Lexus NX300 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Lexus NX300 Wheel Bearings Replacement is $433 with $279 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Lexus NX300L4-2.0L TurboService typeWheel Bearings - Passenger Side Front ReplacementEstimate$1242.56Shop/Dealer Price$1514.54 - $2321.55
2018 Lexus NX300L4-2.0L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$748.51Shop/Dealer Price$890.57 - $1311.40
2018 Lexus NX300L4-2.0L TurboService typeWheel Bearings - Driver Side Front ReplacementEstimate$1232.65Shop/Dealer Price$1502.71 - $2308.29
2018 Lexus NX300L4-2.0L TurboService typeWheel Bearings - Driver Side Rear ReplacementEstimate$748.51Shop/Dealer Price$890.60 - $1311.45
Show example Lexus NX300 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Michael

7 years of experience
142 reviews
Michael
7 years of experience
Lexus NX300 L4-2.0L Turbo - Service Battery/cables - Renton, Washington
I would give Michael 10 stars if I could. He did a phenomenal job and my car is back up and running again. He went above and beyond to assist me. Thank you, Michael and I will use him again, if I am in need.

Elias

15 years of experience
225 reviews
Elias
15 years of experience
Lexus NX300 L4-2.0L Turbo - Oil Change - New York, New York
Quick and accommodating.

Chris

17 years of experience
340 reviews
Chris
17 years of experience
Lexus NX300 L4-2.0L Turbo - Oil Change - San Diego, California
Great service as usual. I would wait for him to be available in my area, than getting another mechanic.

Jeremy

21 years of experience
802 reviews
Jeremy
21 years of experience
Lexus NX300 L4-2.0L Turbo - Oil Change - Boynton Beach, Florida
Great timely convenient service

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Lexus NX300 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

P0361 OBD-II Trouble Code: Ignition Coil K Primary / Secondary Circuit Malfunction
Trouble code P0361 means that a malfunction in an ignition coil, often due to an open or short in the driver circuit.
Is It Unsafe to Continue Driving a Vehicle with Broken Wheel Speed Sensors?
Car wheel speed sensors are an important safety feature. It helps the ABS system work when you need to make an emergency stop.
A Buyer’s Guide to the 2012 Volkswagen Touareg Hybrid
Whether Whether you’re new to the hybrid wave or an old hat, the 2012 Volkswagen Touareg Hybrid gives you exactly what you’re looking for – a comfortable, luxurious ride that provides decent fuel economy. Key Features This hybrid option from...

Idrive and TPI malfunction.

Hello. From what you describe it would appear that your vehicle is experiencing some sort of electrical issues. If the Idrive system is not working properly then it may be possible that the Idrive computer has failed, or possibly the...

Why does my car throw throttle body and traction control codes, when decelerating?

Hi there. In the case where an aftermarket throttle body is used as a replacement of an OEM component, these type of problems are common. The typical solution is reprogramming the ECU, but that's something done at a dealership. I...

Rear wheel getting hot after caliper and hose replacement

There are a few reasons that a caliper piston might fail to retract and there is also the possibility that the heat is being generated by a failing wheel bearing. If the issue is brake related, pressure in the line...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com