Mazda 2 Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(62)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(62)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Mazda 2 Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Mazda 2L4-1.5LService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2012 Mazda 2L4-1.5LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2011 Mazda 2L4-1.5LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2013 Mazda 2L4-1.5LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Mazda 2 Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(62)

Rating Summary
57
3
1
0
1
57
3
1
0
1

Mike

13 years of experience
176 reviews
Mike
13 years of experience
Mazda 2 L4-1.5L - Oil Change - Raleigh, North Carolina
Great service

Andrew

11 years of experience
337 reviews
Andrew
11 years of experience
Mazda 2 L4-1.5L - Tie Rod End Replacement (Front Right Inner) - Pasadena, Maryland
Great Service! Drew is very knowledgeable. I highly recommend him, and will recommend to everyone.

David

13 years of experience
396 reviews
David
13 years of experience
Mazda 2 L4-1.5L - Oil Change - Marietta, Georgia
FANTASTIC!

John

10 years of experience
52 reviews
John
10 years of experience
Mazda 2 L4-1.5L - Cabin Air Filter - San Diego, California
knowledgeable, fast and friendly.

Excellent Rating

(62)

Rating Summary
57
3
1
0
1
57
3
1
0
1
Number of Mazda 2 services completed
682+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

P0056 OBD-II Trouble Code: HO2S Heater Control Circuit (Bank 2 Sensor 2)
P0056 P0056 trouble code definition The P0056 trouble code signifies that there is a problem with the heater control circuit in the bank 2 sensor 2 oxygen sensor. What the P0056 code means This code means that the bank 2...
How to Transfer Your License Plate Number From Your Old Car to Your New One
If you have a personalized license plate (https://www.yourmechanic.com/article/how-to-get-a-personalized-license-plate-in-south-carolina), you likely will want to transfer your license plate number when you purchase a new vehicle. Transferring your personalized license plate allows you to keep the unique and meaningful specialized plate on...
How to Replace a Coolant Vacuum Valve Switch
A vacuum line attaches to the vacuum switch in your car as part of the engine’s heating and cooling system. A faulty switch can break your heater.

Rear trunk latch not working right

Hi there. The electronic truck latch is operated by an electronic actuator much like the locks on your door. Like many electronic devices, repeated usage wears it out over time. Some actuators can be replaced independently and some require it...

why does my car sound like it is going over rumble strips when I pick up my mph-

Hello there, a variety of issues will cause your 2009 Honda Pilot to have a loud noise that increases with speed. The rumble strips generally cause a loud growling noise when driven over. Common problems that will cause a growling...

2014 hyundai elantra se Electric power steering light turned on. How much will it cost to get it fixed?

Hi...I will try to address your concerns and, as well, obviously you can request an electric power steering diagnostic (https://www.yourmechanic.com/services/steering-wheel-is-hard-to-turn-inspection) which will get you a really quick and precise answer as to cost because the mechanic will be able to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com