Mercedes-Benz 300D Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(14)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(14)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Mercedes-Benz 300D Fuel Injector Replacement is $803 with $663 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Mercedes-Benz 300DL5-2.5L Turbo DieselService typeFuel Injector ReplacementEstimate$1632.96Shop/Dealer Price$2008.75 - $3121.95
1992 Mercedes-Benz 300DL5-2.5L Turbo DieselService typeFuel Injector ReplacementEstimate$1726.14Shop/Dealer Price$2101.09 - $3213.65
1993 Mercedes-Benz 300DL5-2.5L Turbo DieselService typeFuel Injector ReplacementEstimate$1726.14Shop/Dealer Price$2101.16 - $3213.78
1991 Mercedes-Benz 300DL5-2.5L Turbo DieselService typeFuel Injector ReplacementEstimate$1623.95Shop/Dealer Price$1996.69 - $3107.60
Show example Mercedes-Benz 300D Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(14)

Rating Summary
13
0
0
0
1
13
0
0
0
1

Richard

31 years of experience
4 reviews
Richard
31 years of experience
Mercedes-Benz 300D L5-3.0L Diesel - Car is not shifting into park - Fort Myers, Florida
Very knowledgeable and patient in trying to solve problem. He provided good information for me to follow up with repairs.

Chris

17 years of experience
47 reviews
Chris
17 years of experience
Mercedes-Benz 300D L5-3.0L Turbo Diesel - Water Pump - Castro Valley, California
Chris was great to work with.

Kiri

21 years of experience
372 reviews
Kiri
21 years of experience
Mercedes-Benz 300D L5-3.0L Diesel - Pre-purchase Car Inspection - Philadelphia, Pennsylvania
Kiri was very responsive and was available by text and phone as well. Thank you!

Ricardo

15 years of experience
339 reviews
Ricardo
15 years of experience
Mercedes-Benz 300D L5-3.0L Diesel - Brake Pads Replacement (Front, Rear) - Rancho Palos Verdes, California
Very courteous. Took care to explain every issue he encountered.

Excellent Rating

(14)

Rating Summary
13
0
0
0
1
13
0
0
0
1
Number of Mercedes-Benz 300D services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Get a Kansas Driver's Permit
Kansas Kansas requires that all new drivers participate in a Graduated Driver Licensing program. The first step in this program is to obtain a learner’s permit, that graduates to a full license as the driver gains experience and age, to...
How Long Does a Tailgate Lock Cylinder Last?
SUVs SUVs come in a range of shapes and sizes, but almost all of them have one thing in common – they have a rear tailgate. You might call it a hatch, or the rear door, but it boils down...
10 Best Stores to Buy Auto Parts in Fort Worth, Texas
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Fort Worth is O’Reilly Auto Parts.

Getting Engine light code P0430

The definition for the code P0430 is a problem with the catalyst or the sensors that keep track of its operation. An experienced technician will, such as one from YourMechanic, be able to identify the problem component. In many cases,...

Engine lost power, but then started after sitting for a while.

Hello, There are many things that could cause your vehicle to lose power as you describe, however what you are describing sounds like potentially a failing ignition coil. A failing ignition coil will often times produce a symptom as you...

Spoke with David earlier tried the spray fluid suggested but it did nothing. Again fuel pump comes in when key is turned, tested fuel pressure an it showed 40 can the fuel filter be clogged if I have good pressure or not. What other than that could it be to not allow it to crank

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com