Lexus RX300 Brake Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(324)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(324)

Brake Hose Replacement Service

How much does a Brake Hose Replacement cost?

On average, the cost for a Lexus RX300 Brake Hose Replacement is $202 with $50 for parts and $152 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Lexus RX300V6-3.0LService typeBrake Hose - Passenger Side Front ReplacementEstimate$318.92Shop/Dealer Price$380.66 - $502.87
2003 Lexus RX300V6-3.0LService typeBrake Hose - Driver Side Rear ReplacementEstimate$275.60Shop/Dealer Price$334.56 - $448.32
2000 Lexus RX300V6-3.0LService typeBrake Hose - Driver Side Rear ReplacementEstimate$275.60Shop/Dealer Price$334.56 - $448.31
2003 Lexus RX300V6-3.0LService typeBrake Hose - Passenger Side Rear ReplacementEstimate$251.58Shop/Dealer Price$304.47 - $400.16
1999 Lexus RX300V6-3.0LService typeBrake Hose - Passenger Side Rear ReplacementEstimate$251.58Shop/Dealer Price$304.58 - $400.35
2000 Lexus RX300V6-3.0LService typeBrake Hose - Passenger Side Front ReplacementEstimate$286.92Shop/Dealer Price$348.71 - $470.95
2001 Lexus RX300V6-3.0LService typeBrake Hose - Passenger Side Front ReplacementEstimate$294.92Shop/Dealer Price$356.33 - $478.28
2003 Lexus RX300V6-3.0LService typeBrake Hose - Driver Side Front ReplacementEstimate$294.92Shop/Dealer Price$357.37 - $480.11
Show example Lexus RX300 Brake Hose Replacement prices

What is the brake hose and how does it work?

The hydraulic steel brake lines that carry brake fluid in your car are bolted to the frame of the vehicle. These metal brake lines must eventually attach to the individual wheel calipers — or wheel cylinders in the case of drum brakes — at all four wheels. Since the wheels constantly move up and down, or left and right in the case of the front wheels, the brake line that attaches to the individual wheel calipers must be highly flexible. Enter the brake hose: a flexible, synthetic, reinforced-rubber hose designed to withstand the 1,000 PSI plus pressures that occur when you apply the brakes. There is at least one brake hose at each wheel position, and sometimes two depending on the suspension design. At the end of each rubber hose are steel connections with seals to maintain a leak-proof connection.

Brake Hoses

When to consider replacing the brake hose:

  • Physical damage. If there are cuts, cracks, abrasions, bulging, or excessive rust at the hose fitting ends, the hose should be replaced.
  • Leaks. Seepage at hose fittings, or leaks anywhere along the hose, requires replacement. If there is a leak, or the hose is bulging, you may notice that the brake pedal is lower than usual or spongy.
  • Internal hose failure. Occasionally, the lining on the interior of the hose can separate, blocking the flow of hydraulic fluid. This is diagnosed using test gauges. A fluid blockage that prevents the brakes from releasing may manifest itself as dragging brakes or overheated brakes.
  • End of Lifetime. Although many brake hoses can last 20 plus years if well-made out of quality materials, after 10 years of service it is best to replace the hoses with new ones for maximum reliability and safety.

How do mechanics replace the brake hose?

  • The vehicle is jacked up and safely supported with steel jack stands.
  • The wheel and tire assembly are removed.
  • A pan is put in place to catch brake fluid.
  • Residual pressure in the brake line is relieved by momentarily opening the brake caliper bleeder screw.
  • Each hose end is detached. At the caliper, the attachment is often a banjo style bolt with one-time-use copper washers. The attachment at the vehicle frame is typically a flare connection, so a tube nut must be loosened. Once both ends are detached, the hose is removed.
  • The new hose is installed using new copper-sealing washers and the factory OEM torque on the tube nut and the banjo bolt.
  • Finally, the brake system is bled to remove all air and the vehicle is road tested. A final check for leaks is performed after the road test.

Is it safe to drive with a brake hose problem?

No. Properly working brakes are always essential. If you suspect damage to the brake hoses or see leaks it is a good idea to have a professional evaluate your car’s brakes.

When replacing a brake hose keep in mind:

  • If a brake hose is replaced due to aging, the mechanic will check all of the other brake hoses as they may be worn or defective as well.
  • Some vehicles have flexible, braided stainless steel brake hoses, or other specially designed hoses. If your car does not have ordinary synthetic rubber hoses, a mechanic will let you know what type of new brake hose you have and what your replacement options are.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(324)

Rating Summary
304
10
2
1
7
304
10
2
1
7

Dellano

18 years of experience
509 reviews
Dellano
18 years of experience
Lexus RX300 V6-3.0L - 50 Point Inspection - Washington, District of Columbia
He was very knowledgable and did a good job looking over the car to see what needed attention.

Jeffrey

27 years of experience
870 reviews
Jeffrey
27 years of experience
Lexus RX300 V6-3.0L - AC Compressor - Charlotte, North Carolina
very knowledgeable. Came prepared. got down to business. will call on him again.

Augustine

12 years of experience
129 reviews
Augustine
12 years of experience
Lexus RX300 V6-3.0L - Car is not starting - Albuquerque, New Mexico
Super knowledgeable and honest. Very nice guy.

Leo

5 years of experience
8 reviews
Leo
5 years of experience
Lexus RX300 V6-3.0L - Car is not starting - Los Angeles, California
Leo was wonderful and so hospitable. He listened attentively and took thorough note and action about my car's issues. He helped me understand my car and situation well and was very helpful with guiding me through taking care of my care afterwards. Great service!

Excellent Rating

(324)

Rating Summary
304
10
2
1
7
304
10
2
1
7
Number of Lexus RX300 services completed
3564+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

Is It Safe to Drive With a Cracked Windshield?
Your Your windshield is there to block wind, rain, sleet and snow while providing you with visibility. However, it’s made of glass, and glass is inherently fragile (even today’s tempered safety glass). A single rock is all it takes to...
Disability Driver Laws and Permits in Missouri
Even Even if you are not a disabled driver, it is important to familiarize yourself with the disabled driver laws in your state. Missouri, as is true of all states, has very specific guidelines for what disabled drivers. How do...
P0580 OBD-II Trouble Code: Cruise control Multi-Function Input "A" Circuit Low
P0580 P0580 OBD-II Trouble Code: Cruise control Multi-Function Input "A" Circuit Low Diagnostic Trouble Code (DTC): P0580 P0580 code definition A P0580 code means that the PCM has found an electrical problem with the multi-function input circuit in the vehicle’s...

How do you work the manual rearview mirror?

Your car’s rearview mirror provides essential visibility out of the back window. However, you will need to adjust it periodically, as well as after anyone else has driven the car. Here’s what you need to do: Grasp the mirror by...

I have a Mitsubishi Diamante 2000 LS with 197,450 miles and I'm not sure if my transmission blew or if it's something else.

I would not suspect the transmission is bad just from hitting a bump. It is most likely a wire connection came loose or something else minor. You will need to have the car checked to see what happened by a...

I've got a 2003 Buick Century 3.1 engine. I have replaced the head gaskets, radiator, thermostat, water pump,and heater core and a

This is usually caused by air pockets in the system. Purge air from the cooling system and see if this fixes the problem. You may have a slipping serpentine belt and should check it for slipping.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com