Lincoln Navigator Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(270)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(270)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Lincoln Navigator Valve Cover Gasket Replacement is $682 with $38 for parts and $644 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Lincoln NavigatorV8-5.4LService typeValve Cover Gasket ReplacementEstimate$1322.08Shop/Dealer Price$1500.09 - $1967.48
2010 Lincoln NavigatorV8-5.4LService typeValve Cover Gasket ReplacementEstimate$1173.23Shop/Dealer Price$1313.41 - $1700.74
2013 Lincoln NavigatorV8-5.4LService typeValve Cover Gasket ReplacementEstimate$1173.23Shop/Dealer Price$1313.62 - $1701.11
2012 Lincoln NavigatorV8-5.4LService typeValve Cover Gasket ReplacementEstimate$1173.23Shop/Dealer Price$1313.61 - $1701.08
1999 Lincoln NavigatorV8-5.4LService typeValve Cover Gasket ReplacementEstimate$1592.28Shop/Dealer Price$1757.28 - $2152.58
2014 Lincoln NavigatorV8-5.4LService typeValve Cover Gasket ReplacementEstimate$1173.23Shop/Dealer Price$1314.74 - $1703.07
2007 Lincoln NavigatorV8-5.4LService typeValve Cover Gasket ReplacementEstimate$1348.42Shop/Dealer Price$1492.86 - $1883.38
2001 Lincoln NavigatorV8-5.4LService typeValve Cover Gasket ReplacementEstimate$1745.92Shop/Dealer Price$1929.73 - $2425.56
Show example Lincoln Navigator Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lincoln mechanics

Real customer reviews from Lincoln owners like you.

Excellent Rating

(270)

Rating Summary
252
10
3
0
5
252
10
3
0
5

Juan

10 years of experience
47 reviews
Juan
10 years of experience
Navigator 2001 - Coolant Reservoir - Suisun City, CA
Extremely honest. Determined one of my hoses was still in great shape and reduced my bill. I completely trust him with my cars. Very professional and polite.

Juan

10 years of experience
47 reviews
Juan
10 years of experience
Navigator 2001 - Heater Hoses - Suisun City, CA
Extremely honest. Determined one of my hoses was still in great shape and reduced my bill. I completely trust him with my cars. Very professional and polite.

Daniel

8 years of experience
18 reviews
Daniel
8 years of experience
Navigator 2012 - Fuel Injector - Fort Lauderdale, FL
Very professional, knowledgeable and friendly.

Leo

17 years of experience
80 reviews
Leo
17 years of experience
Navigator 2015 - Brakes, Steering and Suspension Inspection - Greensboro, NC
Very professional, also very friendly. I enjoyed working with my mechanic.. Thank you

Excellent Rating

(270)

Rating Summary
252
10
3
0
5
252
10
3
0
5
Number of Lincoln Navigator services completed
2970+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lincoln MECHANICS
700+
experts on our platform

Recent articles & questions

Is It Safe to Drive While Taking Antidepressants?
In In the United States today, one in ten people take antidepressants. And 90% of Americans drive. That adds up to a whole lot of people on the road who are using anti-depressant medication. Is this safe? Well, in controlled...
The 10 Worst Cities to Drive In
Highly populated cities can be some of the worst areas to drive in. Chicago has traffic for 12 hours a day and parking can be difficult to find.
How Long Does an Anti-Lock Fuse or Relay Last?
Today, Today, vehicles have braking systems that are far superior to what they used to be. Late-model cars still have traditional braking systems, but they are backed up by ABS systems that prevent your wheels from locking up when you...

Transmission issue after a long drive

A few different faults can cause rough shifting after the vehicle warms up like this. The most likely would be the transmission fluid level, transmission filter (https://www.yourmechanic.com/article/how-long-does-a-transmission-filter-last), shift solenoids (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-shift-interlock-solenoid), torque converter, or the transmission linkage. Any of these, once...

Bad gas mileage, high idling

Idle speed for your vehicle should be between 725 and 750 RPM. So, it is idling high. Common causes for this include vacuum leaks and a faulty idle air control (IAC) valve. Either of these issues could also affect fuel...

Car self-accelerates intermittently

Hello. The odor of oil is merely coincidental to the symptoms you report. Any vehicle of that vintage is going to have multiple oil leaks unless the engine has been re-sealed or re-built. Just be sure the leak is not...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com