Lincoln MKS Car starts and then dies Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(50)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(50)

Car starts and then dies Inspection Service

How much does a Car starts and then dies Inspection cost?

On average, the cost for a Lincoln MKS Car starts and then dies Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Lincoln MKSV6-3.7LService typeCar starts and then dies InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2013 Lincoln MKSV6-3.5L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2012 Lincoln MKSV6-3.7LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2011 Lincoln MKSV6-3.7LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2015 Lincoln MKSV6-3.5L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2014 Lincoln MKSV6-3.7LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2010 Lincoln MKSV6-3.7LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2011 Lincoln MKSV6-3.5L TurboService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Lincoln MKS Car starts and then dies Inspection prices

Starting a vehicle only to have it quit immediately after can be confusing and annoying for many drivers especially if their vehicle has not experienced this type of issue before. Typically, a vehicle will start and then quit because of an issue with the fuel or electrical system. It is important to monitor fuel levels as well as warning lights which can signal to the driver that a vehicle may quit unexpectedly.

How this system works:

To start a vehicle, the electrical system, composed of the battery and starter, turns the engine over. Once running, the engine requires a constant flow of gasoline and good spark to keep that fuel igniting. If gasoline is not readily available, or if there is not enough spark, the engine will quit. More modern vehicles with sophisticated computers may affect the way the vehicle runs. These computers help the car run efficiently but can also shut a car down if the fuel/air mixture is not correct. While an older vehicle may be less sophisticated and easier to diagnose, the computers on modern cars can provide more specific information when connected to a code scanner/reader.

Common reasons for this to happen:

  • Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so that the right amount of fuel can be delivered from the fuel injectors. When a sensor begins to fail, the vehicle’s computer may generate an error code to indicate that something has gone wrong. An issue with the mass airflow sensor may manifest itself when a car starts and then stalls soon after starting.

  • Fuel Pump Relay: The fuel pump relay functions much like a fuse for an electric fuel pump. The fuel pump relay engages as the vehicle is started and starts the fuel pump. While the vehicle is running, the fuel pump relay turns off and the fuel pump is powered by the oil pressure sending unit. If the vehicle’s computer is unable to keep the fuel pump relay running throughout the starting process, the vehicle may start and quit immediately after starting.

  • Ignition Coil: Your vehicle’s ignition coil takes the low voltage of the battery and provides the thousands of volts needed to create a spark in the spark plugs. When an ignition coil begins to fail, it may struggle to provide consistent spark to the plugs, causing the engine to stall after starting.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why the vehicle starts and then dies. The mechanic will then provide a detailed inspection report outlining why the vehicle quit and the cost of any repairs that need to be made.

How it's done:

A mechanic will begin diagnosing your vehicle’s issue by plugging a code reader/scanner into the vehicle’s computer. The mechanic should be able to get more information from your vehicle’s computer on what component has failed. Using this information, the mechanic can begin necessary repairs.

If your vehicle has a bad or failing mass airflow sensor, the mechanic will begin by finding the sensor in the engine bay and checking for any signs of failure. The mechanic should check the wire harness connected to the sensor to ensure that all of wires are properly connected. After removing the sensor, the mechanic should be able to discover the nature of the failure and replace the sensor.

If the mechanic suspects an issue with the fuel pump relay, he or she should check the vehicle’s computer for a problem. If the vehicle’s computer is having difficulty providing consistent power to the fuel pump relay, the computer may need to be reprogrammed or replaced. If the vehicle’s computer is functioning normally, the mechanic may need to replace the fuel pump relay.

If the mechanic suspects that the ignition coil may be faulty, he or she should first disconnect the battery before beginning work. The mechanic should then begin the process of disconnecting wires from the ignition coil and removing it from the engine bay. The mechanic will then install the new ignition coil and ensure that it is connected properly. The mechanic should then reconnect the battery and test the new coil.

With all repairs, the mechanic will ensure the newly installed parts work properly. The mechanic can then turn off and warning lights that may have come on while the vehicle was not running properly.

How important is this service?

If your vehicle is starting but dying soon after starting, you should have it checked out by a mechanic. Issues involving the fuel management and electrical systems will become worse if not dealt with. Diligence and paying attention to warning lights may help prevent further damage to critical engine component and may save money in repairs. A vehicle that quits after starting can be inconvenient and having a mobile mechanic inspect and repair you vehicle will ensure that you and your vehicle are back on the road soon.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lincoln mechanics

Real customer reviews from Lincoln owners like you.

Excellent Rating

(50)

Rating Summary
45
4
0
1
0
45
4
0
1
0

MICHAEL

33 years of experience
184 reviews
MICHAEL
33 years of experience
Lincoln MKS V6-3.5L Turbo - Check Engine Light is on - Philadelphia, Pennsylvania
Michael was very professional and precise with his explanations would do business with him anytime

Peter

21 years of experience
23 reviews
Peter
21 years of experience
Lincoln MKS V6-3.5L Turbo - Clicking or popping sound is coming from wheels Inspection - Carpentersville, Illinois
Good

Erick

10 years of experience
182 reviews
Erick
10 years of experience
Lincoln MKS V6-3.7L - Oil Change - San Jose, California

Attila

19 years of experience
917 reviews
Attila
19 years of experience
Lincoln MKS V6-3.7L - Pre-purchase Car Inspection - Union City, New Jersey
Thank you for sending Attila to perform the Pre-purchase. He was thorough, knowledgeable and a good command of his craft. His inspection made my decision to purchase this vehicle stress free. He is the one to refer to clients seeking such a service I required. Polite, respectful and insightful, with good advice.

Excellent Rating

(50)

Rating Summary
45
4
0
1
0
45
4
0
1
0
Number of Lincoln MKS services completed
550+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lincoln MECHANICS
700+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Gas Can In Your Car?
At At some point in your life, you may run out of gasoline while you are driving your car. When this happens, most people fill their gas tank up with the red plastic gas cans. But are these actually safe...
Child Seat Safety Laws in Minnesota
In In the state of Minnesota, there are regulations in place that are designed to protect children when they are travelling in motor vehicles. These laws regulate the use and installation of child safety seats, and they must be obeyed...
P2176 OBD-II Trouble Code: Throttle Actuator Control System - Idle Position Not Learned
P2176 Code Definition Throttle Actuator Control System - Idle Position Not Learned What the P2176 code means The P2176 trouble code indicates...

Car will not shift into gears above 2nd gear.

Hello, your transmission is electronically controlled so there can be a different problem with the same outcome. There is a transmission control unit that controls two electronic solenoids that control fluid flow to the valve body. Your transmission has solenoids...

How do I adjust the volume?

The volume of your sound system is adjusted via the volume control knob, which is on the top left corner of the system, and is also the power button. Rotate the knob clockwise to increase the volume, or rotate the...

Bank 1 too lean, cylinder 1 misfire.

Hi there. There are several possible sources that trigger these two codes including a faulty fuel pressure regulator, weak fuel pump, clogged fuel filter, faulty powertrain control module, vacuum leak, faulty injector(s), faulty oxygen sensor(s) and a faulty mass air...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com