Mercedes-Benz 300SL Exhaust Gas Recirculation/EGR Valve Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Exhaust Gas Recirculation/EGR Valve Replacement Service

How much does a Exhaust Gas Recirculation/EGR Valve Replacement cost?

On average, the cost for a Mercedes-Benz 300SL Exhaust Gas Recirculation/EGR Valve Replacement is $663 with $523 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Mercedes-Benz 300SLL6-3.0LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$1201.54Shop/Dealer Price$1469.48 - $2259.11
1991 Mercedes-Benz 300SLL6-3.0LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$1192.53Shop/Dealer Price$1457.37 - $2244.69
1993 Mercedes-Benz 300SLL6-3.0LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$1192.53Shop/Dealer Price$1457.42 - $2244.76
1990 Mercedes-Benz 300SLL6-3.0LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$1192.53Shop/Dealer Price$1457.42 - $2244.76
Show example Mercedes-Benz 300SL Exhaust Gas Recirculation/EGR Valve Replacement prices

What is the Exhaust Gas Recirculation/EGR Valve all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates the portion of the gasses coming out of the engine by putting in back into the intake manifold, where the engine can burn it again, thereby reducing the emissions.

The EGR valve is located in the engine compartment (underneath the hood). Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will not pass emissions.

Exhaust Gas Recirculation Valve

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), the EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not plugged.
  • Remove and replace the EGR valve.
  • Clean the carbon deposit on EGR pintle.
  • Clear the trouble codes and test for proper operation of EGR valve.

Our recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This will clean out any sludge or carbon build up in the air intake system. Always keep up with regular oil changes; it will help prevent sludge build up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation/EGR Valve?

  • Check Engine light is on.
  • Possible loss of power.
  • Car will not run smoothly (shake, stumble, may stall).

How important is this service?

The EGR valve helps your vehicle recycle gas. The EGR valve is responsible for taking the gas that comes out of the engine, and sending it through the intake manifold, where the engine can utilize it again. Without the EGR valve your vehicle will not recycle and reuse any of its gas, which increases the emissions. Without the EGR, your car will not pass an emission inspection.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(6)

Rating Summary
5
1
0
0
0
5
1
0
0
0

Mike

27 years of experience
265 reviews
Mike
27 years of experience
Mercedes-Benz 300SL L6-3.0L - Air Filter - Westland, Michigan
Terrific professional, he exceeded my expectations!

Edward

43 years of experience
64 reviews
Edward
43 years of experience
Mercedes-Benz 300SL L6-3.0L - power steering leak - Glendale, Arizona

Brian

16 years of experience
60 reviews
Brian
16 years of experience
Mercedes-Benz 300SL L6-3.0L - Oil Change - Fort Lauderdale, Florida

Claud

9 years of experience
640 reviews
Claud
9 years of experience
Mercedes-Benz 300SL L6-3.0L - Loud screeching noise when I start the car - Detroit, Michigan
Thank you for find the problem with my vintage Mercedes-Benz.

Excellent Rating

(6)

Rating Summary
5
1
0
0
0
5
1
0
0
0
Number of Mercedes-Benz 300SL services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Replace Rear Car Brake Shoes
Car brakes consist of disc brakes or drum brakes. Brake shoes are a part of drum brakes and provide the full braking power needed to stop a car.
How to Buy Good Quality Brake Shoes
Most Most cars on the road today have a disc brake system, at least on the front end. Cars used to utilize drum brakes on both front and rear, and some cars today still have a drum system in the...
How to Buy a Good Quality Car Roof Rack
If If your car didn’t come with a roof rack from the automaker, don’t worry. There’s still hope. You can purchase an aftermarket roof rack. These will give you the ability to carry loads on the top of your car,...

My car jerks when it reaches 2000 rpms, what could the cause of this be?

Hi there, thanks for writing in. There are a lot of potential causes of this problem, all of which are hard to diagnose without being in front of the car. It could have a failing mass air flow sensor, a...

Constant knocking sound from engine

Hello and thank you for contacting YourMechanic. The knocking sound is coming from the flex plate in the back of the engine. The flex plate is what drives the torque converter to the transmission. The flex plate is probably cracked...

Does a 1998 Dodge Dakota SLT automatic transmission have differential fluid? Do i add it or is it called something?

The automatic transmission in your vehicle uses ATF+4 automatic transmission fluid. The differential uses GL-5 80W-90 gear oil, with a friction modifier if you've got a limited slip rear end.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com