Mazda B2500 Steering wheel feels loose Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(21)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(21)

Steering wheel feels loose Inspection Service

How much does a Steering wheel feels loose Inspection cost?

On average, the cost for a Mazda B2500 Steering wheel feels loose Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Mazda B2500L4-2.5LService typeSteering wheel feels loose InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
2001 Mazda B2500L4-2.5LService typeSteering wheel feels loose InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
2000 Mazda B2500L4-2.5LService typeSteering wheel feels loose InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
1998 Mazda B2500L4-2.5LService typeSteering wheel feels loose InspectionEstimate$104.99Shop/Dealer Price$113.39 - $119.68
Show example Mazda B2500 Steering wheel feels loose Inspection prices

A steering wheel that feels loose or has “play” in it prevents the driver form getting an accurate interpretation of how the wheels are turned. Any steering setup where you can move the wheel more than one to one and a half inches without moving the wheels is too lose and may have an issue. When the steering wheel feels loose it can be difficult from drivers to accurately know the position of the front wheels. This lack of responsiveness can be dangerous for drivers, especially in heavy traffic or winding roads.

How this system works:

The majority of modern vehicles use two different kinds of steering setup to help control the movement of the car. Rack and pinion steering is typically used on cars, small trucks and SUVs, while recirculating-ball steering is used on large SUVs and trucks. The similarities and differences in the two systems begin to manifest themselves when components fail, causing the steering wheel to feel loose.

Common reasons for this to happen:

  • Worn Tie Rods: Tie rods serve as the driver’s connection between the steering unit and the tires. Tie rods are present in both rack and pinion and recirculating ball setups. If tie rod ends become worn, they may cause the steering wheel to feel loose. A vehicle with worn tie rods may also squeak as the steering wheel is turned and be out of alignment.

  • Worn Pitman Arm: A pitman arm is only present in vehicles with recirculating-ball steering. The pitman arm connects a gear attached to the steering wheel to the steering rack itself. When the pitman arm becomes worn or the teeth in the gear connecting the pitman arm begin to slip, it can cause the steering wheel to feel loose.

  • Worn Ball Joint: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. A ball joint that is worn may cause the steering to feel loose and may also create a banging sound, especially when going over bumps.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the loose-feeling steering. The mechanic will then provide a detailed inspection report outlining the reason for the loose steering and the cost of any repairs that need to be made.

How it's done:

When the mechanic arrives, he or she will first lift the vehicle and remove the wheels so that they can better access the suspension and steering components. From here, the mechanic will be able to assess the reason why the steering has become loose.

If the mechanic suspects that worn tie rods may be the issue, he or she will inspect the tie rod for superficial damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

If the mechanic believes that the pitman arm has become worn, he or she will remove the pitman arm from the track bar and replace it with a new pitman arm. The mechanic should ensure that the new part is properly tightened.

If the mechanic suspects worn ball joints, he or she will remove the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

In the case of all repairs the mechanic will make sure that all the new parts have been installed correctly and are properly lubricated. In order to ensure that the steering is working properly, the mechanic may test drive the vehicle to check for excess play.

How important is this service?

A steering wheel that feels loose may not be giving an accurate indication of the front wheel’s position. Loose-feeling steering may also indicate that a problem has occurred with the steering unit or suspension. If you notice that the steering does not seem to be as responsive, you should stop driving the vehicle and have it inspected by a mechanic.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(21)

Rating Summary
20
1
0
0
0
20
1
0
0
0

Jamie

22 years of experience
120 reviews
Jamie
22 years of experience
Mazda B2500 L4-2.5L - Steering wheel feels loose Inspection - Hemet, California
.

Christopher

12 years of experience
154 reviews
Christopher
12 years of experience
Mazda B2500 L4-2.5L - Car is not starting - Charlotte, North Carolina
10

Patrick

32 years of experience
369 reviews
Patrick
32 years of experience
Mazda B2500 L4-2.5L - Smoke from engine or exhaust - Las Vegas, Nevada
Patrick was an excellent mechanic he was very professional and did a thorough examination my truck I would definitely recommend him

Alex

15 years of experience
89 reviews
Alex
15 years of experience
Mazda B2500 L4-2.5L - Oil Change - Round Rock, Texas
Great job by Alex and easy experience. Very convenient. He was quick, in time and communicated with.me about my car. Much better than the repair shop.

Excellent Rating

(21)

Rating Summary
20
1
0
0
0
20
1
0
0
0
Number of Mazda B2500 services completed
231+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

Minnesota Parking Laws: Understanding the Basics
Knowing Knowing how and where to park legally in Minnesota is just as important as knowing the rules of being on the road, such as the speed limits and proper signaling and lane changing procedures. If you park in the...
How To Fix Common Electric Window Issues
Sometimes, Sometimes, your car needs fixes that are more about convenience than anything else, and this is true in the case of a broken component (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-power-window-switch) in a window. If your window is stuck down, you can sometimes help it...
P3418 OBD-II Trouble Code: Cylinder 3 Deactivation/Intake Valve Control Performance
What What the P3418 code means This code indicates that there is a problem with your intake valve on cylinder number 3. Your vehicle’s control module detects that the measured values from the TP sensor, MAP sensor, and MAF sensor...

Satellite radio error codes

While your car’s satellite radio should operate without any problems for the most part, there are a number of codes and messages that may be displayed on the screen. Understanding these is important. Here’s what you should know: Acquiring: This...

How do I turn on the hazard lights?

The hazard lights are an important safety feature. When the hazards are turned on, all four turn signal lights flash simultaneously, to alert surrounding drivers that there may be an emergency. To turn on the hazard lights, press the Hazard...

Truck running hot. Already changed water pump, thermostat, and heater hose. No water in my oil. Still running hot

You will need to have your cooling fan clutch checked for lock up. If the clutch is replaced from lack of lock up when it gets hot then have the radiator (https://www.yourmechanic.com/services/radiator-replacement) checked for coolant flow through all the passages....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com