages the parking brake assembly and pushes a pair of brake shoes into contact with the inside of the drum.

However, despite that simplicity, there are several things that could go wrong with your parking brake. The most common issue is simply that you need to adjust your brake shoes. However, there could be a problem with the cable (corrosion or wear, for instance), or there could be a problem with the handle itself, although this is rare.

Common reasons for this to happen:

  • Need to Adjust Brake Shoes: The single most common reason your parking brake won’t engage is a need to adjust the brake shoes. This requires removing the rear wheels, removing the drum, and then adjusting the wheel to spread the shoes apart. Both sides should be adjusted.

  • Cable Is Detached: Another potential reason here is that the cable may have come loose from one or both sides. The cable must attach to both rear brakes for your parking brake to work (if it attaches to just one side, the brake will engage but feel loose, and the car will roll on a hill).

  • Cable Is Loose at the Handle: A much less common problem is that the nut where the cable attaches under the handle is loose. If this happens, there will be slack in the cable, and pulling the handle will not engage the parking brake. This is most common after inexpert parking brake repairs.

  • Rusted Bell Crank: The bell crank is really nothing more than a lever that sits near the front of the parking brake assembly. These are prone to rusting, particularly if you don’t use your parking brake very often. If this is the case, your parking brake will not engage.

What to expect:

One of our experienced mobile mechanics will come to your home or office and inspect the entire parking brake system, from the handle to the bell crank, the cabling and the attachment points at the rear. The mechanic will also provide you with a full report that details the scope and cost of any necessary parts and repairs.

How it's done:

The mechanic will inspect all aspects of your parking brake, beginning with the handle or pedal in the cabin. The mechanic will also inspect the cables, the shoe condition and adjustment and other aspects of your parking brake system. It may be necessary to remove one or both rear wheels, as well as the brake drums (if your car has drum brakes). If your car has disc brakes, the caliper and rotor may need to be removed to inspect the parking brake shoes, which are located inside the built-in drum on the rotor itself.

How important is this service?

If your parking brake will not engage, it will not prevent you from driving, but it does make parking on an incline risky. It’s possible that the transmission will slip out of park, and the vehicle will roll down the slope. One of our mechanics can fully assess your parking brake and advise you on what is needed to repair it.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,716)

Rating Summary
5,320
192
54
29
121
5,320
192
54
29
121

Clifton

30 years of experience
289 reviews
Clifton
30 years of experience
Mercedes-Benz CLK350 V6-3.5L - Serpentine/Drive Belt - Boca Raton, Florida
Accommodating and very professional

Jamahl

20 years of experience
830 reviews
Jamahl
20 years of experience
Mercedes-Benz ML350 V6-3.5L - Brake System Flush - Orlando, Florida
I definitely recommend hiring Jamahl for any of your projects. He is a professional and is considerate in getting the problem fixed.

Jimmi

27 years of experience
261 reviews
Jimmi
27 years of experience
Mercedes-Benz C230 V6-2.5L - Car is making a noise - Orlando, Florida
Professional experience.

Robert

37 years of experience
237 reviews
Robert
37 years of experience
Mercedes-Benz E350 V6-3.5L - Car is shaking or vibrating - McDonough, Georgia
Robert was great! I will use him again.

Excellent Rating

(5,716)

Rating Summary
5,320
192
54
29
121
5,320
192
54
29
121
Number of Mercedes-Benz services completed
62876+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Fuel Return Hose Last?
Most Most of the older cars on the market have a carburetor that helps to disperse the fuel that is need during the combustion process. While these carburetors are very reliable, there are a number of repair issues that can...
P0481 OBD-II Trouble Code: Cooling Fan 2 Control Circuit Malfunction
P0481 means a problem with the control circuit for cooling fan 2. Some causes are faulty cooling fan or damage to the wire connecting the cooling fan.
P0736 OBD-II Trouble Code: Reverse Incorrect Gear Ratio
P0736 code means the PCM has detected an abnormality in the ratio of a particular gear often due too a faulty shift solenoid or dirty fluids.

What do I do if the Check Fuel Cap message appears?

Your car is equipped with a pretty sophisticated evap/emissions system that monitors the level of pressure in the gas tank. This is done to detect possible leaks, including a loose gas cap. If you’ve left the cap loose (or off),...

Want to pass emissions testing, but I have a P0400 code for my vehicle. 2000 Nissan Altima

Hi there - the P0400 (https://www.yourmechanic.com/article/p0400-obd-ii-trouble-code-exhaust-gas-recirculation-flow-malfunction-by-jay-safford) code you have suggests a problem with the Exhaust Gas Recirculation system of your car. Given your mileage, this malfunction could be a clogged EGR valve or tube, solenoid or leaking exhaust gas tube....

Car randomly died while driving, initially tried to turn over but now no power at all, scanner not piling up any codes.

Hi there. There could be an issue with the battery or the electrical system for the vehicle to stall out randomly. Check the battery for any loose connections and to see if the battery is fully charged. If there is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com