Mercedes-Benz 350SDL Car idle is rough Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(13)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(13)

Car idle is rough Inspection Service

How much does a Car idle is rough Inspection cost?

On average, the cost for a Mercedes-Benz 350SDL Car idle is rough Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Mercedes-Benz 350SDLL6-3.4L Turbo DieselService typeCar idle is rough InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1991 Mercedes-Benz 350SDLL6-3.4L Turbo DieselService typeCar idle is rough InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Mercedes-Benz 350SDL Car idle is rough Inspection prices

A rough idling engine can be caused by a number of issues, some of them are serious while others tend to be minor, but the symptoms remain pretty much the same. The car will feel rough and bouncy when the engine is running. The car will also idle below its regular speed, display inconsistent RPMs and may produce a shaking, skipping or slipping sound when the vehicle is running.

While a rough idling engine may seem to be a simple inconvenience it often indicates a deeper problem within the engine. The vehicle should be inspected and repaired as soon as possible because small problems have a way of turning into expensive repairs.

How this system works:

The idle speed of an engine is basically the rotational speed the engine runs on when it is un-coupled from the drivetrain and the throttle pedal is not being depressed. The idle speed is measured in the revolutions per minute of the crankshaft.

When an engine is running at idle speed it generates enough power to smoothly operate equipment such as the water pump, alternator, and power steering but not enough power to move the vehicle itself. A passenger car will usually idle between 600 RPMs and 1000 RPMs. A properly functioning idle should run smoothly without skipping or slipping.

Common reasons for this to happen:

  • Dirty Fuel Injectors: The fuel injection system injects fuel into the cylinders, which creates a mix of air, and fuel to ignite and burn. Fuel injectors have tiny nozzles to spray the fuel into the cylinder and they can become clogged over time.

A clogged or failing fuel injector creates a lack of fuel in the vehicle's engine. This can cause a rough idle, it can also cause symptoms such as slow acceleration or the car not feeling as if it has enough power. If the problem is addressed early, it is possible to clean the injectors, which will restore them to full function. If this condition is not addressed in a timely manner the injectors will need to be replaced.

  • Incorrect Idle Speed: While the average idle speed falls between 600 to 1,000 RPMs, if your vehicle is experiencing a rough idle it could be due to an incorrect idle speed setting. A trained mechanic can easily adjust the idle speed, and it should stay at the proper speed. If an adjusted idle speed becomes inconsistent or changes at random intervals there may be a bigger problem that needs to be explored.

  • Vacuum Leak: If the vacuum system has a leak, it can seriously affect the ability of the vehicle’s computer to regulate the air to fuel ratio. This can lead to a rough idle and if the problem is not addressed the car may experience slow acceleration and a lack of power. Vacuum leaks should be inspected and repaired immediately.

  • Incorrectly Installed or Damaged Plugs: Spark plugs are responsible for creating the spark that allows the vehicle to burn fuel. If spark plugs are improperly installed or malfunctioning, the idle speed can be affected. The vehicle's engine may vibrate or there may be slipping or straining sounds coming from the engine.

  • Defective or Clogged Fuel Pump: A rough idle can be related to fuel delivery issues. The fuel pump, which is responsible for pulling fuel from the gas tank to the fuel injectors, can become clogged or defective. If this happens the engine will not get enough fuel, which can cause a rough idle, sputtering, stalling and even slow acceleration.

  • Clogged Fuel Filter: A clogged fuel filter can cause similar problems. The job of the fuel filter is to screen out contaminants in the fuel, over time it will become clogged and need to be replaced. A rough idle is one symptom of a clogged fuel filter.

  • Failing Electrical Components: A problem or failure in the ignition system or various electronic components can cause a rough idle. If this is the case, the problem will usually get worse as RPMs increase. Common culprits include the ignition control module, plug wires, coils, and spark plugs.

  • Defective Airflow Sensor: A defective airflow sensor can be responsible for a rough idle. A mass airflow sensor detects the amount of air coming into the fuel injection system and sends that information to the vehicle's computer. The computer uses that data to deliver the proper amount of fuel to the air in the vehicle. Over time these sensors can malfunction or become dirty. One of the first symptoms of a malfunctioning airflow sensor is a rough idle. The car may also accelerate slowly and even stutter or stall as the problem progresses.

