Lexus RC300 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Lexus RC300 Wheel Bearings Replacement is $410 with $256 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Lexus RC300L4-2.0L TurboService typeWheel Bearings - Passenger Side Front ReplacementEstimate$989.72Shop/Dealer Price$1198.49 - $1815.87
2018 Lexus RC300L4-2.0L TurboService typeWheel Bearings - Driver Side Front ReplacementEstimate$979.81Shop/Dealer Price$1186.63 - $1802.56
2018 Lexus RC300L4-2.0L TurboService typeWheel Bearings - Driver Side Rear ReplacementEstimate$1085.15Shop/Dealer Price$1311.40 - $1984.74
2018 Lexus RC300V6-3.5LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$1085.15Shop/Dealer Price$1311.40 - $1984.73
2018 Lexus RC300V6-3.5LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$1085.15Shop/Dealer Price$1313.32 - $1988.09
2018 Lexus RC300V6-3.5LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$673.57Shop/Dealer Price$804.01 - $1190.40
2018 Lexus RC300V6-3.5LService typeWheel Bearings - Driver Side Front ReplacementEstimate$673.57Shop/Dealer Price$803.87 - $1190.16
2018 Lexus RC300L4-2.0L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$1085.15Shop/Dealer Price$1311.40 - $1984.73
Show example Lexus RC300 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0

Kevin

25 years of experience
651 reviews
Kevin
25 years of experience
Lexus RC300 V6-3.5L - Oil Change - Alpharetta, Georgia
He arrived early, performed my oil change quickly, and was very professional throughout.

Kevin

25 years of experience
651 reviews
Kevin
25 years of experience
Lexus RC300 V6-3.5L - Oil Change - Alpharetta, Georgia
I’ve been using him for years. Very diligent and reliable.

Wesley

17 years of experience
277 reviews
Wesley
17 years of experience
Lexus IS250 V6-2.5L - Wheel Bearings Replacement (Passenger Side Rear) - Aurora, Colorado
Wes showed up on time quickly assessed the situation and began work, as a matter of fact, he finished ewhichballoh allowed me to enjoy the rest of my day.

Paul

11 years of experience
38 reviews
Paul
11 years of experience
Lexus RX300 V6-3.0L - Wheel Bearings Replacement (Driver Side Front) - Austin, Texas

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0
Number of Lexus Wheel Bearings Replacement services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

What Causes Leakage in the Shock Absorbers?
Every car, truck, and utility vehicle sold today has at least one shock absorber (informally known as a shock) for each of its...
How to Install Air Ride Suspension
Air ride suspension systems help balance and weight and can give a softer ride. Air systems contain a height sensor, an air bag and air strut.
P2667 OBD-II Trouble Code: Fuel Shutoff Valve B Control Circuit High
P2667 means there is a problem with the fuel shut off valve usually after a rear end collision or other electrical issues or problem.

While driving car lost power then died and now won't start

There are several possible causes that keep a vehicle from starting. It would first be necessary to find out what the root problem is, meaning, for an engine to start and run, it needs fuel, air, and spark. To find...

My car says 5% oil life change soon. How soon is soon? I have a 2008 ford tauras X

Hi There, Your oil life percentage is generally an estimated time designed to prompt the operator of the vehicle to have the oil changed as soon as possible. 5% is generally not something to be concerned about, but you should...

Crank no start

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com