  • Dirty Oxygen Sensor: Oxygen sensors measure how rich or lean the gases are as they exit the combustion chamber. Depending on the results, the amount of fuel entering the engine is adjusted by the vehicle computer. The ultimate goal is to maintain an ideal mixture that produces the lowest emissions. A dirty or failing oxygen sensor will usually trigger the check engine light and can lead to a rough idle, lower fuel efficiency and failed emission test.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the rough idle issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car for leaks and defective parts. This includes airflow sensors, fuel pump, electronics and other important components related to your car's idling state. It may be necessary to crank the car and test drive it in order to verify the problem and provide an accurate diagnosis.

How important is this service?

A rough idling car is more of an inconvenience at first but if the problem is not solved it can quickly lead to bigger problems such as slow acceleration, stalling and eventually a vehicle that will not start at all. Most of these conditions can make the vehicle dangerous to drive. A rough idle should be inspected and repaired as quickly as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(13)

Rating Summary
12
0
0
0
1
12
0
0
0
1

Kenneth

20 years of experience
795 reviews
Kenneth
20 years of experience
Mercedes-Benz CLK350 V6-3.5L - Car idle is rough - Los Angeles, California
I can not recommend Kenneth enough. Hands down the most honest and efficient mechanic I’ve ever met. Just a good, solid person with a good heart and values!!! You’re lucky if you encounter someone like Kenneth in your life!!

Joel

11 years of experience
156 reviews
Joel
11 years of experience
Mercedes-Benz SLK230 L4-2.3L Turbo - Car idle is rough - Little Elm, Texas
Amazing guy. Very knowledgeable and detailed. He took his time in diagnosing my issue and explained it to me. Looks like I found the perfect mechanic for my car.

Dhakir

26 years of experience
9 reviews
Dhakir
26 years of experience
Mercedes-Benz E350 V6-3.5L - Car idle is rough - Los Angeles, California
Dhakir was great. He arrived on time, was friendly and professional, gave me his qualifications, asked questions and listened to my responses thoughtfully, and provided helpful insights going forward. I was very happy with his service and would happy to use him again.

Napoleon

27 years of experience
147 reviews
Napoleon
27 years of experience
Mercedes-Benz 450SL V8-4.5L - Car idle is rough - Inglewood, California
Napoleon arrived early and was very knowledgeable and provided some great advice as to what to do next. Thank you for your exemplary customer service and attitude Napoleon.

Excellent Rating

(13)

Rating Summary
12
0
0
0
1
12
0
0
0
1
Number of Mercedes-Benz Car idle is rough Inspection services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

What Do Manufacturer Warranties Normally Include?
When When searching for a new or used automobile, having a warranty can be a real game changer. Having a warranty, especially on used vehicles, can give you a cushion to fall back on if your luck were to go...
How to Recognize Brake Pad Wear Patterns
Brake pads apply pressure to the brake rotor to slow or stop a car. Brake pads that are wearing unevenly indicate that your brakes need adjustment.
The Difference Between a Throttle Body Position Sensor & Throttle Body Temperature Sensor
Though both part of the fuel injection system, the TPS and throttle body temp sensor monitor specific aspects of the fuel/air mixture.

How do I lock the glove box?

The glove box has a lock on it so that you can store valuable items in it with extra security. You can lock and unlock the glove box by using the master key, and the lock that is directly next...

What causes code Code 00543 and how to fix?

Hello. The code 00543 (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) stands for "Engine speed to max exceeded". Meaning the computer has detected the engine has crossed over 7200RPMs due to an operating fault. Since you were simply starting the vehicle and backing it up, it...

Had oil changed, filter was not put in correctly and now have a p0014 code.

Hi there. This article on what the P-0014 OBD-II trouble code (https://www.yourmechanic.com/article/p0014-obd-ii-trouble-code-camshaft-position-b-timing-over-advanced-or-system-performance-bank-1-by-jay-safford) is, what causes it and how it is resolved might shed some light on this issue. The only item that may have caused damage to this sensor would...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com